What Is The Use Of Chain Wrench In Pipe Fitting?

What Is The Use Of Chain Wrench In Pipe Fitting?
by

1 Answer

Answer :

It is used to hold the pipe firmly and it is fit for rotation on both ways.
by

Related questions

Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?

Description : Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?

Last Answer :  Pipe vice. It is used to hold the pipe firmly while cutting, threading etc.  Pipe wrench. It is used fir tightening and loosening the pipes.

Name Different Pipe Fitting Accessories?

Description : Name Different Pipe Fitting Accessories?

Last Answer : Commonly used pipe fitting accessories are : Socket, Reducing socket, Cross, Union, Stop valve, Elbow, Union, Plug, Flange, Tee.

. Equivalent length of a pipe fitting is (A) Dependent on Reynolds number (B) Independent of Reynolds number (C) Dependent on the length of the pipe (D) None of these

Description : . Equivalent length of a pipe fitting is (A) Dependent on Reynolds number (B) Independent of Reynolds number (C) Dependent on the length of the pipe (D) None of these

Last Answer : (A) Dependent on Reynolds number

Can I use a metric socket on a standard socket wrench?

Description : Can I use a metric socket on a standard socket wrench?

Last Answer : No, you cannot use a metrc socket on a standard socket wrench. These are two different systems of measurement and are not interchangeable.

How does the mechanism in a switchable socket wrench work?

Description : How does the mechanism in a switchable socket wrench work?

Last Answer : answer:Yahoo Answers says, It's a simple ratchet system with a toothed wheel and spring loaded pawl that allows one way operation. It's very similar to a bike wheel freewheel, except in socket ratchet ... an over-centre system to bias them one way or the other, allowing the mechanism to be reversed.

If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Description : If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Last Answer :

Anyone know where to find 18mm double box wrench?

Description : Anyone know where to find 18mm double box wrench?

Last Answer : Try Snap on tools, or Sears Craftmen tools.

What size hex wrench for moen part 155023 set crew?

Description : What size hex wrench for moen part 155023 set crew?

Last Answer : Need answer

What size wrench do you need when replacing brake pads on a 2012 Kia Sportage?

Description : What size wrench do you need when replacing brake pads on a 2012 Kia Sportage?

Last Answer : Feel Free to Answer

What occupation uses a wrench and a blowtorch starting with p?

Description : What occupation uses a wrench and a blowtorch starting with p?

Last Answer : It is Plumbing or plumber.

Is monkey wrench common or proper?

Description : Is monkey wrench common or proper?

Last Answer : What is the answer ?

What occupation uses a wrench and a blowtorch starting with p?

Description : What occupation uses a wrench and a blowtorch starting with p?

Last Answer : It is Plumbing or plumber.

What is a hydraulic torque wrench used for?

Description : What is a hydraulic torque wrench used for?

Last Answer : A hydraulic torque wrench is a tool used to exert torque on a fastener, to either loosen or fasten to satisfaction. Torque is the twisting force used by the body and the tool to achieve your results. ... at supply chains (Lowes, Home Depot†) or rent, depending on how often you plan to use it.

Does the Milwaukee 3/4 In. 18V Impact Wrench come with a battery.It says tool only?

Description : Does the Milwaukee 3/4 In. 18V Impact Wrench come with a battery.It says tool only?

Last Answer : It comes with a battery.They mean it doesn't come with sockets or other bits.

I need a impact shutoff wrench for 50Nm which is durable and have low maintenance cost. Is kilews have ?

Description : I need a impact shutoff wrench for 50Nm which is durable and have low maintenance cost. Is kilews have ?

Last Answer : You can go with KILEWS impact shut-off tool SKC-PTM series, in this tool you can set different torque value with the help of controlling impact counting and force and as per your ... more details please visit website microntechgroup or contact nearest city office of Microntech Engg. pvt. ltd.

The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Description : The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Last Answer : Answer: C

Oil Filter Wrench

Description : Oil Filter Wrench

Last Answer : They say that there's a tool for every job, and using anything else other than it is essentially running the risk of either botching up the job or being less efficient with it. For changing ... driver. When you turn the driver counterclockwise, the gears cause the prongs to clench the filter body.

Are "mines" a fitting metaphor for "free radicals"?

Description : Are "mines" a fitting metaphor for "free radicals"?

Last Answer : I would think of free radicals as a rusting of the body.

Where to find a slim-fitting denim jacket?

Description : Where to find a slim-fitting denim jacket?

Last Answer : Looks like you have several options

Ladies, even when you wear something loose-fitting round your neck, do you get the feeling that you can't take it, it seems to choke you?

Description : Ladies, even when you wear something loose-fitting round your neck, do you get the feeling that you can't take it, it seems to choke you?

Last Answer : I feel that way about my wrists. I don't wear bracelets or watches, and I prefer my sleeves to be either ¾ length or long enough that I'm wearing them more around the palms of my hands. Hospital tags ... drink bug the hell out of me. Doubly so because they always want to put it on my right wrist.

What's the best way to make a barb fitting that's a bit small for the tubing give a water-tight fit? [See details].

Description : What's the best way to make a barb fitting that's a bit small for the tubing give a water-tight fit? [See details].

Last Answer : answer:I'm thinking teflon plumber's tape might do the job. Would that work? It seems like it would give you a nice seal, if understand what you are trying to do. I'm not good at math at all, really, ... is. I did that calculation on google; not by myself. That's the only way I could do the math.

What kind of reptile seems fitting for me?

Description : What kind of reptile seems fitting for me?

Last Answer : answer:Well nix a Komodo Dragon, you’d have to keep it in a 15 foot pen and feed it goats. lol Hmmm…..a Chameleon perhaps. Maybe research small insect eating lizards or….vegetarian lizards to start. Have fun!

What's the fitting process for Vibram Five Fingers shoes?

Description : What's the fitting process for Vibram Five Fingers shoes?

Last Answer : My stepson says “No socks.” They’re in European sizes, so the best thing to do is try a pair on in person for fit and then buy them online. For reference, a 43 is about equivalent to a mens’ 10½ US size.

(Creativity encouraged) What is a fitting death for vehicle thieves?

Description : (Creativity encouraged) What is a fitting death for vehicle thieves?

Last Answer : I’d just like to know why they have to die..

What would be a fitting epitaph to your personal life story?

Description : What would be a fitting epitaph to your personal life story?

Last Answer : Here lies Fiddle Bastard We planted him raw He was quick on the trigger But slow on the draw

How have you dealt with the feeling of not "fitting in" with a group or organization with which you continued to remain affiliated?

Description : How have you dealt with the feeling of not "fitting in" with a group or organization with which you continued to remain affiliated?

Last Answer : I once spent a few months working and socialising in a business and community where I was the only Caucasian. The rest were Pacific Islanders. I was made very welcome, but I never quite fitted and I was ... fitted very well - once I had left and then returned a few months on. It was quite strange.

Can you help me find a fitting web Content Management System?

Description : Can you help me find a fitting web Content Management System?

Last Answer : I’m a big fan of Wordpress. wordpress.com is hosted on their servers, wordpress.org is hosted on yours.

I'm having a hard time fitting in at my school as a freshman... any advice?

Description : I'm having a hard time fitting in at my school as a freshman... any advice?

Last Answer : Question: Doesn’t the private school have uniforms?

What happens during a contact lens fitting? Can I drive afterward?

Description : What happens during a contact lens fitting? Can I drive afterward?

Last Answer : Usually, when you go in for a fitting they give you a sample pair to wear, to make sure your eyes take to the contacts. If all goes well, you make a return appointment to pick the rest of them up ... way you can wear the glasses while you drive and just put the contacts in once you get to L.A.

Will you tell me about fitting in at your job?

Description : Will you tell me about fitting in at your job?

Last Answer : First question I have is What do you mean you never say the things they want to hear you say? Like what? Secondly, yep! You want to advance? Then in addition to your good work you have to play ... no matter how much you hate it. And NEVER say something bad about the boss. They WILL get it back!

What's the tightest fitting, ant proof garbage can I can buy?

Description : What's the tightest fitting, ant proof garbage can I can buy?

Last Answer : Instead of fighting ants in the trash, I would invest in an exterminator to come in and take care of the problem with a real solution.

What is this slogan fitting for katniss in hunger games?

Description : What is this slogan fitting for katniss in hunger games?

Last Answer : Feel Free to Answer

Who has a reputation for making good fitting dentures?

Description : Who has a reputation for making good fitting dentures?

Last Answer : Who has a reputation for making good fitting dentures?

What measurements are needed to buy a proper fitting dog harness for our husky?

Description : What measurements are needed to buy a proper fitting dog harness for our husky?

Last Answer : Usually dog harnesses come in a few size fits all sizes. Small medium and large dog. A measurement across the chest from outside front leg to outside front leg should get you in the ball park.

When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by _____________. A. knotting the cords together at the plugs B. taping the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Last Answer : Answer: D

The divisional supdt may sanction EDSO/EDBO Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 5000/- d) 75000/

Description : The divisional supdt may sanction EDSO/EDBO Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 5000/- d) 75000/

Last Answer : c) 5000/

The divisional supdt may sanction LSG SO Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 75000/

Description : The divisional supdt may sanction LSG SO Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 75000/

Last Answer : b) 30000/

The divisional supdt may sanction Sub divisional office Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 15000/

Description : The divisional supdt may sanction Sub divisional office Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 15000/

Last Answer : d) 15000/

The divisional supdt may sanction divisional office Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 75000/

Description : The divisional supdt may sanction divisional office Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 75000/

Last Answer : b) 30000/

For the same terminal conditions and fitting size, the least friction lossis incurred in a/an(A) T-joint(B) Union(C) 45° elbow(D) 90°bend

Description : For the same terminal conditions and fitting size, the least friction lossis incurred in a/an (A) T-joint (B) Union (C) 45° elbow (D) 90°bend

Last Answer : (B) Union

Of the following oxygen administration devices, which has the advantage of providing high oxygen concentration? a) Non-rebreather mask The non-rebreather mask provides high oxygen concentration but is usually poor fitting. b) Venturi mask The Venturi mask provides low levels of supplemental oxygen. c) Catheter The catheter is an inexpensive device that provides a variable fraction of inspired oxygen and may cause gastric distention. d) Face tent A face tent provides a fairly accurate fraction of inspired oxygen, but is bulky and uncomfortable. It would not be the device of choice to provide high oxygen concentration.

Description : Of the following oxygen administration devices, which has the advantage of providing high oxygen concentration? a) Non-rebreather mask The non-rebreather mask provides high oxygen concentration but is ... and uncomfortable. It would not be the device of choice to provide high oxygen concentration.

Last Answer : a) Non-rebreather mask The non-rebreather mask provides high oxygen concentration but is usually poor fitting.

What is the required duration of hydrotest or fitting NPS 2" and smaller? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.

Description : What is the required duration of hydrotest or fitting NPS 2" and smaller? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.

Last Answer : a) 1 minute

May sockets be provided in the wall of a fitting? a) No. b) Yes. c) Yes, in accordance with ASME B16.5, figure 4. d) Yes, as permitted in ASME B16.20.

Description : May sockets be provided in the wall of a fitting? a) No. b) Yes. c) Yes, in accordance with ASME B16.5, figure 4. d) Yes, as permitted in ASME B16.20.

Last Answer : c) Yes, in accordance with ASME B16.5, figure 4.

When the center of a blind flange is raised, how much smaller in diameter shall the raised portion be in relation to the ID of the fitting? a) 1/2". b) 3/4". c) 1" d) 1.25"

Description : When the center of a blind flange is raised, how much smaller in diameter shall the raised portion be in relation to the ID of the fitting? a) 1/2". b) 3/4". c) 1" d) 1.25"

Last Answer : c) 1"

Which of the following is not required to be marked on an ASME B16.5 flange or flanged fitting? a) Manufactures name or trademark. b) Material. c) Ratting class and "B16". d) Temperature.

Description : Which of the following is not required to be marked on an ASME B16.5 flange or flanged fitting? a) Manufactures name or trademark. b) Material. c) Ratting class and "B16". d) Temperature.

Last Answer : d) Temperature.

For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of the bolts to prevent leakage. c) Immediate replacement is recommended if the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Description : For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of ... the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Last Answer : b) Periodic tightening of the bolts to prevent leakage.

When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Description : When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Last Answer : a) Risk of leakage due to forces and moments developed.

The temperature shown for a given pressure rating by class is normally? a) The temperature of the flanged fitting. b) The temperature of the process fluid within. c) The process temperature minus 20°F. d) A and B.

Description : The temperature shown for a given pressure rating by class is normally? a) The temperature of the flanged fitting. b) The temperature of the process fluid within. c) The process temperature minus 20°F. d) A and B.

Last Answer : d) A and B.

The flange markings on a flanged fitting indicate which of the following? a) Pressure. b) Pressure at a specified temperature. c) Flange class. d) Maximum pressure.

Description : The flange markings on a flanged fitting indicate which of the following? a) Pressure. b) Pressure at a specified temperature. c) Flange class. d) Maximum pressure.

Last Answer : c) Flange class.

What is over fitting?

Description : What is over fitting?

Last Answer : Whenever there is a large set of possible hypotheses, one has to be careful not to use the resulting freedom to find meaningless “regularity” in the data. This problem is called over fitting.