What Are The Different Types Of Tools Used In Pipe Fittings?

What Are The Different Types Of Tools Used In Pipe Fittings?
by

1 Answer

Answer :

Generally tools used in pipe fittings are Pipe vice, Pipe wrench, Pipe die, Pipe tap, Chain wrench, Chisel, Hammer, Reamer and Pipe cutter.
by

Related questions

What are the types of Pipe fittings?

Description : What are the types of Pipe fittings?

Last Answer : Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such ... Thredolet, Nipolet, Letrolet, Swepolet), Steam Traps, Long Radius Bend, Flanges and Valve etc.

How are Forged Pipe Fittings Made?

Description : How are Forged Pipe Fittings Made?

Last Answer : Pipe Fittings are Plumbing materials that support the course of flow in Adjustments such as elbows, tees. Changes the size of the tubing, for instance reducers, raising tees. Link different components ... fittings (Socket Weld and Threaded) are created in compliance with the standards of ASME (Am

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

tillage utilizes two or more different types of tools to simplify fields a) combined b) basic c) strip d) rotary

Description : tillage utilizes two or more different types of tools to simplify fields a) combined b) basic c) strip d) rotary

Last Answer : combined

What types of lighting fittings are used in the battery room?

Description : What types of lighting fittings are used in the battery room?

Last Answer : Flame proof acid resistant  

Explain About Common Types Of Pipe Materials And How Are Pipes Specified?

Description : Explain About Common Types Of Pipe Materials And How Are Pipes Specified?

Last Answer : Pipes are commonly made of cast iron , steel, copper, lead, zinc, galvanized iron(G.I) wrought iron , aluminium and also cement and plastic pipes are used. Generally pipes are specified by the length, material, bore size.

Name Different Pipe Fitting Accessories?

Description : Name Different Pipe Fitting Accessories?

Last Answer : Commonly used pipe fitting accessories are : Socket, Reducing socket, Cross, Union, Stop valve, Elbow, Union, Plug, Flange, Tee.

What tools can repair a drain pipe that is flooding?

Description : What tools can repair a drain pipe that is flooding?

Last Answer : The drain pipe in my basement is flooding. What are some drain pipe repair tools that will remedy this situation?

Where are the grease fittings for 2011 ford escape?

Description : Where are the grease fittings for 2011 ford escape?

Last Answer : Feel Free to Answer

What is the application and use of a range of electrical components Such as plugs switches sockets lighting and fittings junction boxes consumer units.?

Description : What is the application and use of a range of electrical components Such as plugs switches sockets lighting and fittings junction boxes consumer units.?

Last Answer : Need answer

Is there a difference between gray and white PVC piping and fittings?

Description : Is there a difference between gray and white PVC piping and fittings?

Last Answer : The only difference between gray and white PVC piping is in the color. They're both PVC.

PVC Fittings?

Description : PVC Fittings?

Last Answer : form_title= PVC Fittings form_header= Make DIY a snap with PVC fittings. How many fittings do you need?*= {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, More than 10} What size PVC do you need?*= _ [50] What will you be using the PVC for?*= _ [50]

What is Instrumentation Fittings?

Description : What is Instrumentation Fittings?

Last Answer : Instrumentation FittingsTube FittingsThere are four primary styles of high to low pressure tube fittings. They are differentiated by their end connections and applications, each having its own advantages and ... most pressure applications (up to 15,000 PSI) fitting sizes are specified by the

What manufacturing processes were applied to SS Forged Fittings?

Description : What manufacturing processes were applied to SS Forged Fittings?

Last Answer : There are four processes of manufacturing a SS forged fittings. First is Mandrel method, as the name suggests a curved mandrel is inserted into a length of pipe. Extrusion Method consists of a machine that ... a piece of pipe goes through a mould of the fittings and come out in the needed shape.

What are some brand names for bathroom fittings?

Description : What are some brand names for bathroom fittings?

Last Answer : Neat and Clean bathrooms with Modern bath fittings and design play a wonderful role in rendering pleasant and sumptuous bathing feel on relaxed weekends and hectic mornings. Various types of bathroom ... , your bathroom can be functional and beautiful in equal measure.some of the important bath

Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Description : Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

Cost of fittings and their fixing is specified for the following sanitary fittings (A) Water closets (B) Flushing pipes (C) Lavatory basins (D) All the above

Description : Cost of fittings and their fixing is specified for the following sanitary fittings (A) Water closets (B) Flushing pipes (C) Lavatory basins (D) All the above

Last Answer : (D) All the above

What is the required duration of hydrotest for fittings NPS 10’’ and larger? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.

Description : What is the required duration of hydrotest for fittings NPS 10’’ and larger? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.

Last Answer : c) 3 minutes.

What is the required duration of hydrotest for fittings NPS 2½ “thru 8"? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minute

Description : What is the required duration of hydrotest for fittings NPS 2½ “thru 8"? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minute

Last Answer : b) 2 minutes.

Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Description : Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Last Answer : b) Flanged fittings.

Is it permissible to install tapped holes in fittings per ASME B16.5 a) No. b) Yes. c) Yes, if the metal is thick enough to allow the required thread length. d) Yes, as permitted by ASME B16.20.

Description : Is it permissible to install tapped holes in fittings per ASME B16.5 a) No. b) Yes. c) Yes, if the metal is thick enough to allow the required thread length. d) Yes, as permitted by ASME B16.20.

Last Answer : c) Yes, if the metal is thick enough to allow the required thread length.

Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Description : Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Last Answer : d) All of the above.

How are reducing fittings designated in size? a) By the smaller size. b) By the larger size. c) By sizes. d) They are not designated by size, just class.

Description : How are reducing fittings designated in size? a) By the smaller size. b) By the larger size. c) By sizes. d) They are not designated by size, just class.

Last Answer : c) By sizes.

When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be used? e) Any applicable pressure rating. f) The lowest must be used. g) The highest must be used. h) Flanges may only meet one material specification.

Description : When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be ... . g) The highest must be used. h) Flanges may only meet one material specification.

Last Answer : e) Any applicable pressure rating.

What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Description : What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Last Answer : a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class.

When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure rating at -20°F. c) The pressure equal to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Description : When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure ... to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Last Answer : b) The pressure rating at -20°F.

Can a manufacturer or contractor use flanges or fittings made in conformance to an earlier edition ASME B16.5 on a current project? a) No. a) b) Yes. b) Yes, if in conformance with the current edition of ASME B16.5. c) Yes, if permitted by the owner-user.

Description : Can a manufacturer or contractor use flanges or fittings made in conformance to an earlier edition ASME B16.5 on a current project? a) No. a) b) Yes. b) Yes, if in conformance with the current edition of ASME B16.5. c) Yes, if permitted by the owner-user.

Last Answer : b) Yes, if in conformance with the current edition of ASME B16.5.

What size piping flanges and flanged fittings are addressed by ASME B16.5? a) 1/2" to 24" NPS. b) 1" to 36" NPS. c) 1/4" to 36" NPS. d) 1/4 to 48" NPS.

Description : What size piping flanges and flanged fittings are addressed by ASME B16.5? a) 1/2" to 24" NPS. b) 1" to 36" NPS. c) 1/4" to 36" NPS. d) 1/4 to 48" NPS.

Last Answer : a) 1/2" to 24" NPS.

Which of the following assets are dealt with by AS - 10 (Accounting Standard on Fixed Assets)? A. Land, building, plant and machinery, vehicles, furniture and fittings B. Goodwill and patents C. Trademarks and designs D. All of the above

Description : Which of the following assets are dealt with by AS - 10 (Accounting Standard on Fixed Assets)? A. Land, building, plant and machinery, vehicles, furniture and fittings B. Goodwill and patents C. Trademarks and designs D. All of the above

Last Answer : D. All of the above

How are fittings produced and where are they used?

Description : How are fittings produced and where are they used?

Last Answer : The technology for the production of steel reinforcement is determined by the requirements of GOST. Rebar can be produced in several ways: drawing, rolling, deformation. Drawing is an uneconomical ... can be easily moved around the construction site as the equipment is supplied with wheels.

From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Description : From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout

Last Answer : b.In line layout

Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Description : Which of the following process is suitable for making injection molding tools? a.SL b.SLS c.EBM d.FDM

Last Answer : b.SLS

How many maximum tools can ATC hold? a.60 b.80 c.90 d.100

Description : How many maximum tools can ATC hold? a.60 b.80 c.90 d.100

Last Answer : b.80

The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Description : The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Last Answer : e. A particle moving in gravitational field

The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Description : The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Last Answer : c. Frictional movement of a particle over a surface

Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?

Description : Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?

Last Answer :  Pipe vice. It is used to hold the pipe firmly while cutting, threading etc.  Pipe wrench. It is used fir tightening and loosening the pipes.

Describe The Methods Of Protecting Leakage At The Pipe Joint?

Description : Describe The Methods Of Protecting Leakage At The Pipe Joint?

Last Answer :  Threads joints should be fixed applying red lead, white lead, dry point etc. in the threads, bound the pipe threads using twine and tightened them fully with a suitable wrench.  Flanged joint should ... , leather, card board or soft metal in metal in between the inner sides of both the flanges.

What Is The Use Of Chain Wrench In Pipe Fitting?

Description : What Is The Use Of Chain Wrench In Pipe Fitting?

Last Answer : It is used to hold the pipe firmly and it is fit for rotation on both ways.

What Are Standard Pipe Threads?

Description : What Are Standard Pipe Threads?

Last Answer : Pipe threads are grouped in certain ranges such as 1/4” to 3/8” pipe threads have 19 T.P.I , ½ “ to 7/ 8” pipe threads have 14 T.P.I, 1” and above size pipe threads have 11 T.P.I . Pipe threads may be either straight or tapered.

Define Non Sparking Tools?

Description : Define Non Sparking Tools?

Last Answer : Non Sparking tools used in Gas, Oil and Chemicals. E.g. Brass hammer, Brass Wedge, Brass Spanner, Copper hammer, Copper rod , Brass rod , Brass chisel , Rubber hammer , Nylon hammer.

Mention What Are The Tools Used By Road Maintenance Worker?

Description : Mention What Are The Tools Used By Road Maintenance Worker?

Last Answer : Tools used by road maintenance worker are:  Swiss hammer  Drills  Jackhammers  Road-rollers  Epoxy guns  Chain drags  Pressure washers  Sand blasters, Saws, etc.

Harvesting can be done by a) Manully operated tools b) Animal drawn machines c) Mechanically operated machines d) All of the above

Description : Harvesting can be done by a) Manully operated tools b) Animal drawn machines c) Mechanically operated machines d) All of the above

Last Answer : All of the above

Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Description : Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Last Answer : heat pipe

Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Last Answer : 96%

A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg

Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Description : Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Last Answer : 24m/s

Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Last Answer : 7.85

Indus Valley Civilisation There was a sharp class division at Harappa and Mohenjo-Daro. This is clear from the _____. A. Indus seals excavated B. Religious beliefs of the Harappans C. Tools and implements used by the Harappans D. Different types of dwellings excavated

Description : Indus Valley Civilisation There was a sharp class division at Harappa and Mohenjo-Daro. This is clear from the _____. A. Indus seals excavated B. Religious beliefs of the Harappans C. Tools and implements used by the Harappans D. Different types of dwellings excavated

Last Answer : ANSWER: D

Name Different Types Of Cam Followers?

Description : Name Different Types Of Cam Followers?

Last Answer : Commonly used followers are, Pointed , Flat faced, Roller and Spherical faced.