Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Pick out the wrong statement.
(A) For the manufacture of styrene, the major raw materials are benzene and
ethylene
(B) One important copolymer of styrene is SBR, which is widely used in the
manufacture of automobile tyres
(C) Manufacture of phenol by chloroben-zene-eaustic process involves. The
chlorination of benzene, causticisation and hydrolysis
(D) Phenol manufacture by chlorobenzene-caustic process is competitive
even when low cost chlorine is not available
by

1 Answer

Answer :

(D) Phenol manufacture by chlorobenzene-caustic process is competitive
even when low cost chlorine is not available
by

Related questions

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral is obtained by the chlorination of ethyl alcohol (C) Insecticides acting on the insects through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Last Answer : (D) Benzene hexachloride is not a contact insecticide

__________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these

Description : __________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these

Last Answer : (A) Styrene butadiene rubber (SBR

Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Description : Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Last Answer : (C) Neoprene is a natural rubber

Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Description : Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Last Answer : (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)

Due to its excellent permeability to air/gas and oxidation resistance, the tubes of automobile tyres is made of(A) Cold SBR(B) Butyl rubber(C) Bunai N(D) Buna S

Description : Due to its excellent permeability to air/gas and oxidation resistance, the tubes of automobile tyres is made of (A) Cold SBR (B) Butyl rubber (C) Bunai N (D) Buna S

Last Answer : (B) Butyl rubber

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Last Answer : (C) Polychlorophrene

Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

Caprolactam, a raw material for the manufacture of nylon-6, isproduced from(A) Phenol(B) Naphthalene(C) Benzene(D) Pyridine

Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Iodobenzene can be prepared by (a) treating chlorobenzene with I2 using FeCl3 catalyst. (b) treating phenol with I2 in NaOH solution. (c) treating benzenediazonium chloride with KI (d) treating benzene with CH3I using AlCl3 catalyst

Description : Iodobenzene can be prepared by (a) treating chlorobenzene with I2 using FeCl3 catalyst. (b) treating phenol with I2 in NaOH solution. (c) treating benzenediazonium chloride with KI (d) treating benzene with CH3I using AlCl3 catalyst

Last Answer : treating benzenediazonium chloride with KI

Benzenediazonium chloride reacts with warm water to give (a) Aniline (b) Phenol (c) Benzene (d) Chlorobenzene

Description : Benzenediazonium chloride reacts with warm water to give (a) Aniline (b) Phenol (c) Benzene (d) Chlorobenzene

Last Answer : Phenol

. Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel(C) Consecutive(D) None of these

Description : . Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel (C) Consecutive (D) None of these

Last Answer : (C) Consecutive

Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Description : Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Last Answer : (A) Styrene

__________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Description : __________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Last Answer : (A) Styrene

Catalytic oxidation of toluene produces (A) Styrene (B) Phenol (C) Benzene (D) Tri-nitro-toluene

Description : Catalytic oxidation of toluene produces (A) Styrene (B) Phenol (C) Benzene (D) Tri-nitro-toluene

Last Answer : (B) Phenol

'Chlorination' is 1. A process of converting chlorides into chlorine 2. Adding small amounts of chlorine to impure water 3. A chemical reaction in which chlorine is formed 4. An addition reaction of ethylene and chlorine The correct statements are: (a) 1 and 4 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Description : 'Chlorination' is 1. A process of converting chlorides into chlorine 2. Adding small amounts of chlorine to impure water 3. A chemical reaction in which chlorine is formed 4. An addition reaction of ethylene and chlorine The correct statements are: (a) 1 and 4 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(b)

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Which of the following reagents is most suitable for preparing chlorobenzene from benzene? (a) Aqueous chlorine (b) Chlorine in the presence of ultraviolet light (c) Chlorine in acetic acid (d) Chlorine in the presence of FeCl3

Description : Which of the following reagents is most suitable for preparing chlorobenzene from benzene? (a) Aqueous chlorine (b) Chlorine in the presence of ultraviolet light (c) Chlorine in acetic acid (d) Chlorine in the presence of FeCl3

Last Answer : Chlorine in the presence of FeCl3

Benzene reacts with chlorine in the presence of FeCl3 catalyst to form (a) Hexachlorobenzene (b) Chlorobenzene (c) Hexachlorocyclohexane (d) Benzyl chloride

Description : Benzene reacts with chlorine in the presence of FeCl3 catalyst to form (a) Hexachlorobenzene (b) Chlorobenzene (c) Hexachlorocyclohexane (d) Benzyl chloride

Last Answer : Chlorobenzene

Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene

Description : Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene

Last Answer : (B) SBR

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

Pick up the correct statement from the following: (A) Styrene resin is produced from ethylene which is made from petroleum (B) Styrene resin is light in weight (C) Styrene resin transmits ultraviolet waves of light (D) All the above

Description : Pick up the correct statement from the following: (A) Styrene resin is produced from ethylene which is made from petroleum (B) Styrene resin is light in weight (C) Styrene resin transmits ultraviolet waves of light (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) Both laundry as well as toilet soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Description : Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) ... soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Last Answer : (A) Transparent soaps are made by cold process

Raw water treated with only chlorine, is known as (A) Plain chlorination (B) Pre-chlorination (C) First-chlorination (D) De-chlorination

Description : Raw water treated with only chlorine, is known as (A) Plain chlorination (B) Pre-chlorination (C) First-chlorination (D) De-chlorination

Last Answer : (A) Plain chlorination

Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Description : Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Last Answer : (A) Polymers made of only one monomer is called homopolyme

Saponification involves the hydrolysis of fats and oils by- (1) water (2) washing soda (3) stearic acid (4) caustic soda

Description : Saponification involves the hydrolysis of fats and oils by- (1) water (2) washing soda (3) stearic acid (4) caustic soda

Last Answer : (4) caustic soda Explanation: Caustic soda (sodium hydroxide) is a versatile alkali. Its main uses are in the manufacture of pulp and paper, alumina, soap and detergents, petroleum products and chemical production.

Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

What is the major organic product of the reaction between benzene and isobutyl chloride in the presence of AlCl3? (a) tert-butylbenzene (b) isobutylbenzene (c) n-butylbenzene (d) chlorobenzene

Description : What is the major organic product of the reaction between benzene and isobutyl chloride in the presence of AlCl3? (a) tert-butylbenzene (b) isobutylbenzene (c) n-butylbenzene (d) chlorobenzene

Last Answer : tert-butylbenzene

Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda

__________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Description : __________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Last Answer : (B) Resilience

Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Last Answer : (D) Poly chloroprene

SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Last Answer : (A) 1: 3

Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Description : Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Last Answer : (C) A synthetic polymer

Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Last Answer : (B) Stainless steel or glass lined vessel

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Last Answer : (B) A synthetic polymer

Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Polychlorophrene

Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Polychlorophrene

Last Answer : (D) Polychlorophrene

Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)

Description : Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Last Answer : Answer: Option D