Describe the functions of any six tools required for rail track maintenance .

Describe the functions of any six tools required for rail track maintenance .
by

1 Answer

Answer :

1) Cant board: It is used to check cant on curve.

2) Wire claw: It is used to clean the ballast.

3) Powarah: It is used to spread ballast.

4) Hammer: It is used to drive spikes.

5) Rail bender: It is used to bend rail to keep them in desired position.

6) Jacks: It is used to lift the track.

7) Rail Gauge: It is used to check the rail gauge width.

8) Sleeper tongs: It is used to lift the sleepers.

9) Auger: It is used to drill holes.

10) Shovels: It is used to handle ballast.

11) Rail tong: It is used to lift rail.

12) Claw bar: It is used to take out spikes from sleeper.

13) Sledge hammer: It is used to cut rails by chisel.

14) Chisel: It is used to cut the rails.

15) Beater cum pickaxe: It is used to pack ballast under the sleepers.

16) Spanner: It is used to fix bolts .

17) Spirit level along with straight edge: It is used to maintain cross levels of rails.
by

Related questions

As shown in the illustration, what maintenance would be required of the circuit components? EL-0058 A. Change out both 'C' units monthly. B. Clean the glass surrounding 'E1' & 'E2' as needed. C. File the points at the upper end of 'G' every six months. D. Take megger readings on 'E1' & 'E2' windings quarterly.

Description : As shown in the illustration, what maintenance would be required of the circuit components? EL-0058 A. Change out both 'C' units monthly. B. Clean the glass surrounding 'E1' & 'E2' as needed. C. File ... upper end of 'G' every six months. D. Take megger readings on 'E1' & 'E2' windings quarterly.

Last Answer : Answer: B

The rail gauge with a track width of 1.676 m. -SST 10th

Description : The rail gauge with a track width of 1.676 m. -SST 10th

Last Answer : BROAD GAUGE: is the rail gauge with a track width of 1.676 m.

Each of the metal bars that form the track that trains run on a) coach b) railing c)rail d) bogie

Description : Each of the metal bars that form the track that trains run on a) coach b) railing c)rail d) bogie

Last Answer : c)rail

In LWR track on BG a) Level crossing should be separated by providing SEJs b) Level crossing cannot be provided in LWR. c) Level crossing should not fall within the breathing length of LWR* d) Level crossing should be laid with rail free fastenings.

Description : In LWR track on BG a) Level crossing should be separated by providing SEJs b) Level crossing cannot be provided in LWR. c) Level crossing should not fall within the breathing length of LWR* d) Level crossing should be laid with rail free fastenings.

Last Answer : c) Level crossing should not fall within the breathing length of LWR*

The horizontal clearance between guard rail and running rail in BG track is a) 25 mm b) 250 ± 50 mm* c) 75 mm d) 200 ± 50 mm

Description : The horizontal clearance between guard rail and running rail in BG track is a) 25 mm b) 250 ± 50 mm* c) 75 mm d) 200 ± 50 mm

Last Answer : b) 250 ± 50 mm*

Compare AC & DC track circuits on i) Length of circuit ii) Application iii) Effect of stray currents. iv) Maintenance

Description : Compare AC & DC track circuits on i) Length of circuit ii) Application iii) Effect of stray currents. iv) Maintenance

Last Answer : Ans: i) Length of circuit - a) AC track circuit is having long length upto 3 to 5 km b) DC track circuit is having short length  ii)Application -a) AC track circuit is used ... ) Maintenance - a) AC track circuit has easier and cheaper maintenance b) DC track circuit has complicated maintenance 

How to care and maintenance of hand tools?

Description : How to care and maintenance of hand tools?

Last Answer : Ans: 1. Tools must be kept clean and free from corrosion 2. Keep metal parts lightly oiled 3. Remove burrs from edges of tools and heads of chisels. 4. Tools which are not in used must be stored separately 5. A good worker regularly inspects his tools 6. Do not use tools without handles

Mention What Are The Tools Used By Road Maintenance Worker?

Description : Mention What Are The Tools Used By Road Maintenance Worker?

Last Answer : Tools used by road maintenance worker are:  Swiss hammer  Drills  Jackhammers  Road-rollers  Epoxy guns  Chain drags  Pressure washers  Sand blasters, Saws, etc.

Are there any good tools that will keep track of my website's current registered and active users?

Description : Are there any good tools that will keep track of my website's current registered and active users?

Last Answer : answer:If your website offers registration, you should have a pretty good idea of the number of registered users. So I assume you instead want to know something else. What website content managing software are you using, if any? (e.g., Wordpress) What “account” are your users registered to?

Which functions of the General Assembly tends to fulfill the ideals of UN Charter apart from maintenance of peace? -SST 10th

Description : Which functions of the General Assembly tends to fulfill the ideals of UN Charter apart from maintenance of peace? -SST 10th

Last Answer : The General Assembly makes recommendations for the purpose of promoting international cooperation and encouraging the development of international law arid its modification. The General Assembly also assists ... fundamental freedom for all without distinction of race, sex, language and religion.

Biological functions of lipids include (A) Source of energy (B) Insulating material (C) Maintenance of cellular integrity (D) All of these

Description : Biological functions of lipids include (A) Source of energy (B) Insulating material (C) Maintenance of cellular integrity (D) All of these

Last Answer : Answer : D

Explain functions and responsibilities of maintenance department.

Description : Explain functions and responsibilities of maintenance department.  

Last Answer : Functions and duties of plant maintenance department 1)Inspection 2)Engineering 3) Maintenance 4) Repair 5) Overhaul 6)Construction 7) Salvage 8) Clerical work 1)Inspection: i) Inspection of ... , ii) of time progress on jobs pertaining to important features of building and production equipment.

What are the six tools in measurement for science experiments.?

Description : What are the six tools in measurement for science experiments.?

Last Answer : hi

Which of the following free tools/websites could help you identify which city in the world has the largest search for the keyword : "six sigma"? A. Alexa B. Google Trends C. Google Traker D. Word Tracker

Description : Which of the following free tools/websites could help you identify which city in the world has the largest search for the keyword : "six sigma"? A. Alexa B. Google Trends C. Google Traker D. Word Tracker

Last Answer : D. Word Tracker

A new railway line is required to be constructed beaus’ of following reasons (a) Strategic and political considerations (b) Development of backward area (c) To shorten existing rail link (d) Any of them*

Description : A new railway line is required to be constructed beaus’ of following reasons (a) Strategic and political considerations (b) Development of backward area (c) To shorten existing rail link (d) Any of them*

Last Answer : d) Any of them*

1. Which of the statements with regard to formation is correct (1) One of the Functions of the formation is to facilitate drainage (2) Width of bank for double railway line is 12.155 meters (3) Width of cutting for double railway track is 11.750 meters (4) Centre to centre of formation for double line is 4.725 meters (5) Width of formation is different for concrete sleeper track and other than concrete sleeper track a) 2, 3, 5 b) 3, 4, 5* c) 2, 3, 4 d) 2, 4, 5

Description : 1. Which of the statements with regard to formation is correct (1) One of the Functions of the formation is to facilitate drainage (2) Width of bank for double railway line is 12.155 meters (3) Width of cutting for double railway track is 11. ... a) 2, 3, 5 b) 3, 4, 5* c) 2, 3, 4 d) 2, 4, 5

Last Answer : b) 3, 4, 5*

Describe in brief prevention of creep of rail

Description : Describe in brief prevention of creep of rail

Last Answer : Creep Prevention: 1. Pulling back the rails to original position. 2. Use of steel sleepers for good grip. 3. Provision of Anchors/Anti-creepers should be done. 4. By increasing number of sleepers per rail length. 5. Provision of sufficient ballast and packing with care.

What Functions,SP,tools are available within SQL for Creating XML?

Description : What Functions,SP,tools are available within SQL for Creating XML?

Last Answer : have a look here… http://msdn.microsoft.com/en-us/library/ms190922.aspx

In graphic package what is Paint environment and paint tools and their functions?

Description : In graphic package what is Paint environment and paint tools and their functions?

Last Answer : What is the answer ?

In the communication process, the decoding, encoding, feedback and response are together classified as A. communication tools B. communication channels C. communication functions D. communication parties

Description : In the communication process, the decoding, encoding, feedback and response are together classified as A. communication tools B. communication channels C. communication functions D. communication parties

Last Answer : C. communication functions

In the communication process, the media and message are considered as A. communication tools B. communication channels C. communication functions D. communication parties

Description : In the communication process, the media and message are considered as A. communication tools B. communication channels C. communication functions D. communication parties

Last Answer : A. communication tools

In the communication process, the receiver and sender are classified as A. communication functions B. communication parties C. communication tools D. communication channels

Description : In the communication process, the receiver and sender are classified as A. communication functions B. communication parties C. communication tools D. communication channels

Last Answer : B. communication parties

media and message are considered as_____________ in communication process A.tools B.channels C.functions D.parties

Description : media and message are considered as_____________ in communication process A.tools B.channels C.functions D.parties

Last Answer : A.tools

____________communication process, receiver and sender are classified as A.functions B.parties C.tools D.channels Answer: B

Description : ____________communication process, receiver and sender are classified as A.functions B.parties C.tools D.channels Answer: B

Last Answer : B.parties

Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b) iii ,is correct I,ii,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Description : Defects discovered by static analysis tools include: i. Variables that are never used. ii. Security vulnerabilities. iii. Programming Standard Violations iv. Uncalled functions and procedures a) i , ii,iii,iv is correct b ... ,iv are incorrect. c) i ,ii, iii and iv are incorrect d) iv, ii is correct

Last Answer : a) i , ii,iii,iv is correct

What are dynamic testing tools? Explain the functions that they must support.

Description : What are dynamic testing tools? Explain the functions that they must support.

Last Answer : Ans. Dynamic testing tools: 1: coverage analyzers (execution verifiers): A coverage analyzer is the most common and important tool for testing. It is often relatively simple. One of the common ... tester to plan tests so they are both efficient and also effective at forcing discovery of defects.

What maintenance is required for solar panels?

Description : What maintenance is required for solar panels?

Last Answer : Cleaning Sunlight powered chargers for the most part require next to no support to work. The main thing they need is an intermittent light Cleaning to ensure soil, leaves, and other garbage aren't impeding the sun's beams.

The nutrient required for quality maintenance in potato

Description : The nutrient required for quality maintenance in potato

Last Answer : Ans. Potassium

What Is The Skill Required To Become Maintenance And Repair Worker?

Description : What Is The Skill Required To Become Maintenance And Repair Worker?

Last Answer : To become maintenance and repair worker you must know:  Basic calculation  Safety practices and handling tools  Basic plumbing repair skills  Basic knowledge of electrical wiring  Ability to decipher written or oral instructions  Physical agility  Able to lift and move heavy objects.

Changes made to an information system to add the desired but not necessarily the required features is called (A) Preventative maintenance. (B) Adaptive maintenance. (C) Corrective maintenance. (D) Perfective maintenance.

Description : Changes made to an information system to add the desired but not necessarily the required features is called (A) Preventative maintenance. (B) Adaptive maintenance. (C) Corrective maintenance. (D) Perfective maintenance.

Last Answer : (D) Perfective maintenance.

Describe scheduled maintenance. What are its advantages ?

Description : Describe scheduled maintenance. What are its advantages ? 

Last Answer : Scheduled maintenance: Scheduled maintenance is a stich-in-time procedure which is aimed at avoiding breakdowns. Breakdowns can be dangerous to life and hence should be minimized. Scheduled ... , such as lubricating and retightening screws Lower long term costs compared with breakdown maintenance 

Describe online maintenance with respect to rotameter.

Description : Describe online maintenance with respect to rotameter. 

Last Answer : On line maintenance of Rotameter: In a chemical plant, it is a normal practice to do on line maintenance work. This avoids total shutdown of the equipment or plant. This is possible, if proper ... . Thus it is possible to attend maintenance jobs in the line without stopping the production.

Describe various factors considered for passive maintenance.

Description : Describe various factors considered for passive maintenance.

Last Answer : 1. Static Electricity: Static electricity or ESD can cause numerous problems within a system. The problems usually appear during the winter months when humidity is low or in extremely dry climates ... . The power-supply fan carries airborne particles through your system, and they collect inside. 

Describe the importance of preventive maintenance.

Description : Describe the importance of preventive maintenance.

Last Answer : Importance of Preventive Maintenance Preventive maintenance is one of the most ignored aspects of PC ownership, most people seem to think that the PC doesn't need preventive maintenance, and so ... time, and preventive maintenance will help to improve the speed of your system in these respects.

Describe any four preventive maintenance for hard disk.

Description : Describe any four preventive maintenance for hard disk.

Last Answer : Preventive maintenance of Hard Disk * Take periodic backup of data and critical areas such as boot sectors, FAT and directory structure on the disk. * Defragment the disk to maintain the disk efficiency ... at least once a year. * Reinstall all the software to maintain disk efficiency and speed.

Describe the general maintenance issues of the horizontal axis WPPs.

Description : Describe the general maintenance issues of the horizontal axis WPPs.

Last Answer : General Maintenance Issues of Horizontal Axis WPPs:  1. Gearbox failure.  2. Misalignment between generator and gearbox.  3. Problems related to lubrication.  4. Variation among the components by ... charging gear oil, brake pads, filters, bearings, sensors, actuators. 6. Bearing failure issue. 

Describe the factors affecting preventive maintenance schedule.

Description : Describe the factors affecting preventive maintenance schedule. 

Last Answer : Following factors affect the PM schedule:- 1. Non availability of spares & raw material. 2. Non availability of tools, trackless, jacks, fixture required for PM. 3. Non availability of trained & skilled ... the work is held up for certain period. This is also a cause of disturbing a PM schedule.

Given: True track 215; mountain elevation 11,600 ft; local airfield gives qnh as 1035 mb; Required terrain clearance 1500 ft; temparute ISA-15C Which of the following is the minimum flight level considering the temperature?

Description : Given: True track 215; mountain elevation 11,600 ft; local airfield gives qnh as 1035 mb; Required terrain clearance 1500 ft; temparute ISA-15C Which of the following is the minimum flight level considering the temperature?

Last Answer : FL140

Given: True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Description : Given: True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Last Answer : b. FL140

An aircraft is attempting to home to a VOR on the 064 radial. The CDI shows 4 dots fly right with a TO indication. At the same time the co-located DME shows a range of 45nm. Where is the aircraft in relation to the required track? a. 6nm right of track b. 3nm right of track c. 6nm left of track d. 3nm left of track

Description : An aircraft is attempting to home to a VOR on the 064 radial. The CDI shows 4 dots fly right with a TO indication. At the same time the co-located DME shows a range of 45nm. Where is the aircraft in relation ... right of track b. 3nm right of track c. 6nm left of track d. 3nm left of track

Last Answer : c. 6nm left of track

True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Description : True track 215; mountain elevation 11,600ft; local airfield gives QNH as 1035mb; required terrain clearance 1500ft; temperature ISA -15C. Which of the following is the minimum flight level considering the temperature? a. FL150 b. FL140 c. FL120 d. FL110

Last Answer : b. FL140

............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Description : ............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Last Answer : A) Seek time

Weather protection of track is required during block for execution of AT Welding? (i) Yes.* (ii) No (iii) As decided by site supervisor (iv) As per site condition

Description : Weather protection of track is required during block for execution of AT Welding? (i) Yes.* (ii) No (iii) As decided by site supervisor (iv) As per site condition

Last Answer : (i) Yes.*

If the Disk head is located initially at track 32, find the number of disk moves required with FCFS scheduling criteria if the disk queue of I/O blocks requests are: 98, 37, 14, 124, 65, 67 (A) 320 (B) 322 (C) 321 (D) 319

Description : If the Disk head is located initially at track 32, find the number of disk moves required with FCFS scheduling criteria if the disk queue of I/O blocks requests are: 98, 37, 14, 124, 65, 67 (A) 320 (B) 322 (C) 321 (D) 319

Last Answer : (C) 321

A girl is walking at a speed of 15 km/hr along a railway track. If she is 600 m ahead of the train which is 300 m long and runs at a speed of 180 km/hr in same direction, then what is the time required to pass a girl? A) 19.63sec B) 32sec C) 8.2sec D) 28.3sec

Description : A girl is walking at a speed of 15 km/hr along a railway track. If she is 600 m ahead of the train which is 300 m long and runs at a speed of 180 km/hr in same direction, then what is the time required to pass a girl? A) 19.63sec B) 32sec C) 8.2sec D) 28.3sec

Last Answer : ANSWER:A Explanation:  Speed of a girl = 15 km/hr  speed of train = 180 km/hr By using the condition, The speed values of train and the moving object are subtracted if they are moving in same ... /45.83 = 19.63  Hence the time taken by the train to cross the girl is 19.63seconds

What tools are required for installing laminate flooring?

Description : What tools are required for installing laminate flooring?

Last Answer : what kind of laminate? and onto what surface? basically, you need to do three things: measure, cut, and adhere. for measuring, you

What are the raw material machinery tools and equipment required for the production Coffee shop?

Description : What are the raw material machinery tools and equipment required for the production Coffee shop?

Last Answer : Need answer

Is a blow dryer required for use with Hot Tools 1051 Soft Bonnet Hair Dryer?

Description : Is a blow dryer required for use with Hot Tools 1051 Soft Bonnet Hair Dryer?

Last Answer : no this product has a built in heating element.