Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene
Last Answer : Phenol and formaldehyde
Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol
Last Answer : (A) Adipic acid and Hexamethylene diamine
Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these
Last Answer : (D) None of these
Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these
Description : Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene
Last Answer : (1) Isoprene Explanation: Isoprene was first isolated by thermal decomposition of natural rubber. About 95% of isoprene production is used to produce cis-1,4- polyisoprene—a synthetic version of natural rubber.
Last Answer : Isoprene
Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : In a co-polymer, the repeating units contain two different monomers. Which of the following is a copolymer? (A) PTFE (B) Buna-S (C) PMMA (D) Polycaprolactam
Last Answer : (B) Buna-S
Description : Buna-S is obtained by the copolymerisation of butadiene and:
Last Answer : Buna-S is obtained by the copolymerisation of butadiene and: A. Chloroprene B. styrene C. acrylonitrile D. adipic acid
Description : Which of the following polymer does not contain 1,3-butadiene as one of the monomers?
Last Answer : Which of the following polymer does not contain 1,3-butadiene as one of the monomers? A. Butyl rubber B. Nitrile rubber C. ABS rubber D. SBR
Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid
Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.
Description : Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone
Last Answer : Acetic acid
Description : Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid
Last Answer : Ethylene glycol
Description : When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol
Last Answer : Oxalic acid
Description : Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde (c) Acetic acid (d) Acetaldehyde
Last Answer : Formic acid
Description : Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid
Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid
Last Answer : Terephthalic acid
Description : Styrene Butadiene Rubber; Neoprene; Thiokole are the examples of?
Last Answer : Synthetic rubber
Description : Styrene butadiene rubber (SBR) is never used for making (A) Coated fabrics (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)
Last Answer : (B) Front wheel tyres of aeroplanes (i.e., heavy duty tyres)
Description : Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation
Last Answer : (D) Emulsion polymerisation
Description : __________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these
Last Answer : (A) Styrene butadiene rubber (SBR
Description : __________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength
Last Answer : (B) Resilience
Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile & butadiene (B) Acrylonitrile & styrene (C) Isobutylene & isoprene (D) None of these
Last Answer : (A) Acrylonitrile & butadiene
Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene
Last Answer : (D) Poly chloroprene
Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1
Last Answer : (A) 1: 3
Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm
Last Answer : (A) 5°C and 1 kgf/cm
Description : Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)
Last Answer : (C) Polychlorophrene
Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer
Last Answer : (B) Engineering plastic
Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm
Last Answer : (A) 50°C and 3 - 4 kg/cm
Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome
Last Answer : (C) A synthetic polymer
Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron
Last Answer : (B) Stainless steel or glass lined vessel
Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium
Last Answer : (A) Stainless steel or glass lined steel
Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber
Last Answer : (B) A synthetic polymer
Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber
Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Polychlorophrene
Last Answer : (D) Polychlorophrene
Description : Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)
Description : Nitrile rubber is produced by the polymerisation of (A) Acrylonitrile and butadiene (B) Acrylonitrile and styrene (C) Isobutylene and isoprene (D) None of these
Last Answer : (A) Acrylonitrile and butadiene
Description : The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene
Last Answer : (4) Ethylene Explanation: Ethylene is a rather stable molecule that polymerizes only upon contact with catalysts. The conversion is highly exothermic, that is the process releases a lot of heat. ... is the most pervasive technology, which means that metal chlorides or metal oxides are used.
Description : The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene
Last Answer : Ethylene
Description : Vitamin required for metabolism of diols e.g. conversion of ethylene glycol to acetaldehyde is (A) Thiamin (B) Cobalamin (C) Pyridoxine (D) Folic acid
Last Answer : Answer : B
Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid
Last Answer : (A) Ethylene glycol
Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene
Last Answer : (A) Terylene
Description : Natural rubber is a polymer derived from? (1) ethylene (2) propylene (3) isoprene (4) butadiene
Last Answer : (3) isoprene Explanation: Natural rubber is an addition polymer that is obtained as a milky white fluid known as latex from a tropical rubber tree.
Description : Natural rubber is a polymer derived from - (1) ethylene (2) propylene (3) isoprene (4) butadiene
Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these
Last Answer : (C) 0.6
Description : (3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is ... A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).
Last Answer : Rust is - (1) A mixture of Fe₂O₃ and Fe(OH) ₂ (2) A mixture of FeO and Fe(OH)₂ (3) FeO only (4) A mixture of Fe₂O₃, 3H₂O and FeO
Description : The chemical used in enabalining biological materials is – (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde
Last Answer : (1) formaldehyde in water Explanation: Embalming fluids use formaldehyde as a preservative. Formaldehyde is the simplest aldehyde with the chemical formula HCHO. Formalin is a solution of formaldehyde ... based embalming fluids are much kinder to the environment than those used in previous years.
Description : Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.
Last Answer : Sulfur.