While Doing Welding What Are The Safety Measures That Worker Should Follow?

While Doing Welding What Are The Safety Measures That Worker Should Follow?
by

1 Answer

Answer :

While doing welding, workers should follow the rules like:
Respirator or welders mask: Use mask or respirators as per your projects, match the filter to the types of metals and coatings used

Ventilation: Welding area should have proper ventilation; improper ventilation can cause “plume poisoning.”
Clean and tidy area: Make sure the area you working is clean and check for any leaks

Storage: Flammable substance should be kept in a proper storage locker

Eye protection: Eye protection can protect against injuries due to debris and the effects of the ultraviolet light

Fire protection: The sparks from welding can set fire, proper fire extinguisher should be kept in reach of the welding area

Protective clothing: Body parts like hands and legs should be a cover with protective and clothes which can bear heat and spark emitted from the welding.
by

Related questions

What are the safety measures to be taken while doing Radiography?

Description : What are the safety measures to be taken while doing Radiography?

Last Answer : Ensure a competent person is surveying outside the barricaded area with survey meter. The crew is authorized and following safety precautions. The controlled area is calculated, evacuated and barricaded with Yellow/Black tapes, warning signs (a minimum 4 no’s) and Red or Yellow flash lights.

Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Description : Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Last Answer : The precaution measures taken at the working site is:  Overhead and side clearances are adequate to permit the safe operation of the lift truck  Aisles, floors and passageways should be ... of vapours from the refueling and operation of its lift trucks, workplace should be adequately ventilated.

What Care Has To Be Taken Care When Doing Gas Welding?

Description : What Care Has To Be Taken Care When Doing Gas Welding?

Last Answer : While doing gas welding worker should:  Should wear proper protective before doing gas welding  Valve protection caps should be in a secured place  When cutting is done, they should be secured ... away from oil or grease  Any faulty or defective equipment should be reported to the supervisor.

Welding requires a. Non-skilled worker b. Skilled worker c. Any worker

Description : Welding requires a. Non-skilled worker b. Skilled worker c. Any worker

Last Answer : b. Skilled worker

What are the personal safety measures one has to take , while operating pressure washers?

Description : What are the personal safety measures one has to take , while operating pressure washers?

Last Answer : Wear goggles, do not point the sprayer at people including yourself, and always make sure the water is not too hot.

What effect did a lack of guarantees of worker safety have on the economy?

Description : What effect did a lack of guarantees of worker safety have on the economy?

Last Answer : Feel Free to Answer

What type of safety protection do you need for standard welding equipment?

Description : What type of safety protection do you need for standard welding equipment?

Last Answer : "While using welding equipment, you should always wear safety googles and protective gloves." Make sure you have on a welding jacket and long pants when you're using welding equipment. Those sparks can be very dangerous.

Who is responsible for site safety? a) Site Quality Engineer b) Welding Supervisor c) An approved safety engineer d) Everyone

Description : Who is responsible for site safety? a) Site Quality Engineer b) Welding Supervisor c) An approved safety engineer d) Everyone

Last Answer : d) Everyone

Mention What Are The Tools Used By Road Maintenance Worker?

Description : Mention What Are The Tools Used By Road Maintenance Worker?

Last Answer : Tools used by road maintenance worker are:  Swiss hammer  Drills  Jackhammers  Road-rollers  Epoxy guns  Chain drags  Pressure washers  Sand blasters, Saws, etc.

Mention What Are The Duties Of A Construction Maintenance Worker?

Description : Mention What Are The Duties Of A Construction Maintenance Worker?

Last Answer :  Inspect the structures and identify the cause of the problem  Fix the broken parts and giving final finishing touch to repair and construct repairs  Sound knowledge of using hand and power tools ... Check prices with suppliers  Estimate costs of a job  Do almost all types of maintenance work

What Does The Carpentry Maintenance Worker Do?

Description : What Does The Carpentry Maintenance Worker Do?

Last Answer : Carpentry maintenance worker does many things like:  Assist in measuring, marking and arranging materials according to blue-print  Cuts and shapes materials such as wood, fiberglass and ... Assisting with the erection of scaffolding  Inspect wooden structure and build forms for pouring concrete

How Can One Become A General Maintenance Worker?

Description : How Can One Become A General Maintenance Worker?

Last Answer : To become general maintenance worker the individual should learn some basic skills in high school or technical classes, community college or postsecondary trade of vocational schools. Student aspire to become maintenance worker can also observe and learn maintenance skill.

What Is The Skill Required To Become Maintenance And Repair Worker?

Description : What Is The Skill Required To Become Maintenance And Repair Worker?

Last Answer : To become maintenance and repair worker you must know:  Basic calculation  Safety practices and handling tools  Basic plumbing repair skills  Basic knowledge of electrical wiring  Ability to decipher written or oral instructions  Physical agility  Able to lift and move heavy objects.

What Are The Duties Of A Maintenance And Repair Worker?

Description : What Are The Duties Of A Maintenance And Repair Worker?

Last Answer : The maintenance and repair worker duties includes:  Building partitions  Make a plaster or drywall repairs  Fix or paint roofs  Fix worn or broken parts  Maintain and repair ... parts like motors, belts, drives, fluid levels and perform other maintenance actions  Drywall repairs

How do companies keep track of what their one of a kind, highly skilled worker is doing?

Description : How do companies keep track of what their one of a kind, highly skilled worker is doing?

Last Answer : The outcomes they produce, together with periodic reports and discussions.

CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Description : CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Last Answer : c.welding

Do school buses have all the necessary safety measures?

Description : Do school buses have all the necessary safety measures?

Last Answer : An important part missing from safety equipment is collision avoidance systems. This technology is currently only available to high-end vehicles. Hopefully, in the next decades buses, trucks and cars will have it and the cost in lives and damages resulting from accidents will be greatly reduced.

Which of these gun safety measures passed by the Senate Judiciary committee do you support?

Description : Which of these gun safety measures passed by the Senate Judiciary committee do you support?

Last Answer : First, I feel that any time anything is voted on along straight party lines say bill should be immediately thrown in the trash without further ado and everyone should start again. In response ... more rights violations, more wasted funds, with no significantly better results than we have at present.

[SFW] What safety measures do you (have to) take to do your job (safely)?

Description : [SFW] What safety measures do you (have to) take to do your job (safely)?

Last Answer : answer:[LOVE the sfw tag, ha ha!] I have to cut my nails – for playing the harp they have to be short! (Sounds rubbish otherwise, and er, bad for the strings!)

How important is it to clean splashes on a microwave interior( and other microwave safety measures)?

Description : How important is it to clean splashes on a microwave interior( and other microwave safety measures)?

Last Answer : I let my microwave get pretty nasty. The only thing I ever got from that is alcoholism. I wouldn’t worry.

Road safety measures: Is this a good or a bad idea? (see details)

Description : Road safety measures: Is this a good or a bad idea? (see details)

Last Answer : I agree with you. I can see it causing drivers to slam on their breaks and I could also see it desensitizing drivers to children actually being in the streets. I would imagine after driving over it ... it would effect their reaction time (causing them to hit the child instead of being able to stop).

1. Name two safety measures commonly used in electric circuits and appliances. -Physics-10

Description : 1. Name two safety measures commonly used in electric circuits and appliances. -Physics-10

Last Answer : The safety measured commonly used in electric circuits are as follows: Fuse Each circuit should be connected to a fuse because a fuse prevents the flow of excessive current through the circuit. ... to the ground by earthing and the people using the appliance is prevented from getting electrocuted.

Safety Measures to find trusted lp gas suppliers?

Description : Safety Measures to find trusted lp gas suppliers?

Last Answer : Check whether the suppliers are certified. The reputation of the supplier Delivery time Feedback from their customers. Price of the gas Cylinders they have delivered to the customers.

What are safety rules for tape measures?

Description : What are safety rules for tape measures?

Last Answer : Need answer

What are the safety measures that can be taken for scaffolding?

Description : What are the safety measures that can be taken for scaffolding?

Last Answer : The utility of a scaffold cannot be denied but the hazards which are associated with scaffold are also very common. This is the reason why we need to take precautions and safety measures during ... also be used and instructions should be given to the workers so that hazards can be prevented.

ELECTRICAL ENGINEERING PRACTICE - SAFETY MEASURES

Description : ELECTRICAL ENGINEERING PRACTICE - SAFETY MEASURES

Last Answer : 1. Use approved tools, equipment's and protective devices. 2. Do not work under poor light or when you are tired. 3. Do not work in damp areas or in wet shoes or clothes. 4. Keep ... appliances away from heated surfaces and open flames. 11. Check the electric power supply from the switch position.

Give safety measures adopted in fertilizer industry.

Description : Give safety measures adopted in fertilizer industry.  

Last Answer : Education and personal hygiene PPE and safety showers Process segregation Heat insulation and careful operation handling Probably handle mechanization and automation Proper ventilation Pipe line and storage tank precaution specially ammonia storage  Catalyst handling and storage

When using social media are security measures you should follow Select all that apply.?

Description : When using social media are security measures you should follow Select all that apply.?

Last Answer : What is the answer ?

Why don't bicyclists follow the rules of the road for other people's safety?

Description : Why don't bicyclists follow the rules of the road for other people's safety?

Last Answer : I’ll get my cyclist boyfriend to answer this later.

The moment of a force a.Occurs about a point b.Measures the capacity to do useful work c.Occurs only when bodies are in motion d.Measures the ability to produce turning or twisting about an axes e.None of the above

Description : The moment of a force a.Occurs about a point b.Measures the capacity to do useful work c.Occurs only when bodies are in motion d.Measures the ability to produce turning or twisting about an axes e.None of the above

Last Answer : d. Measures the ability to produce turning or twisting about an axes

measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Description : measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Last Answer : Combustion analyzer

Implementing management measures to correct any variances, which may have occurred _____. a] Recording c] Checking b] Controlling. d] Allocating

Description : Implementing management measures to correct any variances, which may have occurred _____. a] Recording c] Checking b] Controlling. d] Allocating

Last Answer : controlling

When was the Ninth General Conference on Weights and Measures decided to abandon centigrade and used Celsius Instead?  a. 1950  b. 1936  c. 1957  d. 1948

Description : When was the Ninth General Conference on Weights and Measures decided to abandon centigrade and used Celsius Instead?  a. 1950  b. 1936  c. 1957  d. 1948

Last Answer : 1948

What device measures infrared radiation below?  a. thermocouple  b. thermopile  c. thermodynamic device  d. thermos

Description : What device measures infrared radiation below?  a. thermocouple  b. thermopile  c. thermodynamic device  d. thermos

Last Answer : thermopile

_________ is a thermodynamic potential that measures the “useful” or process-initiating work obtainable from an isothermal, isobaric thermodynamic system.  a. Du-Pont Potential  b. Gibbs free energy  c. Rabz-Eccles Energy  d. Claussius Energy

Description : _________ is a thermodynamic potential that measures the “useful” or process-initiating work obtainable from an isothermal, isobaric thermodynamic system.  a. Du-Pont Potential  b. Gibbs free energy  c. Rabz-Eccles Energy  d. Claussius Energy

Last Answer : Gibbs free energy

While mixing sand, gravel, and cement for the foundation of a house, a worker noticed a small bird hopping along the top of the foundation wall. The bird misjudged a hop and fell down one of the holes between the blocks. The bird was down too far for anyone to reach it and the hole was too small for it to fly out of. Someone suggested using two sticks to reach down into the hole and pull the bird out, but this idea was rejected for fear it would injure the fragile bird. What would be the easiest way to get the bird out of the hole without injuring it? -Riddles

Description : While mixing sand, gravel, and cement for the foundation of a house, a worker noticed a small bird hopping along the top of the foundation wall. The bird misjudged a hop and fell down one of the holes ... . What would be the easiest way to get the bird out of the hole without injuring it? -Riddles

Last Answer : Since they had plenty of sand available, they could pour a little at a time into the hole. The bird would constantly keep shifting its position so that it stood on the rising sand.

What should be done to prevent a safety valve to stick to its seat ?

Description : What should be done to prevent a safety valve to stick to its seat ?

Last Answer : Safety valve should be blown off periodically so that no corrosion can take place on valve and valve seat.

Why Does The Safety Valve On My Tank Blow Off?

Description : Why Does The Safety Valve On My Tank Blow Off?

Last Answer : This is caused by a pressure switch improperly installed, set too high or malfunctioning. Safety valves do not normally fail on their own.

Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Description : Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Last Answer : This is most commonly an indication of bad valves. Depending on the model valves could be rebuilt or replaced.

Safety, comfort and fir the operator will continue the great deal of attention. A. Inconvenience C. Difficulties B. Convenience. D. None of the above

Description : Safety, comfort and fir the operator will continue the great deal of attention. A. Inconvenience C. Difficulties B. Convenience. D. None of the above

Last Answer : Convenience

The ……….-induced response of cooling tower is the key factor to improve safety and to reduce tower crack. a) wind c) heat b) water d) steam

Description : The ……….-induced response of cooling tower is the key factor to improve safety and to reduce tower crack. a) wind c) heat b) water d) steam

Last Answer : wind

What are the safety requirements for doing a hot work?

Description : What are the safety requirements for doing a hot work? 

Last Answer : A) Remove all combustible materials from the area (with in 10m), if possible. B) Use fire blanket to protect immovable combustible materials and also for welding slugs. C) Cover the area with ... valid hot work permit I) Conduct gas test if presence of combustible gases expected prior to work.

Give procedure for doing safety audit. Explain records to be examined during safety audit.

Description : Give procedure for doing safety audit. Explain records to be examined during safety audit. 

Last Answer : Procedure of safety Auditing : Safety audit is carried out by a team whose members are not involved in the plant or activity being audited. The expertise of the team should be compatible with ... . Maintenance procedure records. 14. House keeping inspection records. 15. Record of previous audits.

Follow product has big label. A) Ceiling fan. C) Tubelight B) Computer. D) Refrigerator

Description : Follow product has big label. A) Ceiling fan. C) Tubelight B) Computer. D) Refrigerator

Last Answer : Refrigerator

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : (C) Mild steel

Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel

Last Answer : Option C

State any factors to be considered while selecting electrical welding system.

Description : State any factors to be considered while selecting electrical welding system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Description : If I Mount My Compressor Sideways, Like On The Frame Rail Of My Truck, Is There Anything I Should Be Careful Of When Doing This?

Last Answer : you mount your compressor sideways to the frame rail, you should periodically check to make sure that your compressor is mounted securely. Use a thread-locking compound to keep the screws from backing off and causing the compressor to be mounted loosely.

Addition of heat at constant pressure to a gas results in  (a) raising its temperature  (b) raising its pressure  (c) raising its volume  (d) raising its temperature and doing external work  (e) doing external work.

Description : Addition of heat at constant pressure to a gas results in  (a) raising its temperature  (b) raising its pressure  (c) raising its volume  (d) raising its temperature and doing external work  (e) doing external work.

Last Answer : Answer : d

As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Description : As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Last Answer : Following Precautionary measures are to be observe as a supervisor while constructing brick masonry: 1. Bricks should be as per the specification. The bricks should be well burnt, reddish in colour, sound and hard ... is used and for a period of about one to two weeks, if cement mortar is used.