Pick up the correct statement from the following: (A) Styrene resin is produced from ethylene which is made from petroleum (B) Styrene resin is light in weight (C) Styrene resin transmits ultraviolet waves of light (D) All the above

Pick up the correct statement from the following:
(A) Styrene resin is produced from ethylene which is made from petroleum
(B) Styrene resin is light in weight
(C) Styrene resin transmits ultraviolet waves of light
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Description : Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and can absorb both ultraviolet & visible light (C) Hydrocarbon pollutants are produced by sweet gum, oak & natural rubber trees (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Description : Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and ... at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Last Answer : (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Description : Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Last Answer : Answer: Option D

A substance that transmits almost all of the light waves falling upon it is known as what type of substance?

Description : A substance that transmits almost all of the light waves falling upon it is known as what type of substance?

Last Answer : Transparent.

Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Description : Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Last Answer : (1) Isoprene Explanation: Isoprene was first isolated by thermal decomposition of natural rubber. About 95% of isoprene production is used to produce cis-1,4- polyisoprene—a synthetic version of natural rubber.

The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : (4) Ethylene Explanation: Ethylene is a rather stable molecule that polymerizes only upon contact with catalysts. The conversion is highly exothermic, that is the process releases a lot of heat. ... is the most pervasive technology, which means that metal chlorides or metal oxides are used.

The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Last Answer : Styrene

Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Description : Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Last Answer : Isoprene

The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : Ethylene

Irradiation of water by ultraviolet light of suitable wavelength iscommonly used for disinfection of water in (A) Food industry (B) Municipal sewage treatment (C) Petroleum refinery (D) Iron & steel plant

Description : Irradiation of water by ultraviolet light of suitable wavelength iscommonly used for disinfection of water in (A) Food industry (B) Municipal sewage treatment (C) Petroleum refinery (D) Iron & steel plant

Last Answer : (A) Food industry

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Last Answer : (A) 1: 3

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

What transmits sound waves to the inner ear making waves in the fluid in the cochlea?

Description : What transmits sound waves to the inner ear making waves in the fluid in the cochlea?

Last Answer : The ossicles amplify the sound. They send the sound waves to the inner ear and into the fluid-filled hearing organ (cochlea). ... The auditory nerve sends these impulses to the brain. The brain then translates these electrical impulses as sound.

Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, is known as a plane wave (C) The relative phase difference between the waves is important and not the absolute phase of a point on the wave (D) All of these

Description : Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, ... waves is important and not the absolute phase of a point on the wave (D) All of these

Last Answer : Answer: Option D

Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Description : Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Last Answer : (4) All of the above Explanation: A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics.

Radio waves, microwaves, infra-red spectrum, ultraviolet rays, X-rays and gamma rays are classified as ______. (1) light waves (2) electromagnetic waves (3) electric waves (4) magnetic waves

Description : Radio waves, microwaves, infra-red spectrum, ultraviolet rays, X-rays and gamma rays are classified as ______. (1) light waves (2) electromagnetic waves (3) electric waves (4) magnetic waves

Last Answer : (2) electromagnetic waves Explanation: Electromagnetic radiation is the radiant energy released by certain electromagnetic processes. It consists of electromagnetic waves which are synchronized oscillations of electric and magnetic fields that propagate at the speed of light through a vacuum.

Any energy which radiates in the form of radio waves, infrared waves, light waves, x-rays, etc. A. Radiant energy B. Electromagnetic C. Heat D. Ultraviolet

Description : Any energy which radiates in the form of radio waves, infrared waves, light waves, x-rays, etc. A. Radiant energy B. Electromagnetic C. Heat D. Ultraviolet

Last Answer : B. Electromagnetic

Band of light waves, that are too short to be seen by human eye. A. Visible B. Infrared C. Ultraviolet D. Amber

Description : Band of light waves, that are too short to be seen by human eye. A. Visible B. Infrared C. Ultraviolet D. Amber

Last Answer : C. Ultraviolet

An example of transverse waves is visible light/Ultraviolet

Description : An example of transverse waves is visible light/Ultraviolet

Last Answer : light/x-rays.

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to the shape of the particles, concrete aggregates are classified as rounded irregular, angular and flaky (C) According to the surface texture of the particles, the concrete aggregates are classified as glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Description : Pick up the correct statement from the following: (A) According to the petrological characteristics, concrete aggregates are classified as heavy weight, normal weight and light weight (B) According to ... glassy, smooth, granular, rough, crystalline, honey combed and porous (D) All the above

Last Answer : Answer: Option D

Pick up the synthetic resin from the following: (A) Urea resin (B) Phenolic resin (C) Resorcinol resin (D) All of these

Description : Pick up the synthetic resin from the following: (A) Urea resin (B) Phenolic resin (C) Resorcinol resin (D) All of these

Last Answer : Answer: Option D

Which one of the following statements is correct regarding the GPS satellites? (A) The nominal altitude is about 20,200 km (B) The inclination of axis satellite is 55° (C) The satellite transmits two L band signals (L1 with 1575.42 MHz and L2 with 1276.6 MHz) (D) All of these

Description : Which one of the following statements is correct regarding the GPS satellites? (A) The nominal altitude is about 20,200 km (B) The inclination of axis satellite is 55° (C) The satellite transmits two L band signals (L1 with 1575.42 MHz and L2 with 1276.6 MHz) (D) All of these

Last Answer : Answer: Option D

Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile & butadiene (B) Acrylonitrile & styrene (C) Isobutylene & isoprene (D) None of these

Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile & butadiene (B) Acrylonitrile & styrene (C) Isobutylene & isoprene (D) None of these

Last Answer : (A) Acrylonitrile & butadiene

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation

__________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Description : __________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Last Answer : (A) Styrene

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation

Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile and butadiene (B) Acrylonitrile and styrene (C) Isobutylene and isoprene (D) None of these

Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile and butadiene (B) Acrylonitrile and styrene (C) Isobutylene and isoprene (D) None of these

Last Answer : (A) Acrylonitrile and butadiene

Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed, the head developed is maximum which is known as shut-off head (C) At a particular speed the discharge at which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel for structural purpose as it is more homogenous (C) Basic Bessemer process is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Description : Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel ... is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Last Answer : Answer: Option D

How does the wavelength of infrared compared the wavelength of ultraviolet waves?

Description : How does the wavelength of infrared compared the wavelength of ultraviolet waves?

Last Answer : Wavelength of infra red would be greater than that of ultraviolet waves.

The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Description : The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Last Answer : ANSWER: D

The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Description : The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Last Answer : ANSWER: D

A mobile phone sends and receives messages through _____. A. Radio waves B. Ultraviolet waves C. Micro waves D. Sound waves

Description : A mobile phone sends and receives messages through _____. A. Radio waves B. Ultraviolet waves C. Micro waves D. Sound waves

Last Answer : ANSWER: A

The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Description : The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Last Answer : ANSWER: D

A mobile phone sends and receives messages through _____. A. Radio waves B. Ultraviolet waves C. Micro waves D. Sound waves

Description : A mobile phone sends and receives messages through _____. A. Radio waves B. Ultraviolet waves C. Micro waves D. Sound waves

Last Answer : ANSWER: A

The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Description : The waves used for sending signals to the satellite from ground station are _____. A. Ultraviolet rays B. X-rays C. Sound waves D. Micro waves

Last Answer : ANSWER: D