Knife clips are placed with wearing plates spaced to apart a) 20 to 30 b) 45 to 60 c) 20 to 35 d) 30 to 40

Knife clips are placed with wearing plates spaced to apart a) 20 to 30 b) 45 to 60 c) 20 to 35 d) 30 to 40
by

1 Answer

Answer :

20 to 30
by

Related questions

Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm

Description : Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm

Last Answer :  20-30cm

is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Description : is an assembly comparing of fingers, knife guides on wearing plates and shoe. a) Cutter bar b) Knife section c) Pitman d) Shoe

Last Answer : Cutter bar

How many HP for tractor is suitable suitable for 20 hectares farm? A. 10-15 C. 20-25. B. 30-35 D. 40-45

Description : How many HP for tractor is suitable suitable for 20 hectares farm? A. 10-15 C. 20-25. B. 30-35 D. 40-45

Last Answer : 20-25

P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each one of them finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60

Description : P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each ... finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60 

Last Answer : B Time taken by (P + Q) to finish the job = 24days. (P + Q)'s 1 day's job = 1/24 Time taken by (Q +R) to finish the job = 30days. (Q + R)'s 1 day's job = 1/30 Time taken by (R + P) to finish the ... - {(P + Q)'s 1 day's job } = (1/20 -1/24)=1/120 Hence, R alone can finish the job in 120 days.

Sluice valves in main water supplies (A) Are used to regulate the flow of water in pipes (B) Are spaced about 5 km apart (C) Are usually placed at the summits (D) All the above

Description : Sluice valves in main water supplies  (A) Are used to regulate the flow of water in pipes  (B) Are spaced about 5 km apart  (C) Are usually placed at the summits  (D) All the above 

Last Answer : (D) All the above 

A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above

Description : A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above

Last Answer : a. About 16?

Find the force of interaction between 60 stat coulomb and 37.5 stat coulomb spaced 7.5cm apart in transformer oil(εr=2.2) in 10 -4 N, a) 8.15 b) 5.18 c) 1.518 d) 1.815

Description : Find the force of interaction between 60 stat coulomb and 37.5 stat coulomb spaced 7.5cm apart in transformer oil(εr=2.2) in 10 -4 N, a) 8.15 b) 5.18 c) 1.518 d) 1.815

Last Answer : d) 1.815

A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Description : A tractor with fewer wheels Base, higher ground clearance may work successful in which soil A. B. 30-35 D. 40-45 Heavier C. Black cotton soil B. Wet soil D. Lighter soil

Last Answer : Lighter soil

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Description : The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Last Answer : Answer: Option C

The average age of the whole class is 12.05 years. The average age of all girls is 12.5 years and the average age of boys is 11.75 years. If the total number of boys is 45 then what is the total number of girls in the class? a) 20 b) 25 c) 30 d) 35 e) 40

Description : The average age of the whole class is 12.05 years. The average age of all girls is 12.5 years and the average age of boys is 11.75 years. If the total number of boys is 45 then what is the total number of girls in the class? a) 20 b) 25 c) 30 d) 35 e) 40

Last Answer : Let the number of girls be x. The number of boys is 45. :. Total age of boys and girls in the class = (x+45) × 12.05 or, (x+45) × 12.05 = 45 × 11.75 + x × 12.5 or, 12.05x + 542.25 = 528.75 + 12.5x or, 13.5 = 0.45x or, x = 13.5/0.45 = 30 Answer is: c)

Where the intensity of dust is not severe generally pre- cleaners a placed above the tractor hood about a) 35 cm b) 40 cm c) 45 cm d) 50 cm

Description : Where the intensity of dust is not severe generally pre- cleaners a placed above the tractor hood about a) 35 cm b) 40 cm c) 45 cm d) 50 cm

Last Answer : a) 35 cm

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Description : The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Last Answer : (B) 30 to 35

The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Description : The penetration of powered machines in various farm activities is assede in the range of .. to .. a. 40,30. c) 20,40 b. 50,10. d) 40,45

Last Answer : 40,45

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

The weight of the puddler is . A 10-20 kg C 20-30 kg B 30-40 kg D 45-55 kg

Description : The weight of the puddler is . A 10-20 kg C 20-30 kg B 30-40 kg D 45-55 kg

Last Answer : 30-40 kg

Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

A taxi driver make a trip from the plains to ooty which are 340km apart at an average speed of 60km/hr. In the return trip, he covers the speed distance at an average of 30 km/hr. the average speed of the taxi over the entire distance of 680 km is a) 30 b) 40 c) 50 d) 60

Description : A taxi driver make a trip from the plains to ooty which are 340km apart at an average speed of 60km/hr. In the return trip, he covers the speed distance at an average of 30 km/hr. the average speed of the taxi over the entire distance of 680 km is a) 30 b) 40 c) 50 d) 60 

Last Answer : B Average speed =(2xy/( x+y)) km/hr Given x =60 km/hr y = 30km/hr Average speed = (2*60*30/ (60+30)) km/hr =(3600/ 90) =40 km/hr

The width of seed drill with 9 tynes, each spaced at 20 cm is a) 160 cm b) 180 cm c) 200 cm d) 220 cm

Description : The width of seed drill with 9 tynes, each spaced at 20 cm is a) 160 cm b) 180 cm c) 200 cm d) 220 cm

Last Answer : ans b

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

Aronia, Black Chokeberry used as a foundation planting should be spaced How far apart?

Description : Aronia, Black Chokeberry used as a foundation planting should be spaced How far apart?

Last Answer : I have a rock border around the house which I plant in front of NOT at the foundation. I planted the Aronia probably 6 ft from the house and 3.5 ft between the plants in a double row.

What is the impedance of a balance 4-wire with a diameter of 0.25 cm and spaced 2.5 cm apart using an insulator with a dielectric constant of 2.56? A. 100Ω B. 65Ω C. 75 Ω D. 50 Ω

Description : What is the impedance of a balance 4-wire with a diameter of 0.25 cm and spaced 2.5 cm apart using an insulator with a dielectric constant of 2.56? A. 100Ω B. 65Ω C. 75 Ω D. 50 Ω

Last Answer : A. 100Ω

When the two coil sides forming a coil are spaced exactly one pole pitch apart they are said to be of (a) short pitch (b) full pitch (c) either of the above (d) none of the above

Description : When the two coil sides forming a coil are spaced exactly one pole pitch apart they are said to be of (a) short pitch (b) full pitch (c) either of the above (d) none of the above

Last Answer : (b) full pitch

Which of the following procedures would be best from the stand point of efficiency of acquisition for a given degree of long-term retention? Options: A) A high level of over-learning B) Reviews spaced progressively further apart C) Trial and Error D) Cramming

Description : Which of the following procedures would be best from the stand point of efficiency of acquisition for a given degree of long-term retention? Options: A) A high level of over-learning B) Reviews spaced progressively further apart C) Trial and Error D) Cramming

Last Answer : B) Reviews spaced progressively further apart 

An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Description : An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Last Answer : e. 60

BMR of healthy adult men is about (A) 30 kcal/hour/square metre (B) 35 kcal/hour/square metre (C) 40 kcal/hour/square metre (D) 45 kcal/hour/square metre

Description : BMR of healthy adult men is about (A) 30 kcal/hour/square metre (B) 35 kcal/hour/square metre (C) 40 kcal/hour/square metre (D) 45 kcal/hour/square metre

Last Answer : Answer : C

Menopause usually occurs between (a) 30 and 35 years (b) 35 and 40 years (c) 40 and 45 years (d) 45 and 50 years

Description : Menopause usually occurs between (a) 30 and 35 years (b) 35 and 40 years (c) 40 and 45 years (d) 45 and 50 years

Last Answer : Ans:(d)

How many remittances can be received by a single individual beneficiary under the scheme during a year? A. 40 B. 45 C. 40 D. 35 E. 30

Description : How many remittances can be received by a single individual beneficiary under the scheme during a year? A. 40 B. 45 C. 40 D. 35 E. 30

Last Answer : E. 30 Explanation: Thirty remittances can be received by a single individual beneficiary under the scheme during a calendar year.

A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Description : A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Last Answer : ANS: D

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

Depth of borings for soil investigation, is generally kept below low water level (A) 30 m (B) 35 m (C) 45 m (D) 40 m

Description : Depth of borings for soil investigation, is generally kept below low water level (A) 30 m (B) 35 m (C) 45 m (D) 40 m

Last Answer : (C) 45 m

Torch is kept at height from top surface of rail head? (i) 30 to 55 mm (ii) 35 to 40 mm (iii) 40 to 45 mm

Description : Torch is kept at height from top surface of rail head? (i) 30 to 55 mm (ii) 35 to 40 mm (iii) 40 to 45 mm

Last Answer : (iii) 40 to 45 mm

The marks obtained by 15 students in an examination are given below : 40, 20, 24, 19,20, 35, 12, 48, 29, 40, 45, 48, 42, 23, 35. Find the average mark

Description : The marks obtained by 15 students in an examination are given below : 40, 20, 24, 19,20, 35, 12, 48, 29, 40, 45, 48, 42, 23, 35. Find the average mark

Last Answer : The marks obtained by 15 students in an examination are given below : 40, 20, 24, 19,20, 35, 12, ... , 23, 35. Find the average mark of the students.

The mean of 20, 40, 35, 42, and 45 is ____.

Description : The mean of 20, 40, 35, 42, and 45 is ____.

Last Answer : The mean of 20, 40, 35, 42, and 45 is ____.

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

Mechanical and Electrical sources increased from - A) 40 to 83 % C) 30 to 93 % B) 35 to 87 % D) None of the above

Description : Mechanical and Electrical sources increased from - A) 40 to 83 % C) 30 to 93 % B) 35 to 87 % D) None of the above

Last Answer : 40 to 83 %

A Bingham fluid of viscosity μ = 10 Pa.s and yield stress, τ0 = 10 KPa, is shared between flat parallel plates separated by a distance of 10 -3 m. The top plate is moving with a velocity of 1 m/s. The shear stress on the plate is (A) 10 KPa (B) 20 KPa (C) 30 KPa (D) 40 KPa

Description : A Bingham fluid of viscosity μ = 10 Pa.s and yield stress, τ0 = 10 KPa, is shared between flat parallel plates separated by a distance of 10 -3 m. The top plate is moving with a velocity of 1 m/s. The shear stress on the plate is (A) 10 KPa (B) 20 KPa (C) 30 KPa (D) 40 KPa

Last Answer : (B) 20 KPa

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

A train moving at 60 kilometers per hour is struck by a bullet moving 1000 m/sec at right angles to the train. The direction with which the bullet appears to strike the train would be a.75? b.60? c.22 d.30? e.45?

Description : A train moving at 60 kilometers per hour is struck by a bullet moving 1000 m/sec at right angles to the train. The direction with which the bullet appears to strike the train would be a.75? b.60? c.22 d.30? e.45?

Last Answer : e. 45?

A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Description : A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Last Answer : e. Either of (A) and (C)

Sum of present ages of A and B is 60 years. 5 years hence, their ages will be in the ratio 3:4. Find A’s present age. a) 25 years b) 30 years c) 35 years d) 40 years e) None of these

Description : Sum of present ages of A and B is 60 years. 5 years hence, their ages will be in the ratio 3:4. Find A’s present age. a) 25 years b) 30 years c) 35 years d) 40 years e) None of these

Last Answer : Sum of their present ages = 60 years sum of their ages, 5 years hence = 60 + (5 × 2) = 70 years. after 5 years, ratio of ages of A and B will be 3 : 4. A’s age after 5 years = (3/7) × 70 = 30 years A’s present age = 30 – 5 = 25 years Answer: a)

The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Description : The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Last Answer : a. 30?

A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

What would be the total power consumed in the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 10 watts B. 40 watts C. 45 watts D. 60 watts

Description : What would be the total power consumed in the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 10 watts B. 40 watts C. 45 watts D. 60 watts

Last Answer : Answer: D

Where the complaint alleges a defect in the goods which cannot be determined without proper analysis or test of the goods, the sample of goods forwarded to appropriate laboratory for laboratory test. Such types of case finding report within ______days a) 30 b) 40 c) 45 d) 60

Description : Where the complaint alleges a defect in the goods which cannot be determined  without proper analysis or test of the goods, the sample of goods forwarded to  appropriate laboratory for laboratory test. Such types of case finding report within  ______days a) 30 b) 40 c) 45 d) 60

Last Answer : c) 45 

Can I edit iTunes music files into short 20-30 second clips?

Description : Can I edit iTunes music files into short 20-30 second clips?

Last Answer : Import into GarageBand or in iTunes select “get info” with the track selected and then choose the tab that allows you to set the start and end time of the track.

Daily output of urea in grams is (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 35 to 45

Description : Daily output of urea in grams is (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 35 to 45

Last Answer : Answer : C