Description : Answer the following S. No Statement Chose the correct answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM meter is used and for a visible shaft-end _______ type of RPM meter is used.
Last Answer : Sr No Statement Chose the correct answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and SO2 True/False False 2 Ultrasonic Flow Meter uses the principle of____& ____ ... ] 10 In a gasification system the reduction zone is above the combustion zone True/False False
Description : India stands in the first position, in the production of coal in the world. a) True b) False
Last Answer : false
Description : 1. Where is the intensity of the earth's gravitational field maximum? 2. When is United Nations Day for Women Rights and International Peace observed? 3. Rupee was devalued by what percent in July 1991? ... basket of the world ? 20. Who united all the Sikhs and founded a kingdom in the Punjab?
Last Answer : Answer : 1. At the pole 2. March 8 3. 20 Percent 4. Fourth 5. Dantidurga 5. 5th June 7. The State Legislature 8. Calcination 9. Galileo 10. The Ruler of Gwalior 11. September 28 12. ... Fazl 16. Union List 17. Violet light 18. Reserve Bank of India 19. Temperate grassland 20. Maharaja Ranjit Singh
Description : A piece of wetted wood just floats in water. When placed in an oil of specific gravity 0.75, it will a.Float with upside down b.Sink c.Float for sometime and then sink d.Float with 3/4 of volume above the liquid surface e.Float with 1/4 of volume above the liquid level
Last Answer : b. Sink
Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m
Last Answer : c. 0.8 m
Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.
Last Answer : b.FALSE
Description : 69. Level of production may have an effect on specific energy consumption. State a) True b) False
Last Answer : true
Description : All the commercial liquid fuels are derived from natural petroleum (or crude oil). A.True B. False
Last Answer : Answer: A
Description : What is India’s place in the world in terms of fish production a. First b. Fourth c. Third d. Second
Last Answer : d. Second
Description : Express Parcel Post is all about value for money. It costs just INR 25 within the city for 2 kg parcels and INR 40 for towns within 500 km. Above statement is a) True b) False
Last Answer : a) True
Description : India is the largest producer of tractors in the world. A) True B) False
Description : An energy policy does not include a) Target energy consumption reduction b) Time period for reduction c) Declaration of top management commitment d) Future production projection
Last Answer : Future production projection
Description : An energy policy does not include …… a) Target Energy Consumption Reduction b) Time Period for Reduction c) Declaration of top Management Commitment d) Future Production Projection
Last Answer : Future Production Projection
Description : Five of the world's top fourteen oil producing countries are located in a) Middle East b) USA c) Canada d) Russia
Last Answer : Canada
Description : A stone is thrown up from the foot of tower 50 m high with a velocity of 25 m/sec and at the same time another stone is dropped from the top of tower, the two stones will cross each other after a.3 sec b.5 sec c.4 sec d.4.5 sec e.2 sec
Last Answer : e. 2 sec
Description : A wealthy wise old woman feared that her daughter was lazy and as a result rather stupid. When the old woman died, her will stipulated that her assets were to be liquidated and a check was to be ... only one envelope had a true statement and that the other two statements were false. The en -Riddles
Last Answer : The daughter should pick envelope 1. Unfortunately she picked envelope 3. Statements 1 and 2 were false, and the only true statement was statement 3. If the check was in envelope 1, that would make statement 1 ... both be true. If the check was in envelope 3, statements 1 and 3 would both be true.
Description : The entire process of a project may be considered to be made upon a number of sub- processes placed in different stages called the Work Breakdown Structure. (True/False)
Last Answer : Ans. True
Description : The field intensity of a charge defines the impact of the charge on a test charge placed at a distance. It is maximum at d = 0cm and minimises as d increases. State True/False a) True b) False
Description : 17. When a body is placed over a liquid, it is subjected to gravitational force and upthrust of the liquid. A) True B) False
Last Answer : A
Description : The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.
Last Answer : a.TRUE
Description : 79 State true or false. Nordic countries consumption of energy per capita is among the highest in the world. a) True b) False
Description : Which of the following statements are true with respect to iron ore? 2. Limestone and coal are important for smelting iron ore 3. More than 20% of the world iron ore deposits are in India 4. Odisha and Jharkhand top in the ... a) I, II and III (b) II and III (c) III and IV (d) II, III and IV
Last Answer : Ans: (a)
Description : A harvest sown and reaped on the same day In an unplowed field, Which increases without growing, Remains whole though it is eaten Within and without, Is useless and yet The staple of nations. What is it? -Riddles
Last Answer : War.
Description : Which one of the following statements regarding the Human Rights Council is not correct? (1) It is an inter-governmental body within the United Nations system made up of all members of the UN (2) It is ... : (4) It is made up of 47 UN Member States which are elected by the UN General Assembly.
Last Answer : (1) It is an intergovernmental body within the United Nations system made up of all members of the UN Explanation: The United Nations Human Rights Council (UNHRC) is a United Nations body whose mission ... seat is three years, and no member may occupy a seat for more than two consecutive terms.
Description : Which compost plant became first in India to receive carbon credits worth 25 lakh rupees from the United Nations Framework Convention on Climate Change? a) Okhla Compost Plant b) ROTOPALA Composting Plant c) Mumbai Compost Plant d) Kanpur Composting Plant
Last Answer : Answer: (a) Okhla Compost Plant
Last Answer : 1984 Of the year 16 September Bangladesh Of the United Nations Terms Profit By
Description : The gains from two nations depend on A. Domestic barter rates B. Different in the domestic barter rates of the two countries C. Terms of trade D. Degree of absolute advantage.
Last Answer : Terms of trade
Description : The weight of an object will be maximum when it is placed at a.North pole b.South pole c.Equator d.Centre of earth e.Any of the above loctions
Last Answer : d. Centre of earth
Description : The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above
Last Answer : d. Angle of repose
Description : A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above
Last Answer : a. About 16?
Description : It is the process of placing seeds in holes made in the seedbed and closing the seed with soil. In this method, seeds are placed in holes made at definite depth at fixed spacing. b. Drilling c. Broadcasting d. None of the above.
Last Answer : Ans - a. Dibbing
Description : In single action harrow two gangs placed end to end, which through the soil in directions. b. Same c. Diagonal d. None of the above
Last Answer : Ans - a. Opposite
Description : is a device to refill a furrow after seed has been placed in it. a) Seed box b) Covering device c) Transport wheel d) Seed drill
Last Answer : Covering device
Description : Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm
Last Answer : 20-30cm
Description : Knife clips are placed with wearing plates spaced to apart a) 20 to 30 b) 45 to 60 c) 20 to 35 d) 30 to 40
Last Answer : 20 to 30
Description : harrow consist of two gangs placed end to end. A) Single action disc harrow B) Double action disc harrow C) Triple action disc harrow D) None above
Last Answer : Single action disc harrow
Description : Two masses, one of the 10kg and the other unknown, are placed on a scale in a region where g = 9.67 m/sec2 . The combined weight of these two masses is 174.06 N. Find the unknown mass in kg. a. 20 kg b. 19 kg c. 18 kg d. 17 kg formula: m=Fg k / g
Last Answer : 18 kg
Description : Two 12 ft. sections of aluminum siding are placed end to end on the outside wall of house. How large a gap should be left between the pieces to prevent buckling if the temperature can change by 55˚C? a. 0.21 m b. 0.18 m c. 0.31 in d. 0.18 in
Last Answer : 0.18 in
Description : The technology is defined as the sophistication of a plant ,any equipment or any machine etc a.TRUE b.FALSE c.D d.
Description : Cellular manufacturing is not a application of thought of group technology. a.TRUE b.FALSE c.D d.
Description : The technology is defined as the sophistication of a plant ,any equipment or anymachine etc a.TRUE b.FALSE c. d.
Description : The time duration of useful life of any product is known as a product's life cycle. a.TRUE b.FALSE c. d.
Description : The technology life cycle concerned with the time and cost of developing the technology a.TRUE b.FALSE c. d.
Description : Explicit support structures are not required in Selective Laser Sintering (SLS). a.TRUE b.FALSE c. d.
Description : In Selective Laser Sintering, laser light is also being used. a.TRUE b.FALSE c. d.
Description : Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.
Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.
Description : For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.
Description : For Q 45, Lines are perpendicular? a.TRUE b.FALSE c.D d.
Description : Co-ordinates are ranging according to the screen resolution. a.TRUE b.FALSE c. d.