Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?

Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?
by

1 Answer

Answer :

 Pipe vice. It is used to hold the pipe firmly while cutting, threading etc.
 Pipe wrench. It is used fir tightening and loosening the pipes.
by

Related questions

What Is The Use Of Chain Wrench In Pipe Fitting?

Description : What Is The Use Of Chain Wrench In Pipe Fitting?

Last Answer : It is used to hold the pipe firmly and it is fit for rotation on both ways.

What occupation uses a wrench and a blowtorch starting with p?

Description : What occupation uses a wrench and a blowtorch starting with p?

Last Answer : It is Plumbing or plumber.

What occupation uses a wrench and a blowtorch starting with p?

Description : What occupation uses a wrench and a blowtorch starting with p?

Last Answer : It is Plumbing or plumber.

Explain Briefly The Use Of Clutch?

Description : Explain Briefly The Use Of Clutch?

Last Answer : Clutch is used to connect and disconnect the driving and driven units of a machine. It does the function when machine speed is changed after stopping the driving unit.

Explain Briefly About Friction And Anti-friction Bearings?

Description : Explain Briefly About Friction And Anti-friction Bearings?

Last Answer :  Friction bearings. This type of bearings contact that shaft directly such as bush bearing ,journal bearing etc. These bearings generally made of cast iron ,brass and gun metal.  Anti-friction bearings. These type of bearings have rolling elements such as balls, rollers etc.

How does the mechanism in a switchable socket wrench work?

Description : How does the mechanism in a switchable socket wrench work?

Last Answer : answer:Yahoo Answers says, It's a simple ratchet system with a toothed wheel and spring loaded pawl that allows one way operation. It's very similar to a bike wheel freewheel, except in socket ratchet ... an over-centre system to bias them one way or the other, allowing the mechanism to be reversed.

If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Description : If you were to be personified as a hand tool, I.E. combination wrench, screwdriver, etc. what tool would you be?

Last Answer :

Anyone know where to find 18mm double box wrench?

Description : Anyone know where to find 18mm double box wrench?

Last Answer : Try Snap on tools, or Sears Craftmen tools.

What size hex wrench for moen part 155023 set crew?

Description : What size hex wrench for moen part 155023 set crew?

Last Answer : Need answer

What size wrench do you need when replacing brake pads on a 2012 Kia Sportage?

Description : What size wrench do you need when replacing brake pads on a 2012 Kia Sportage?

Last Answer : Feel Free to Answer

Is monkey wrench common or proper?

Description : Is monkey wrench common or proper?

Last Answer : What is the answer ?

What is a hydraulic torque wrench used for?

Description : What is a hydraulic torque wrench used for?

Last Answer : A hydraulic torque wrench is a tool used to exert torque on a fastener, to either loosen or fasten to satisfaction. Torque is the twisting force used by the body and the tool to achieve your results. ... at supply chains (Lowes, Home Depot†) or rent, depending on how often you plan to use it.

Can I use a metric socket on a standard socket wrench?

Description : Can I use a metric socket on a standard socket wrench?

Last Answer : No, you cannot use a metrc socket on a standard socket wrench. These are two different systems of measurement and are not interchangeable.

Does the Milwaukee 3/4 In. 18V Impact Wrench come with a battery.It says tool only?

Description : Does the Milwaukee 3/4 In. 18V Impact Wrench come with a battery.It says tool only?

Last Answer : It comes with a battery.They mean it doesn't come with sockets or other bits.

I need a impact shutoff wrench for 50Nm which is durable and have low maintenance cost. Is kilews have ?

Description : I need a impact shutoff wrench for 50Nm which is durable and have low maintenance cost. Is kilews have ?

Last Answer : You can go with KILEWS impact shut-off tool SKC-PTM series, in this tool you can set different torque value with the help of controlling impact counting and force and as per your ... more details please visit website microntechgroup or contact nearest city office of Microntech Engg. pvt. ltd.

The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Description : The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Last Answer : Answer: C

Oil Filter Wrench

Description : Oil Filter Wrench

Last Answer : They say that there's a tool for every job, and using anything else other than it is essentially running the risk of either botching up the job or being less efficient with it. For changing ... driver. When you turn the driver counterclockwise, the gears cause the prongs to clench the filter body.

What is the instrument that the woman uses in "The Grudge 3" (briefly shown in grudge 2) during the exorcism thing?

Description : What is the instrument that the woman uses in "The Grudge 3" (briefly shown in grudge 2) during the exorcism thing?

Last Answer : A triangle???

Explain About Common Types Of Pipe Materials And How Are Pipes Specified?

Description : Explain About Common Types Of Pipe Materials And How Are Pipes Specified?

Last Answer : Pipes are commonly made of cast iron , steel, copper, lead, zinc, galvanized iron(G.I) wrought iron , aluminium and also cement and plastic pipes are used. Generally pipes are specified by the length, material, bore size.

What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Description : What is defined as the direct conversion of a substance from the solid to the vapor state or vice versa without passing the liquid state?  A. Condensation  B. Vaporization  C. Sublimation  D. Cryogenation

Last Answer : Sublimation

The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Description : The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Last Answer : e. A particle moving in gravitational field

The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Description : The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Last Answer : c. Frictional movement of a particle over a surface

What Are The Different Types Of Tools Used In Pipe Fittings?

Description : What Are The Different Types Of Tools Used In Pipe Fittings?

Last Answer : Generally tools used in pipe fittings are Pipe vice, Pipe wrench, Pipe die, Pipe tap, Chain wrench, Chisel, Hammer, Reamer and Pipe cutter.

Describe The Methods Of Protecting Leakage At The Pipe Joint?

Description : Describe The Methods Of Protecting Leakage At The Pipe Joint?

Last Answer :  Threads joints should be fixed applying red lead, white lead, dry point etc. in the threads, bound the pipe threads using twine and tightened them fully with a suitable wrench.  Flanged joint should ... , leather, card board or soft metal in metal in between the inner sides of both the flanges.

Name Different Pipe Fitting Accessories?

Description : Name Different Pipe Fitting Accessories?

Last Answer : Commonly used pipe fitting accessories are : Socket, Reducing socket, Cross, Union, Stop valve, Elbow, Union, Plug, Flange, Tee.

What Are Standard Pipe Threads?

Description : What Are Standard Pipe Threads?

Last Answer : Pipe threads are grouped in certain ranges such as 1/4” to 3/8” pipe threads have 19 T.P.I , ½ “ to 7/ 8” pipe threads have 14 T.P.I, 1” and above size pipe threads have 11 T.P.I . Pipe threads may be either straight or tapered.

Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Description : Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Last Answer : heat pipe

Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Last Answer : 96%

A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg

Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Description : Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Last Answer : 24m/s

Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Last Answer : 7.85

Will someone explain, as briefly as possible, what the deal is in the Middle East?

Description : Will someone explain, as briefly as possible, what the deal is in the Middle East?

Last Answer : I’M RIGHT. No, I’m right. Because I’m right, I’m bombing you. Then I’m bombing you, too.

Can someone briefly explain bloodtypes?

Description : Can someone briefly explain bloodtypes?

Last Answer : From here Blood types, as people commonly know, has a classification which is simply based on two things: * ABO group * Rhesus factor Now, the ABO group, depends on two antigens; antigen A and antigen B ... of O- (universal donor). Both factors combine to form the blood types as we know them today.

Briefly explain any two factors responsible for the depletion of forests in India. -Geography

Description : Briefly explain any two factors responsible for the depletion of forests in India. -Geography

Last Answer : Factors responsible for the depletion of forests in India are : 1. Thoughtless and rapid exploitation of forest resources as per the demand of the increasing population. 2. For acquiring land for agriculture, industries and construction purposes, the forests have been cut down recklessly.

Briefly explain the geological evolution of the Himalayas. -Geography

Description : Briefly explain the geological evolution of the Himalayas. -Geography

Last Answer : The Himalayan ranges were formed when the Indian plate was driven northwards and pushed beneath the Eurasian Plate. With the advance of the Indian Plate towards the north, the Tethys started ... fracture into thrust edges. About 20-30 million years ago, the Himalayan ranges started emerging.

Briefly explain any two adverse effects of small and fragmented holdings on agricultural productivity -Geography

Description : Briefly explain any two adverse effects of small and fragmented holdings on agricultural productivity -Geography

Last Answer : Effects of small fragmented holdings on agricultural productivity are : 1. Low agricultural productivity and backward state of our agriculture is due to the large amount of time and ... of fertile agricultural land is wasted in providing boundaries. The farmer cannot concentrate on improvements.

Briefly explain any two problems caused by Green Revolution with respect to Indian agriculture. -Geography

Description : Briefly explain any two problems caused by Green Revolution with respect to Indian agriculture. -Geography

Last Answer : Two problems of Green Revolution are : 1. Inter-crop Imbalances : Though all the crops like wheat, rice, jowar, bazaar and maize have gained from Green Revolution, it is wheat which has benefited ... Pradesh in the south. It has hardly touched Eastern India, Assam, Bihar, West Bengal and Odisha.

(i) Briefly explain the geological evolution of the peninsular plateau. -Geography

Description : (i) Briefly explain the geological evolution of the peninsular plateau. -Geography

Last Answer : (i) During the pre-Cambrian era, there was a large depression in which the sediment was deposited and a block of crystal rock known as the Peninsula Plateau came out of this depression and ... are deposited forming a triangular-shaped feature which is known as Delta, ex: Ganga Brahmaputra delta.

Briefly explain the three advantages of using roadways in comparison to railways. -Geography

Description : Briefly explain the three advantages of using roadways in comparison to railways. -Geography

Last Answer : 1. Road transport is more flexible than rail as buses, trucks and cars may be stopped anywhere and at any time for passengers and goods whereas trains stop at stations only. 2. Roads can ... Road transport provides door to door service, can connect farms, fields, factories and market very easily.

Briefly explain the geological formation of the Peninsular Plateau. -Geography

Description : Briefly explain the geological formation of the Peninsular Plateau. -Geography

Last Answer : During the Pre-Cambrian era, there was a large depression in which the sediment was deposited and a block of crystal rocks known as the Peninsular Plateau came out and never submerged again. It is ... , striking the Central Asiatic plate raised up to form the high Himalayas out of the Tethys Sea.

Briefly explain each of the following: 1. The trees in the Tropical Desert Forest have-stunted growth. -Geography

Description : Briefly explain each of the following: 1. The trees in the Tropical Desert Forest have-stunted growth. -Geography

Last Answer : 1. To minimize loss of water. Lack of water and minerals in the soil. 2. This is due to promotion of Social Forestry. 3. This is due to longer dry season.

Explain briefly the meaning of the following terms: (i) Composting. (ii) Incineration. (iii) Segregation. -Geography

Description : Explain briefly the meaning of the following terms: (i) Composting. (ii) Incineration. (iii) Segregation. -Geography

Last Answer : (i) Composting: It is a process that involves decomposition of organic waste into humus known as compost which is a good fertilizer for the plants. (ii) Incineration: It is a ... at source into different categories of biodegradable and non-degradable waste, this process is called Segregation.

Briefly explain two reasons for forests being an important natural resource. -Geography

Description : Briefly explain two reasons for forests being an important natural resource. -Geography

Last Answer : Forest are important natural resource because : (i) They provide timber, medicinal plants etc. (ii) They help in purifying air and giving rain.

Explain briefly the outcome of democracy? -SST 10th

Description : Explain briefly the outcome of democracy? -SST 10th

Last Answer : . The first step towards evaluating outcome of democracy is to recognise that democracy is just a form of government. It means democracy provides an opportunity and it is the citizens who can take ... that it is a legitimate government. It means all decisions are taken as per the constitution only.

Briefly explain the rise of London as an industrial and modern city. -SST 10th

Description : Briefly explain the rise of London as an industrial and modern city. -SST 10th

Last Answer : . Industrialisation changed the form of urbanisation in the modern period. . The early industrial cities of Britain such as Leeds and Manchester attracted large number of migrants to the textile mills ... fold from 1 million to 4 million; as the Industrial Revolution attracted more and more people.

Briefly explain the incident of the Jallianwala Bagh massacre and its effects on Punjab. -SST 10th

Description : Briefly explain the incident of the Jallianwala Bagh massacre and its effects on Punjab. -SST 10th

Last Answer : . On 13th April 1919, the infamous Jallianwala Bagh incident took place. . On that day, a crowd of villagers who had come to Amritsar to attend a fair gathered in the enclosed ... . The government responded with brutal repression. Seeing violence spread, Mahatma Gandhi called off the movement.

explain briefly the concept of horizontal distribution of power -SST 10th

Description : explain briefly the concept of horizontal distribution of power -SST 10th

Last Answer : Horizontal Power sharing. 1. Under the horizontal power sharing power is shared among different organs of government such as the legislature, executive and judiciary. 2. Under horizontal distribution of power, organs of the government are placed at the same level to exercise different powers.

explain briefly the concept of horizontal distribution of power -SST 10th

Description : explain briefly the concept of horizontal distribution of power -SST 10th

Last Answer : 'Horizontal Power sharing. 1. Under the horizontal power sharing power is shared among different organs of government such as the legislature, executive and judiciary. 2. Under horizontal distribution of power, organs of the government are placed at the same level to exercise different powers.

Explain briefly any four features of intensive subsistence farming in India. -SST 10th

Description : Explain briefly any four features of intensive subsistence farming in India. -SST 10th

Last Answer : Four features of intensive subsistence farming in India are as follows : (i) This type of farming is practised in areas of high population pressure on land, mainly in the east and south of ... and his family produce mainly cereal crops like rice and millets for subsistence and for local market.

Briefly explain how the challenge of deepening of democracy can be met? -SST 10th

Description : Briefly explain how the challenge of deepening of democracy can be met? -SST 10th

Last Answer : It means strengthening the existing institutions of democracy and practices of democracy. As different people, different countries have different people, different countries have different expectations from ... role of money power, the influence of the rich on making governmental decisions.