Description : What Is The Use Of Chain Wrench In Pipe Fitting?
Last Answer : It is used to hold the pipe firmly and it is fit for rotation on both ways.
Description : . Equivalent length of a pipe fitting is (A) Dependent on Reynolds number (B) Independent of Reynolds number (C) Dependent on the length of the pipe (D) None of these
Last Answer : (A) Dependent on Reynolds number
Description : There are a few accessories necessary for plough are . a) Jointer b) Coulter c) Land wheel d) All of above
Last Answer : All of above
Description : What Are The Different Types Of Tools Used In Pipe Fittings?
Last Answer : Generally tools used in pipe fittings are Pipe vice, Pipe wrench, Pipe die, Pipe tap, Chain wrench, Chisel, Hammer, Reamer and Pipe cutter.
Description : Are "mines" a fitting metaphor for "free radicals"?
Last Answer : I would think of free radicals as a rusting of the body.
Description : Where to find a slim-fitting denim jacket?
Last Answer : Looks like you have several options
Description : Ladies, even when you wear something loose-fitting round your neck, do you get the feeling that you can't take it, it seems to choke you?
Last Answer : I feel that way about my wrists. I don't wear bracelets or watches, and I prefer my sleeves to be either ¾ length or long enough that I'm wearing them more around the palms of my hands. Hospital tags ... drink bug the hell out of me. Doubly so because they always want to put it on my right wrist.
Description : What's the best way to make a barb fitting that's a bit small for the tubing give a water-tight fit? [See details].
Last Answer : answer:I'm thinking teflon plumber's tape might do the job. Would that work? It seems like it would give you a nice seal, if understand what you are trying to do. I'm not good at math at all, really, ... is. I did that calculation on google; not by myself. That's the only way I could do the math.
Description : What kind of reptile seems fitting for me?
Last Answer : answer:Well nix a Komodo Dragon, you’d have to keep it in a 15 foot pen and feed it goats. lol Hmmm…..a Chameleon perhaps. Maybe research small insect eating lizards or….vegetarian lizards to start. Have fun!
Description : What's the fitting process for Vibram Five Fingers shoes?
Last Answer : My stepson says “No socks.” They’re in European sizes, so the best thing to do is try a pair on in person for fit and then buy them online. For reference, a 43 is about equivalent to a mens’ 10½ US size.
Description : (Creativity encouraged) What is a fitting death for vehicle thieves?
Last Answer : I’d just like to know why they have to die..
Description : What would be a fitting epitaph to your personal life story?
Last Answer : Here lies Fiddle Bastard We planted him raw He was quick on the trigger But slow on the draw
Description : How have you dealt with the feeling of not "fitting in" with a group or organization with which you continued to remain affiliated?
Last Answer : I once spent a few months working and socialising in a business and community where I was the only Caucasian. The rest were Pacific Islanders. I was made very welcome, but I never quite fitted and I was ... fitted very well - once I had left and then returned a few months on. It was quite strange.
Description : Can you help me find a fitting web Content Management System?
Last Answer : I’m a big fan of Wordpress. wordpress.com is hosted on their servers, wordpress.org is hosted on yours.
Description : I'm having a hard time fitting in at my school as a freshman... any advice?
Last Answer : Question: Doesn’t the private school have uniforms?
Description : What happens during a contact lens fitting? Can I drive afterward?
Last Answer : Usually, when you go in for a fitting they give you a sample pair to wear, to make sure your eyes take to the contacts. If all goes well, you make a return appointment to pick the rest of them up ... way you can wear the glasses while you drive and just put the contacts in once you get to L.A.
Description : Will you tell me about fitting in at your job?
Last Answer : First question I have is What do you mean you never say the things they want to hear you say? Like what? Secondly, yep! You want to advance? Then in addition to your good work you have to play ... no matter how much you hate it. And NEVER say something bad about the boss. They WILL get it back!
Description : What's the tightest fitting, ant proof garbage can I can buy?
Last Answer : Instead of fighting ants in the trash, I would invest in an exterminator to come in and take care of the problem with a real solution.
Description : What is this slogan fitting for katniss in hunger games?
Last Answer : Feel Free to Answer
Description : Who has a reputation for making good fitting dentures?
Last Answer : Who has a reputation for making good fitting dentures?
Description : What measurements are needed to buy a proper fitting dog harness for our husky?
Last Answer : Usually dog harnesses come in a few size fits all sizes. Small medium and large dog. A measurement across the chest from outside front leg to outside front leg should get you in the ball park.
Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above
Last Answer : Answer: D
Description : The divisional supdt may sanction EDSO/EDBO Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 5000/- d) 75000/
Last Answer : c) 5000/
Description : The divisional supdt may sanction LSG SO Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 75000/
Last Answer : b) 30000/
Description : The divisional supdt may sanction Sub divisional office Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 15000/
Last Answer : d) 15000/
Description : The divisional supdt may sanction divisional office Rs_____ p.a purchase of furniture and fitting for office. a) 25000/- b) 30000/- c) 50000/- d) 75000/
Description : For the same terminal conditions and fitting size, the least friction lossis incurred in a/an (A) T-joint (B) Union (C) 45° elbow (D) 90°bend
Last Answer : (B) Union
Description : Of the following oxygen administration devices, which has the advantage of providing high oxygen concentration? a) Non-rebreather mask The non-rebreather mask provides high oxygen concentration but is ... and uncomfortable. It would not be the device of choice to provide high oxygen concentration.
Last Answer : a) Non-rebreather mask The non-rebreather mask provides high oxygen concentration but is usually poor fitting.
Description : What is the required duration of hydrotest or fitting NPS 2" and smaller? a) 1 minute b) 2 minutes. c) 3 minutes. d) 5 minutes.
Last Answer : a) 1 minute
Description : May sockets be provided in the wall of a fitting? a) No. b) Yes. c) Yes, in accordance with ASME B16.5, figure 4. d) Yes, as permitted in ASME B16.20.
Last Answer : c) Yes, in accordance with ASME B16.5, figure 4.
Description : When the center of a blind flange is raised, how much smaller in diameter shall the raised portion be in relation to the ID of the fitting? a) 1/2". b) 3/4". c) 1" d) 1.25"
Last Answer : c) 1"
Description : Which of the following is not required to be marked on an ASME B16.5 flange or flanged fitting? a) Manufactures name or trademark. b) Material. c) Ratting class and "B16". d) Temperature.
Last Answer : d) Temperature.
Description : For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of ... the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.
Last Answer : b) Periodic tightening of the bolts to prevent leakage.
Description : When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.
Last Answer : a) Risk of leakage due to forces and moments developed.
Description : The temperature shown for a given pressure rating by class is normally? a) The temperature of the flanged fitting. b) The temperature of the process fluid within. c) The process temperature minus 20°F. d) A and B.
Last Answer : d) A and B.
Description : The flange markings on a flanged fitting indicate which of the following? a) Pressure. b) Pressure at a specified temperature. c) Flange class. d) Maximum pressure.
Last Answer : c) Flange class.
Description : What is over fitting?
Last Answer : Whenever there is a large set of possible hypotheses, one has to be careful not to use the resulting freedom to find meaningless “regularity” in the data. This problem is called over fitting.
Description : The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field
Last Answer : e. A particle moving in gravitational field
Description : The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum
Last Answer : c. Frictional movement of a particle over a surface
Description : Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?
Last Answer : Pipe vice. It is used to hold the pipe firmly while cutting, threading etc. Pipe wrench. It is used fir tightening and loosening the pipes.
Description : Describe The Methods Of Protecting Leakage At The Pipe Joint?
Last Answer : Threads joints should be fixed applying red lead, white lead, dry point etc. in the threads, bound the pipe threads using twine and tightened them fully with a suitable wrench. Flanged joint should ... , leather, card board or soft metal in metal in between the inner sides of both the flanges.
Description : Explain About Common Types Of Pipe Materials And How Are Pipes Specified?
Last Answer : Pipes are commonly made of cast iron , steel, copper, lead, zinc, galvanized iron(G.I) wrought iron , aluminium and also cement and plastic pipes are used. Generally pipes are specified by the length, material, bore size.
Description : What Are Standard Pipe Threads?
Last Answer : Pipe threads are grouped in certain ranges such as 1/4” to 3/8” pipe threads have 19 T.P.I , ½ “ to 7/ 8” pipe threads have 14 T.P.I, 1” and above size pipe threads have 11 T.P.I . Pipe threads may be either straight or tapered.
Description : Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator
Last Answer : heat pipe
Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe? a) 96% b) 86% c) 76% d) 66%
Last Answer : 96%
Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam? a) 95.56% b) 70.10% c) 95.20% d) 85.10% Formula: h1 = hf1 + x1hfg1
Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg
Description : Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe? a. 34m/s b. 24m/s c. 15m/s d. 27m/s
Last Answer : 24m/s
Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec? a. 7.85 b. 6.85 c. 8.85 d. 5.85 V = Aν
Last Answer : 7.85
Description : Where can I find different types of bratz dolls and accessories to buy?
Last Answer : Websites like toysrus dot com and bratz dot com have brats dolls for sale. The prices quoted on the website ranges somewhere around 12 USD. They also ship for free if you make a purchase of 79 USD.
Description : List the different body accessories used for passenger cars and explain any two body accessories with their function
Last Answer : (1) Body Cover: To keep the car covered in open parking. (2) Puncture Repair Kit: To repair the punctured vehicle in case of emergency (3) Tyre Inflator: To fill the air in the flat tyre. ... of seasons. (11) Sun Roof: To provide natural air conditioning to the car. (12) Infotainment system