Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Brick nogging type of partition wall, is constructed by
(A) Laying bricks as stretchers in cement mortar
(B) Laying bricks as headers in cement mortar
(C) Reinforcing brick wall with iron straps
(D) Constructing brick work within a wooden framework
by

1 Answer

Answer :

Answer: Option D
by

Related questions

In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond

Description : In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond

Last Answer : Answer: Option B

The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called (A) Flemish bond (B) English bond (C) Stretcher bond (D) Header bond

Description : The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called (A) Flemish bond (B) English bond (C) Stretcher bond (D) Header bond

Last Answer : Answer: Option B

Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Description : Which of the following should be used for hearting of thicker walls? (A) Headers (B) Stretchers (C) Brick bats (D) Queen closer

Last Answer : Answer: Option A

The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as (A) English cross bond (B) Dutch bond (C) Monk bond (D) Rat-trap b

Description : The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as (A) English cross bond (B) Dutch bond (C) Monk bond (D) Rat-trap bond

Last Answer : : Option B

Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Description : Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Last Answer : Answer: Option C

In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Description : In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Last Answer : Answer: Option D

The most important tool in brick laying for lifting and spreading mortar and for forming joints is (A) Trowel (B) Square (C) Bolster (D) Scutch

Description : The most important tool in brick laying for lifting and spreading mortar and for forming joints is (A) Trowel (B) Square (C) Bolster (D) Scutch

Last Answer : Answer: Option A

The type of bond in which every course contains both headers and stretchers, is called (A) English bond (B) Flemish bond (C) Russian band (D) Mixed bond

Description : The type of bond in which every course contains both headers and stretchers, is called (A) English bond (B) Flemish bond (C) Russian band (D) Mixed bond

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) In Flemish bond, headers and stretchers are laid alternately in the same course (B) In Flemish bond every header in each course lies centrally over every stretcher of the underlying course (C) In English bond, stretchers are laid in every course (D) In English bond, headers and stretchers are laid in alternate courses

Description : Pick up the incorrect statement from the following: (A) In Flemish bond, headers and stretchers are laid alternately in the same course (B) In Flemish bond every header in each course lies ... laid in every course (D) In English bond, headers and stretchers are laid in alternate courses

Last Answer : Answer: Option C

The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Description : The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Last Answer : (B) 1.25 m3

The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Last Answer : Answer: Option C

For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Description : For plastering the exposed brick walls, the cement sand mortar should be (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Last Answer : Answer: Option C

In ideal pavement is constructed with (A) Bricks (B) Hard soil (C) Portland cement concrete (D) Tar

Description : In ideal pavement is constructed with (A) Bricks (B) Hard soil (C) Portland cement concrete (D) Tar

Last Answer : Answer: Option C

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Description : The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Last Answer : Answer: Option B

The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Description : The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Last Answer : (B) 2.0 m3

The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Last Answer : Answer: Option C

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Last Answer : (c) 27

Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is called tucked joint (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Description : Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is ... (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Last Answer : Option D

Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Last Answer : Answer: Option A

How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400

How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400

Unlined wells are: a. Man-made b. Seasonal and not very deep. c. Supported by bricks d. Wall is constructed in a circular pattern

Description : Unlined wells are: a. Man-made b. Seasonal and not very deep. c. Supported by bricks d. Wall is constructed in a circular pattern

Last Answer : a. Man-made b. Seasonal and not very deep.

The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Description : The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Last Answer : Answer: Option A

For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Description : For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Last Answer : Answer: Option B

The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Last Answer : : Option B

The type of arch generally constructed over a wooden lintel or over a flat arch for the purpose of carrying the load of the wall above is (A) Segmental arch (B) Pointed arch (C) Relieving arch (D) Flat arch

Description : The type of arch generally constructed over a wooden lintel or over a flat arch for the purpose of carrying the load of the wall above is (A) Segmental arch (B) Pointed arch (C) Relieving arch (D) Flat arch

Last Answer : Option C

The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Last Answer : (D) All the above

Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Last Answer : Answer: Option D

The most common failure in constructing porcelain to metal is: A. Improper metal framework B. Rapid heating

Description : The most common failure in constructing porcelain to metal is: A. Improper metal framework B. Rapid heating

Last Answer : A. Improper metal framework

When you need an item for your home, what's your favorite online place to shop and what's your favorite "bricks and mortar" store to shop for such items?

Description : When you need an item for your home, what's your favorite online place to shop and what's your favorite "bricks and mortar" store to shop for such items?

Last Answer : I head to Sears.

The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these

Description : The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Description : Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Last Answer : Answer: Option D

For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Last Answer : Answer: Option D

Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Description : Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Last Answer : Answer: Option B

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Description : Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Last Answer : Answer: Option A

The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Description : The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Last Answer : Answer: Option B

As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Description : As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Last Answer : Following Precautionary measures are to be observe as a supervisor while constructing brick masonry: 1. Bricks should be as per the specification. The bricks should be well burnt, reddish in colour, sound and hard ... is used and for a period of about one to two weeks, if cement mortar is used.

Perennial canals are constructed by: a. Constructing barrages to regulate the flow of water b. Constructing an embankment c. Digging the ground around the canal d. None of the above

Description : Perennial canals are constructed by: a. Constructing barrages to regulate the flow of water b. Constructing an embankment c. Digging the ground around the canal d. None of the above

Last Answer : b. Constructing an embankment

The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Description : The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Last Answer : (D) 8.0 sq m

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

In a mortar, the binding material is (A) Cement (B) Sand (C) Surkhi (D) Cinder

Description : In a mortar, the binding material is (A) Cement (B) Sand (C) Surkhi (D) Cinder

Last Answer : Answer: Option A

For testing compressive and tensile strength of cement, the cement mortar is made by mixing cement and standard sand in the proportions of (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Description : For testing compressive and tensile strength of cement, the cement mortar is made by mixing cement and standard sand in the proportions of (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Last Answer : Answer: Option B

The minimum thickness of walls built in cement mortar (1 : 6) for a single storey building, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : The minimum thickness of walls built in cement mortar (1 : 6) for a single storey building, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option C

The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Description : The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D