Mention What Are The Tools Used By Road Maintenance Worker?

Mention What Are The Tools Used By Road Maintenance Worker?
by

1 Answer

Answer :

Tools used by road maintenance worker are:
 Swiss hammer
 Drills
 Jackhammers
 Road-rollers
 Epoxy guns
 Chain drags
 Pressure washers
 Sand blasters, Saws, etc.
by

Related questions

Mention What Are The Duties Of A Construction Maintenance Worker?

Description : Mention What Are The Duties Of A Construction Maintenance Worker?

Last Answer :  Inspect the structures and identify the cause of the problem  Fix the broken parts and giving final finishing touch to repair and construct repairs  Sound knowledge of using hand and power tools ... Check prices with suppliers  Estimate costs of a job  Do almost all types of maintenance work

Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Description : Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Last Answer : The precaution measures taken at the working site is:  Overhead and side clearances are adequate to permit the safe operation of the lift truck  Aisles, floors and passageways should be ... of vapours from the refueling and operation of its lift trucks, workplace should be adequately ventilated.

What Does The Carpentry Maintenance Worker Do?

Description : What Does The Carpentry Maintenance Worker Do?

Last Answer : Carpentry maintenance worker does many things like:  Assist in measuring, marking and arranging materials according to blue-print  Cuts and shapes materials such as wood, fiberglass and ... Assisting with the erection of scaffolding  Inspect wooden structure and build forms for pouring concrete

How Can One Become A General Maintenance Worker?

Description : How Can One Become A General Maintenance Worker?

Last Answer : To become general maintenance worker the individual should learn some basic skills in high school or technical classes, community college or postsecondary trade of vocational schools. Student aspire to become maintenance worker can also observe and learn maintenance skill.

What Is The Skill Required To Become Maintenance And Repair Worker?

Description : What Is The Skill Required To Become Maintenance And Repair Worker?

Last Answer : To become maintenance and repair worker you must know:  Basic calculation  Safety practices and handling tools  Basic plumbing repair skills  Basic knowledge of electrical wiring  Ability to decipher written or oral instructions  Physical agility  Able to lift and move heavy objects.

What Are The Duties Of A Maintenance And Repair Worker?

Description : What Are The Duties Of A Maintenance And Repair Worker?

Last Answer : The maintenance and repair worker duties includes:  Building partitions  Make a plaster or drywall repairs  Fix or paint roofs  Fix worn or broken parts  Maintain and repair ... parts like motors, belts, drives, fluid levels and perform other maintenance actions  Drywall repairs

Mention What Are The Challenges That Maintenance And Repair Work Usually Face?

Description : Mention What Are The Challenges That Maintenance And Repair Work Usually Face?

Last Answer :  Unusual working condition like bad weather or low temperature  May have to work in an unusual shift  May have to work in a messy area  May sometimes be physically distressing and ... have to work in dangerous places like working at height or working with electrical appliances and wires.

A Career As A Machinery Maintenance Worker Can Be A Welcome Challenge?

Description : A Career As A Machinery Maintenance Worker Can Be A Welcome Challenge?

Last Answer : Machines and equipment are called upon to perform just aboutevery type of task imaginable. From typical applications, like arefrigerator, to massive construction projects, such as bridgebuilding, ... preventative programs keeps them in the background, and manyfolks do not even realize they

How to care and maintenance of hand tools?

Description : How to care and maintenance of hand tools?

Last Answer : Ans: 1. Tools must be kept clean and free from corrosion 2. Keep metal parts lightly oiled 3. Remove burrs from edges of tools and heads of chisels. 4. Tools which are not in used must be stored separately 5. A good worker regularly inspects his tools 6. Do not use tools without handles

Describe the functions of any six tools required for rail track maintenance .

Description : Describe the functions of any six tools required for rail track maintenance .

Last Answer : 1) Cant board: It is used to check cant on curve. 2) Wire claw: It is used to clean the ballast. 3) Powarah: It is used to spread ballast. 4) Hammer: It is used to drive spikes. 5) ... used to fix bolts . 17) Spirit level along with straight edge: It is used to maintain cross levels of rails.

While Doing Welding What Are The Safety Measures That Worker Should Follow?

Description : While Doing Welding What Are The Safety Measures That Worker Should Follow?

Last Answer : While doing welding, workers should follow the rules like: Respirator or welders mask: Use mask or respirators as per your projects, match the filter to the types of metals and coatings used ... be a cover with protective and clothes which can bear heat and spark emitted from the welding.

How much would MPG ratings change in cars if they included the cost of road building and maintenance?

Description : How much would MPG ratings change in cars if they included the cost of road building and maintenance?

Last Answer : I think I see where you are going with this. We need to know the total cost per year of US road repair and road building. That would have to include bridges, of course. And we would need to know the ... you get milesroad per gallon of gasoline. If you get us those numbers we're all set .........

Tar roads get damaged if there is – (1) stagnation of water on road (2) heavy traffic (3) no maintenance (4) no sloping

Description : Tar roads get damaged if there is – (1) stagnation of water on road (2) heavy traffic (3) no maintenance (4) no sloping

Last Answer : (1) stagnation of water on road

Tar roads get damaged if there is (1) stagnation of water on road (2) heavy traffic (3) no maintenance (4) no sloping

Description : Tar roads get damaged if there is (1) stagnation of water on road (2) heavy traffic (3) no maintenance (4) no sloping 

Last Answer : stagnation of water on road

Secondary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Secondary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : c.Production operation type & sequence

Supplementary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Supplementary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : b.Manufacturing attributes

Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : a.Design attributes

What Is Reliability Centered Maintenance?

Description : What Is Reliability Centered Maintenance?

Last Answer : Reliability Centered Maintenance (RCM) was initiated by the commercial aviation industry and then adopted by the U.S. military in the 1970s and then by the U.S. commercial nuclear power industry ( ... means to maintain the functions a user may require of machinery in a defined operating context''.

What Are The Key Objectives Of Total Productive Maintenance (tpm)?

Description : What Are The Key Objectives Of Total Productive Maintenance (tpm)?

Last Answer : Some of the key objectives of TPM are:  Focus and improve people management to minimize the targeted losses.  Develop the policy, strategy and early management activities to ... safety practices and also prevent adverse environmental effects.  Reduce the wastage of organizational resources.

What Is Total Productive Maintenance?

Description : What Is Total Productive Maintenance?

Last Answer : Total Productive Maintenance (TPM) is developed from the preventive maintenance methodology introduced from the USA and further developed and implemented in many Japanese companies since 1971. It is ... using the principles of teamwork, empowerment, zero breakdowns' and zero defects'.

What Are The Maintenance Concepts And Strategies?

Description : What Are The Maintenance Concepts And Strategies?

Last Answer : Several maintenance concepts were developed in different parts of the world that are usually based on cultural and philosophical backgrounds. These trends encompass other strategies and ... below: 1. Total Productive Maintenance 2. Reliability Centered Maintenance 3. Maintenance Strategies

What Are The Controlling Activities Of Maintenance Management Include?

Description : What Are The Controlling Activities Of Maintenance Management Include?

Last Answer : Controlling activities of maintenance management include the following: 1. Work Control 2. Inventory Control 3. Cost Control 4. Quality Control. Work control is done using work order ... Control is done by the supervision and testing final outcomes following a predetermined control procedure.

What Are The Responsibility Of Maintenance Management Includes?

Description : What Are The Responsibility Of Maintenance Management Includes?

Last Answer : The organizing responsibility of maintenance management includes: 1. Job design 2. Time standards 3. Project management. Job design involves defining for each major maintenance job, the work content, the ... Method (CPM) and Program Evaluation and Review (PERT) are common project management tools.

What Is Maintenance Scheduling?

Description : What Is Maintenance Scheduling?

Last Answer : Maintenance scheduling is the process of assigning resources for tasks to be accomplished at a certain time in a certain frequency. Scheduling of tasks should take into account production schedules, optimization of resources and reducing costs.

What Is Maintenance Capacity?

Description : What Is Maintenance Capacity?

Last Answer : Capacity planning is the translation of the maintenance load into resource needed to meet the forecasted load. Resources include, number and skills of craftsmen, maintenance tools, labor, material, spare parts, etc.

What Is Maintenance Load Forecasting?

Description : What Is Maintenance Load Forecasting?

Last Answer : Maintenance forecasting is a major part of planning concerned with estimating the current and future amount of maintenance work and type needed. Maintenance load forecasting is a complex task that involves a lot of ... the age of the equipment, the rate of use, usage climate, and skills of workers.

What Is Maintenance Philosophy?

Description : What Is Maintenance Philosophy?

Last Answer : Maintenance philosophy is the step of designing on the general maintenance concept selected from known best practices as the maintenance philosophy for the organization. Total productive ... maintenance strategies such as preventive maintenance, condition based maintenance, and shutdown maintenance.

What Is Maintenance Management?

Description : What Is Maintenance Management?

Last Answer : The main decisive factor for maximizing manufacturing asset value in terms productivity, reliability, cost, etc. is maintenance management, the body of the organization that is in charge of planning, ... , the size of the organization, the complexity of its operations, and the organization culture.

What Is Maintenance In Manufacturing?

Description : What Is Maintenance In Manufacturing?

Last Answer : Maintenance in the manufacturing environment is one of the most complicated types of maintenance in comparison to construction, transportation and service business. Manufacturing is becoming highly ... usually highly structured with many several decision layers and many parallel functional areas.

What Is The Role Of Maintenance In Maintaining?

Description : What Is The Role Of Maintenance In Maintaining?

Last Answer : The role of maintenance in maintaining asset value over time is getting more visible at the business level with the increase in its acquisition and maintenance costs. various ... systems are introduced along with their distinctive features that influence maintenance strategies and practices.

What Is Maintenance And Manufacturing?

Description : What Is Maintenance And Manufacturing?

Last Answer : Maintenance is one of the major activities in manufacturing as it highly influences production quality and quantity and directly affects production cost and customer satisfaction. As new ... global communication advances, new maintenance practices are developed to cope with these changes.

What Is The Potential Risk That Repair And Maintenance Work Usually Face?

Description : What Is The Potential Risk That Repair And Maintenance Work Usually Face?

Last Answer : The potential risk that repair and maintenance worker faces are: Faulty electrical: Risk of electrocuted always remains with repair and maintenance workers, if not equipped with electric-proof tools ... Dust: It potential risk for the workers specially working in woodworking or iron industries.

CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Description : CUSUM technique provides __________ a) Deployment. b) Maintenance c) Development. d) Trend line

Last Answer : Trend line

Big label helps to calculate actual money to be spent on a) Maintenance bills c) Electricity bills b) Repairing d) None of above

Description : Big label helps to calculate actual money to be spent on a) Maintenance bills c) Electricity bills b) Repairing d) None of above

Last Answer : Electricity bills

Small labels can be found in appliances which usually a) Don‘t consume more energy c) don‘t have higher cost b) Don‘t consume less energy d) don‘t have high maintenance

Description : Small labels can be found in appliances which usually a) Don‘t consume more energy c) don‘t have higher cost b) Don‘t consume less energy d) don‘t have high maintenance

Last Answer : Don‘t consume more energy

Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Description : Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Last Answer : Because power requirement is high for forced draught

3. Mention the two techniques that were used to make stone tools. -History

Description : 3. Mention the two techniques that were used to make stone tools. -History

Last Answer : The two techniques of making stone tools were: (i) Stone on stone technique. In this technique, the pebble from which the tool was to be made was held in one hand. Another stone, which was used ... of bone or stone that was placed on the core, to remove flakes that could be shaped into tools.

Mention some tools of maintaining biodiversity records.

Description : Mention some tools of maintaining biodiversity records.

Last Answer : Mention some tools of maintaining biodiversity records.

From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Description : From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Last Answer : b.In line layout

Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Description : Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Last Answer : b.SLS

How many maximum tools can ATC hold? a.60 b.80 c.90 d.100

Description : How many maximum tools can ATC hold? a.60 b.80 c.90 d.100

Last Answer : b.80

What Are The Different Types Of Tools Used In Pipe Fittings?

Description : What Are The Different Types Of Tools Used In Pipe Fittings?

Last Answer : Generally tools used in pipe fittings are Pipe vice, Pipe wrench, Pipe die, Pipe tap, Chain wrench, Chisel, Hammer, Reamer and Pipe cutter.

Define Non Sparking Tools?

Description : Define Non Sparking Tools?

Last Answer : Non Sparking tools used in Gas, Oil and Chemicals. E.g. Brass hammer, Brass Wedge, Brass Spanner, Copper hammer, Copper rod , Brass rod , Brass chisel , Rubber hammer , Nylon hammer.

Harvesting can be done by a) Manully operated tools b) Animal drawn machines c) Mechanically operated machines d) All of the above

Description : Harvesting can be done by a) Manully operated tools b) Animal drawn machines c) Mechanically operated machines d) All of the above

Last Answer : All of the above

tillage utilizes two or more different types of tools to simplify fields a) combined b) basic c) strip d) rotary

Description : tillage utilizes two or more different types of tools to simplify fields a) combined b) basic c) strip d) rotary

Last Answer : combined

Would it be inappropriate to mention to the person conducting my road test that I have been working through an extreme phobia of driving?

Description : Would it be inappropriate to mention to the person conducting my road test that I have been working through an extreme phobia of driving?

Last Answer : answer:It's not that it would be inappropriate , it just wouldn't (and shouldn't) matter. Driving examiners are used to first-time drivers being nervous about passing. That's part of what they deal ... is a very patient and good driver - and have that person play the part of the examiner with you.

(i) Mention two demerits of road transport. (ii) Name the terminal towns of: 1. National Highway Number 1. -Geography

Description : (i) Mention two demerits of road transport. (ii) Name the terminal towns of: 1. National Highway Number 1. -Geography

Last Answer : (i) Two demerits of road transport are : 1. Roadways are not suitable for long distance travel. 2. Heavy commodities like coal and iron cannot be easily transported by roads. (ii) 1. National Highway 1 links Delhi and Amritsar. 2. National Highway 2 links Delhi and Kolkata.

Mention four demerits of road transportation with reference ot India. -SST 10th

Description : Mention four demerits of road transportation with reference ot India. -SST 10th

Last Answer : Road transportation is economical in transportation of smaller amount of goods and few passengers over short and medium distances. Though they are relatively cheap and easy to construct and maintain, road ... on the highways in not adequate, so goods and passengers are not safe all the time.

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

The slope on the road generally provided on the curves is known as a.Angle of repose b.Angle of friction c.Angle of banking d.Angle of reaction e.None of the above

Description : The slope on the road generally provided on the curves is known as a.Angle of repose b.Angle of friction c.Angle of banking d.Angle of reaction e.None of the above

Last Answer : c. Angle of banking