Which one is not an energy consumption benchmark parameter? a) kcal/kWh of electricity generated b) kg/ oC. c) kW/ton of refrigeration d) kWh/kg of yarn

Which one is not an energy consumption benchmark parameter?

a) kcal/kWh of electricity generated b) kg/ oC.

c) kW/ton of refrigeration d) kWh/kg of yarn
by

1 Answer

Answer :

b) kg/ oC.
by

Related questions

The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Description : The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Last Answer : d) kW / Ton of Refrigeration

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with increase in its temperature c) higher the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Description : Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with ... the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Last Answer : c) higher the viscosity of liquid fuels, higher will be its heating value

An indication of sensible heat content in air-water vapour mixture is a) wet bulb temperature b) dew point temperature c) density of air d) dry bulb temperature

Description : An indication of sensible heat content in air-water vapour mixture is a) wet bulb temperature b) dew point temperature c) density of air d) dry bulb temperature

Last Answer : d) dry bulb temperature

To maximize the combustion efficiency, which of the following in the flue gas needs to be done? a) maximize O2 b) maximize CO2 c) minimize CO2 d) maximize CO

Description : To maximize the combustion efficiency, which of the following in the flue gas needs to be done? a) maximize O2 b) maximize CO2 c) minimize CO2 d) maximize CO

Last Answer : b) maximize CO2

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Last Answer : kW/Ton of Refrigeration

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Last Answer : kW/Ton of Refrigeration

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant for the month Paper 1 –Set A with Solutions _______________________ Bureau of Energy Efficiency 6 is ------- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Last Answer : d) 60,000 kWh

One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Description : One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Last Answer : (C) 50 kJ/sec

The cost of replacement of inefficient chiller with an energy efficient chiller in a plant was Rs. 10 lakh .The net annual cash flow is Rs 2.50 lakh .The return on investment is: a) 18% b) 20% c) 15 % d) none of the above

Description : The cost of replacement of inefficient chiller with an energy efficient chiller in a plant was Rs. 10 lakh .The net annual cash flow is Rs 2.50 lakh .The return on investment is: a) 18% b) 20% c) 15 % d) none of the above

Last Answer : d) none of the above

The quantity of heat required to raise the temperature of a given substance by 1 oC is known as: a) sensible heat b) specific heat c) heat capacity d) latent heat

Description : The quantity of heat required to raise the temperature of a given substance by 1 oC is known as: a) sensible heat b) specific heat c) heat capacity d) latent heat

Last Answer : specific heat specific heat is the quantity of heat required to raise the temperature of 1 gram substance by 1 oC is

A building intended to be used for commercial purpose will be required to follow Energy conservation building code under Energy Conservation Act, 2001 provided its a) connected load is 120 kW and above b) contract demand is 100 kVA and above c) connected load is100 kW and above or contract demand is 120 kVA and above

Description : A building intended to be used for commercial purpose will be required to follow Energy conservation building code under Energy Conservation Act, 2001 provided its a) connected load is 120 kW and above b) ... and above c) connected load is100 kW and above or contract demand is 120 kVA and above

Last Answer : c) connected load is100 kW and above or contract demand is 120 kVA and above

The rate of energy transfer from a higher temperature to a lower temperature is measured in a) kcal b) Watt c) Watts per second d) none of the above.

Description : The rate of energy transfer from a higher temperature to a lower temperature is measured in a) kcal b) Watt c) Watts per second d) none of the above.

Last Answer : b) Watt

A three phase induction motor is drawing 16 Ampere at 440 Volts. If the operating power factor of the motor is 0.90 and the motor efficiency is 92%, then the mechanical shaft power output of the motor is a) 12.04 kW b) 10.09 kW c) 10.97 kW d) None of the above

Description : A three phase induction motor is drawing 16 Ampere at 440 Volts. If the operating power factor of the motor is 0.90 and the motor efficiency is 92%, then the mechanical shaft power output of the motor is a) 12.04 kW b) 10.09 kW c) 10.97 kW d) None of the above

Last Answer : b) 10.09 kW

An electric heater draws 5 kW of power for continuous hot water generation in an industry. How much quantity of water in litres per min can be heated from 30oC to 85oC ignoring losses?. a) 1.3 b) 78.18 c) 275 d) none of the above

Description : An electric heater draws 5 kW of power for continuous hot water generation in an industry. How much quantity of water in litres per min can be heated from 30oC to 85oC ignoring losses?. a) 1.3 b) 78.18 c) 275 d) none of the above

Last Answer : a) 1.3

The electrical power unit Giga Watt (GW) may be written as a) 1,000,000 MW b) 1,000 MW c) 1,000 kW d) 1,000,000 W

Description : The electrical power unit Giga Watt (GW) may be written as a) 1,000,000 MW b) 1,000 MW c) 1,000 kW d) 1,000,000 W

Last Answer : b) 1,000 MW

The power generation potential in mini hydro power plant for a water flow of 3 m3 /sec with a head of 14 meters and with a system efficiency of 55% is a) 226.6 kW b) 76.4 kW c) 23.1 kW d) none of the above

Description : The power generation potential in mini hydro power plant for a water flow of 3 m3 /sec with a head of 14 meters and with a system efficiency of 55% is a) 226.6 kW b) 76.4 kW c) 23.1 kW d) none of the above

Last Answer : a) 226.6 kW

Which of the following statements are true? i) reactive current is necessary to build up the flux for the magnetic field of inductive devices ii) some portion of reactive current is converted into work iii) the cosine of angle between kVA and kVAr vector is called power factor iv) the cosine of angle between kW and kVA vector is called power factor a) i & iv b) ii & iii c) i & iii d) iii & iv

Description : Which of the following statements are true? i) reactive current is necessary to build up the flux for the magnetic field of inductive devices ii) some portion of reactive current is converted into work iii) the cosine of angle ... called power factor a) i & iv b) ii & iii c) i & iii d) iii & iv

Last Answer : a) i & iv

The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton

Description : The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton

Last Answer : (B) kWh/ton

As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Description : As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Last Answer : kwh

95. As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Description : 95. As per pie chart on energy consumption the supply unit of the electricity is……….. a. kWh c. kV b. kg. d. Watts

Last Answer : kwh

The energy consumption and production patterns in a chemical plant over a 9 month period is provided in the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 297 381 479 585 440 234 239 239 Energy Consumption MWh /month 78.2 75.7 76.3 76.1 78.1 70.7 73.7 64.4 72.1 Estimate the cumulative energy savings at end of the 9th month and give your inference on the result ? ( consider 9 month data for evaluation for predicted energy consumption)

Description : The energy consumption and production patterns in a chemical plant over a 9 month period is provided in  the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 ... and give your inference on the  result ? ( consider 9 month data for evaluation for predicted energy consumption)

Last Answer : It is required to use the equations Y= mX + C and  nC + mΣX = ΣY  cΣX + mΣX2 = ΣXY Month X =  Production in  Tonnes /  month Y =Energy  Consumption MWh  /month  X 2 XY 1 493 78.2 ... 73.7 54756 17240.63 8 239 64.4 57121 15402.96 9 239 72.1 57121 17228.98 3387 665.3 1410683 253221

PEP = (RYEE – current year energy)/RYEE = (23011 – 23834)/23011 = (-) 0.0369 ie (-) 3.7 % …………………….1.5 marks Since the PEP is negative, it implies that the energy conservation measure did not yield reduction in energy consumption, action to be taken to improve the plant performance.

Description : A manufacturing industry plans to improve its energy performance under PAT through  implementation of an energy conservation scheme. After implementation, calculate the  Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T,   Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF   = 27,200 x 0.846= 23011MWh

A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the reference year. What is your inference? Given that:  The current year (2016-17 ) Annual Production – 28,750 T ,  Current year (2016-17 ) Annual Energy Consumption– 23,834 MWh,  Reference year (2015-16 ) production - 34,000 T,  Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Description : A manufacturing industry plans to improve its energy performance under PAT through  implementation of an energy conservation scheme. After implementation, calculate the  Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T,   Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF   = 27,200 x 0.846= 23011MWh

An oil fired boiler is retrofitted to fire coconut shell chips. Boiler thermal efficiency drops from 82% to 70%. What will be the percentage change in energy consumption to generate the same output a) 12% increase b) 14.6% increase c) 17.1% decrease d) 17.1% increase

Description : An oil fired boiler is retrofitted to fire coconut shell chips. Boiler thermal efficiency drops from 82% to 70%. What will be the percentage change in energy consumption to generate the same output a) 12% increase b) 14.6% increase c) 17.1% decrease d) 17.1% increase

Last Answer : d) 17.1% increase

is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM

Description : is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM

Last Answer : a) linear regression analysis

Which of the following criteria is a responsibility of DesignatedConsumer? a) designate or appoint an accredited Energy Auditor b) adhere to stipulated energy consumption norms and standards as notified c) submit the status of energy consumption information every three years d) conduct energy audit through a certified energy auditor periodically

Description : Which of the following criteria is a responsibility of DesignatedConsumer? a) designate or appoint an accredited Energy Auditor b) adhere to stipulated energy consumption norms and standards ... information every three years d) conduct energy audit through a certified energy auditor periodically

Last Answer : b) adhere to stipulated energy consumption norms and standards as notified

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

Which of the following is false? a) electricity is high-grade energy b) high grade forms of energy are highly ordered and compact c) low grade energy is better used for applications like melting of metals rather than heating water for bath

Description : Which of the following is false? a) electricity is high-grade energy b) high grade forms of energy are highly ordered and compact c) low grade energy is better used for applications like melting of metals rather than heating water for bath

Last Answer : c) low grade energy is better used for applications like melting of metals rather than heating water for bath

COP of a refrigerator drawing 1 kW of power per ton of refrigeration is about (A) 0.5 (B) 3.5 (C) 4.5 (D) 8.5

Description : COP of a refrigerator drawing 1 kW of power per ton of refrigeration is about (A) 0.5 (B) 3.5 (C) 4.5 (D) 8.5

Last Answer : (B) 3.5

Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, work required decreases as the temperature of the refrigerator and the temperature at which heat is rejected increases (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Description : Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, ... (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Last Answer : (A) A refrigeration cycle violates the second law of thermodynamics

One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Description : One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Last Answer : (C) 200 BTU/minute

Bio-gas generated through anaerobic process mainly consists of a) only methane b) methane and ca

Description : Bio-gas generated through anaerobic process mainly consists of a) only methane b) methane and ca

Last Answer : b) methane and carbon dioxide

. Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Description : Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Last Answer : (C) 1400

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge stream is mixed with superheated steam at 400 0C, 1 atm and specific volume of 3.11 m 3 /kg. Calculate the amount of superheated steam at 300 0C produced and the volumetric flow rate of the 400 0C steam.

Description : Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C  and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge ... amount of superheated steam at 300 0C produced and the volumetric flow rate of the  400 0C steam.

Last Answer : Solution 1. Mass balance of water 1200 + m1 = m2 ………………………………………… (1) …………………….1 mark 2. Energy balance (1200 kg/h)(2676 kJ/kg) + m1(3278 kJ/kg)

The number of moles of water contained in 36 kg of water is ------------ a) 2 b) 3 c) 4 d) 5

Description : The number of moles of water contained in 36 kg of water is ------------ a) 2 b) 3 c) 4 d) 5

Last Answer : a) 2

2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Description : 2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Last Answer : c) 5.97

1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Description : 1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Last Answer : b)200 g

One ton of refrigeration is equal to the refrigeration effect corresponding to melting of 1000 kg of ice (a) in 1 hour (b) in 1 minute (c) in 24 hours (d) in 12 hours

Description : One ton of refrigeration is equal to the refrigeration effect corresponding to melting of 1000 kg of ice (a) in 1 hour (b) in 1 minute (c) in 24 hours (d) in 12 hours

Last Answer : Ans: c

As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Description : As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Last Answer : kg

99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Description : 99. As per chart on energy consumption the supply unit of furnace oil is ……… a. kWh c. kV b. kg. d. Watts

Last Answer : kg.

Which of the following is not the unit of power? (A) kW (kilowatt) (B) hp (horse power) (C) kcal/sec (D) kcal/kg sec

Description : Which of the following is not the unit of power?  (A) kW (kilowatt)  (B) hp (horse power)  (C) kcal/sec  (D) kcal/kg sec 

Last Answer : (D) kcal/kg sec 

Answer the following S. No Statement Chose the correct answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the blanks 3 Non Contact Infrared Thermometer cannot measure temperature of objects placed in hazardous places True/False 4 To measure the RPM of a Flywheel, ______ type of RPM meter is used and for a visible shaft-end _______ type of RPM meter is used. Fill in the blanks 5 In a switch yard, _____ instrument is used to identify the loose joints and terminations Fill in the blanks 6 Every Designated Consumer shall have its first energy audit conducted by ________ Energy Auditor within ______ months of

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False

List down any five Designated Consumers notified under the Energy Conservation Act.

Description : List down any five Designated Consumers notified under the Energy Conservation Act.

Last Answer : (1) Aluminium, (2) Cement, (3) Chloralkali, (4) Fertiliser, (5) Steel, (6) Pulp & Paper,  (7)Thermal Power Plants, (8) Textile, (9) Railways.

The energy conversion efficiency of a solar cell does not depend on a) solar energy insolation b) inverter c) area of the solar cell d) maximum power output

Description : The energy conversion efficiency of a solar cell does not depend on a) solar energy insolation b) inverter c) area of the solar cell d) maximum power output

Last Answer : b) inverter

Which of the following parameters is not considered for external Bench Marking? a) scale of operation b) energy pricing c) raw materials and product quality d) vintage of technology

Description : Which of the following parameters is not considered for external Bench Marking? a) scale of operation b) energy pricing c) raw materials and product quality d) vintage of technology

Last Answer : b) energy pricing