Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch
Last Answer : (A) Catalytic dehydrogenation of ethyl benzene
Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch
Description : Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid
Last Answer : (A) Styrene
Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration
Last Answer : (A) Dehydrogenation
Description : Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene
Last Answer : (C) Isopropanol
Description : Cumene is the starting material for the production of (A) Benzoic acid (B) Phenol and acetone (C) Isoprene (D) Styrene
Last Answer : (B) Phenol and acetone
Description : Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these
Last Answer : (A) Oxidation of naphthalene
Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available
Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available
Description : Catalytic oxidation of toluene produces (A) Styrene (B) Phenol (C) Benzene (D) Tri-nitro-toluene
Last Answer : (B) Phenol
Description : Which of the following is an organometallic compound? (A) Isopropyl alcohol (B) Tetra-ethyl lead (C) Zeolite (D) Cumene
Last Answer : (B) Tetra-ethyl lead
Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride
Last Answer : (A) Formaldehyde
Description : Isopropyl benzene produced by alkylation of benzene with propylene is known as (A) Neoprene (B) Cumene (C) Gelatin (D) Mercaptans
Last Answer : (B) Cumene
Description : Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol
Last Answer : (D) Phenol
Description : The process used for the manufacture of ethyl alcohol from molasses is (A) Distillation (B) Dehydration (C) Dehydrogenation (D) None of these
Last Answer : (D) None of these
Description : Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene
Last Answer : (D) Benzene
Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Cumene (isopropyl benzene) is made by (A) Oxidation of naphthalene (B) Propylene alkylation of benzene (C) Polymerisation of a mixture of benzene & propylene (D) None of these
Last Answer : (B) Propylene alkylation of benzene
Description : Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)
Last Answer : (B) Ethyl alcohol-water
Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide
Last Answer : (D) Benzene hexachloride is not a contact insecticide
Description : Benzene reacts with propene in the presence of H2SO4 catalyst to give (a) n-Propylbenzene (b) Benzophenone (c) Cumene (d) Nothing happens
Last Answer : Cumene
Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine
Last Answer : (C) Benzene
Description : Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone
Last Answer : Answer : D
Description : Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane
Last Answer : (B) Ethylene oxide
Description : __________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether
Last Answer : (B) Ethyl alcohol
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)
Last Answer : (C) Polychlorophrene
Description : Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these
Last Answer : (C) Phthalic anhydride
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber
Description : Aniline is prepared by (a) the reaction of benzene with ammonia (b) the reduction of nitrobenzene with Sn/HCl (c) the dehydrogenation of nitrobenzene (d) the reaction of nitrobenzene with I2/NaOH
Last Answer : the reduction of nitrobenzene with Sn/HCl
Description : Oxidation of cumene with acidic K2Cr2O7 gives (a) Phenylacetic acid (b) Benzaldehyde (c) Benzyl alcohol (d) Benzoic acid
Last Answer : Benzoic acid
Description : Dehydrogenation of Isopropanol produces (A) Propyl alcohol (B) Acetone (C) Trichloroethylene (D) Formaldehyde
Last Answer : (B) Acetone
Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane
Last Answer : (A) Methyl alcohol
Description : Ethyl alcohol cannot be produced (A) From waste sulphite substrate of paper mills (B) By Esterification and hydrolysis of ethylene (C) From molasses (D) None of these
Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material
Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine
Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide
Last Answer : (A) Propane & phenol-cresol mixture
Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine
Description : . Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol
Last Answer : (A) Benzene, toluene & xylene
Description : Aspirin is produced by heating salicylic acid with (a) acetic anhydride in the presence of phosphoric acid (b) benzoic anhydride in the presence of phosphoric acid (c) methyl alcohol in the presence of sulfuric acid (d) phenol in the presence of sulfuric acid
Last Answer : acetic anhydride in the presence of phosphoric acid
Description : Commercially ethylene is produced from naphtha by (A) Catalytic cracking (B) Catalytic dehydrogenation (C) Pyrolysis (D) Hydrocracking
Last Answer : (D) Hydrocracking
Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT
Last Answer : (B) Cyclohexane
Description : Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles
Last Answer : Methyl alcohol is produced by fermentation of sugars
Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these
Last Answer : (B) Vacuum
Description : Fermentation of molasses to produce ethyl alcohol is done at __________ °C. (A) 20 - 30 (B) < - 5 (C) 100 - 150 (D) 250 - 300
Last Answer : (A) 20 - 30
Description : Liquor poisoning generally occurs due to the presence of __________ in it. (A) Ethyl alcohol (B) Impurities (C) Methyl alcohol (D) Carbonic acid
Last Answer : (C) Methyl alcohol
Description : Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (1) Phenol (2) p-cresol (3) Benzoic acid (4) Benzene sulphonic acid (5) A
Last Answer : Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (1) Phenol (2) p-cresol ... P-toluedine (7) Picric acid (8) Squaric acid
Description : Phenol is more reactive than benzene towards electrophilic substitution reaction. In case of Phenol, the intermediate carbocation is more resonance st
Last Answer : Phenol is more reactive than benzene towards electrophilic substitution reaction. In case of Phenol, the ... D. A is incorrect but R is correct
Description : Benzene diazonium chloride on reaction with phenol in a basic medium gives:
Last Answer : Benzene diazonium chloride on reaction with phenol in a basic medium gives: A. benzene B. chlorobenzene C. diphenyl ether D. p-hydroxy azobenzene
Description : Assertion: Phenol is more reactive than benzene towards electrophilic reactions. Reason : The +R effect of OH group increases the electron density on
Last Answer : Assertion: Phenol is more reactive than benzene towards electrophilic reactions. Reason : The +R effect of ... D. A is incorrect but R is correct
Description : Which of the following reactions does not produce benzene as one of the products? (a) Treating benzenediazonium chloride with H3PO2 (b) Distilling phenol with zinc dust (c) Fusing sodium benzoate with NaOH (d) Fusing sodium benzenesulfonate with NaOH
Last Answer : Fusing sodium benzenesulfonate with NaOH