Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Pick up the correct statement from the following:
(A) Catalysts are added to assist and accelerate the hardening of resin
(B) The fillers are inert materials and they impart strength and hardness
(C) Fibrous fillers increase thermal resistance
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication(C) Develop new improved properties not present in the original resin(D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resin (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Description : Pick up correct statement from the following: (A) Fibre boards are used for thermal and acoustic control (B) Fibre boards are used for light weight standing members (C) Fibre boards are obtained by impregnating a resin product on fibres (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service temperature (C) Fillers: Does not affect the property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Description : Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service ... property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Last Answer : Option C

Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Description : Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its (A) Elasticity (B) Strength (C) Plasticity (D) Weathering characteristics

Last Answer : (D) Weathering characteristics

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Description : In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Last Answer : (C) Appreciable strain hardening is produced

Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share

ick up the incorrect statement from the following: (A) Admixtures accelerate hydration (B) Admixtures make concrete water proof (C) Admixtures make concrete acid proof (D) Admixtures give high strength

Description : ick up the incorrect statement from the following: (A) Admixtures accelerate hydration (B) Admixtures make concrete water proof (C) Admixtures make concrete acid proof (D) Admixtures give high strength

Last Answer : Answer: Option A

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Description : Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Last Answer : (C) Iron salts can be used over a limited range of pH values

Pick up the correct statement from the following: (A) High percentage of C3S and low percentage of C2S cause rapid hardening (B) High percentage of C3S and low percentage of C2S make the cement less resistive to chemical attack (C) Low percentage of C3S and high percentage of C2S contribute to slow hardening (D) All the above

Description : Pick up the correct statement from the following: (A) High percentage of C3S and low percentage of C2S cause rapid hardening (B) High percentage of C3S and low percentage of C2S make the cement ... ) Low percentage of C3S and high percentage of C2S contribute to slow hardening (D) All the above

Last Answer : Answer: Option D

Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Description : Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Last Answer : (C) Impart resistance to penetration by liquids

The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame

Description : The increase in hardness of metal due to its cold working is termed as the __________ hardening. (A) Work (B) Age (C) Induction (D) Flame

Last Answer : (A) Work

Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction

Description : Cold working of a material results in increase in hardness, which is termed as the __________ hardening. (A) Cold (B) Work (C) Age (D) Induction

Last Answer : (B) Work

Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Styrene resin is produced from ethylene which is made from petroleum (B) Styrene resin is light in weight (C) Styrene resin transmits ultraviolet waves of light (D) All the above

Description : Pick up the correct statement from the following: (A) Styrene resin is produced from ethylene which is made from petroleum (B) Styrene resin is light in weight (C) Styrene resin transmits ultraviolet waves of light (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Last Answer : Answer: Option D

What is an important requisite for fillers in dental composite restorative resins in load bearing areas: A. Sub micro sized particles B. High coefficient of thermal expansion C. High in content (High filler)

Description : What is an important requisite for fillers in dental composite restorative resins in load bearing areas: A. Sub micro sized particles B. High coefficient of thermal expansion C. High in content (High filler)

Last Answer : C. High in content (High filler)

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : : Option B

Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Description : Addition of __________ to steel does not impart hardness. (A) Nickel (B) Copper (C) Chromium (D) Silicon

Last Answer : Option B

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

.In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. A higher coefficient of thermal expansion and a lower crashing strength C. A lower coefficient of thermal expansion and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Description : .In regard to the glass of quartz particles of filling restorative resin; the microfill resins tend to have, A. A higher coefficient of thermal expansion and a higher crashing strength B. ... and a higher crashing strength D. A lower coefficient of thermal expansion and a lower crashing strength

Last Answer : B. A higher coefficient of thermal expansion and a lower crashing strength

Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Description : Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Last Answer : a) A reduced resistance to corrosion

The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength(C) Account for the uneven expansion of shell and tube bundles(D) Facilitate increase of shell length, if needed

Description : The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength (C) Account for the uneven expansion of shell and tube bundles (D) Facilitate increase of shell length, if needed

Last Answer : (C) Account for the uneven expansion of shell and tube bundles

Pick up the correct statement from the following: (A) Water with hardness upto 75 ppm is considered soft (B) Water with hardness more than 200 ppm is considered hard (C) Water needed for laundries should contain hardness less than 75 ppm (D) All the above

Description : Pick up the correct statement from the following:  (A) Water with hardness upto 75 ppm is considered soft  (B) Water with hardness more than 200 ppm is considered hard  (C) Water needed for laundries should contain hardness less than 75 ppm  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil is the material in a relatively thin surface zone within which roots occur, and rest of the crust is termed as rock irrespective of hardness (C) To an engineer, soil is the unaggregated and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Description : Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil ... and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Last Answer : (D) All the above

Assertion A : Pure lime takes a long time to develop adequate strength. Reason R : Pure lime has slow hardening characteristics. Select your answer according to the coding system given below: (A) Both A and R is true and R is correct explanation of A (B) Both A and R is true and R is not a correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Pure lime takes a long time to develop adequate strength. Reason R : Pure lime has slow hardening characteristics. Select your answer according to the coding system given below: (A) Both A and R is true ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

Which of the following restoration material’s strength is not effected by pins: A. Amalgam B. Composite resin

Description : Which of the following restoration material’s strength is not effected by pins: A. Amalgam B. Composite resin

Last Answer : B. Composite resin

Is liquid tree resin hardening into amber physical or chemical change?

Description : Is liquid tree resin hardening into amber physical or chemical change?

Last Answer : Physical... chemically, it's still the same substance,

Is liquid tree resin hardening into amber physical or chemical change?

Description : Is liquid tree resin hardening into amber physical or chemical change?

Last Answer : Physical... chemically, it's still the same substance,

Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of an inert gas at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Description : Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of ... at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Last Answer : (D) None of thes

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Pick out the wrong statement. (A) ****, *** & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate of chemical reaction is independent of the concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Description : Pick out the wrong statement. (A) Wine, rum & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate ... concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Last Answer : (D) Total sugar content in molasses is about 10%

Sizing material is incorporated in paper to(A) Impart resistance to penetration by liquids(B) Increase its thickness(C) Increase its flexibility & opacity(D) Increase its brightness

Description : Sizing material is incorporated in paper to (A) Impart resistance to penetration by liquids (B) Increase its thickness (C) Increase its flexibility & opacity (D) Increase its brightness

Last Answer : (A) Impart resistance to penetration by liquids

Conditioners like finely divided peat are added to the fertiliser to (A) Counteract burning (B) Avoid caking & hardening (C) Produce bulk (D) Increase its solubility

Description : Conditioners like finely divided peat are added to the fertiliser to (A) Counteract burning (B) Avoid caking & hardening (C) Produce bulk (D) Increase its solubility

Last Answer : (B) Avoid caking & hardening

Mercaptans are added to liquefied petroleum gas (LPG) to (A) Reduce its cost (B) Narrow down its explosion limit (C) Assist in checking its leakage from cylinder (D) Increase its calorific value

Description : Mercaptans are added to liquefied petroleum gas (LPG) to (A) Reduce its cost (B) Narrow down its explosion limit (C) Assist in checking its leakage from cylinder (D) Increase its calorific value

Last Answer : (C) Assist in checking its leakage from cylinder

Case hardening of a material is (A) Followed by tempering or carburising (B) Preceded by its tempering (C) Done to get a soft ductile interior with a very hard surface (D) Carried out to get extreme hardness in its core

Description : Case hardening of a material is (A) Followed by tempering or carburising (B) Preceded by its tempering (C) Done to get a soft ductile interior with a very hard surface (D) Carried out to get extreme hardness in its core

Last Answer : (D) Carried out to get extreme hardness in its core

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

Pick up the incorrect statement from the following: (A) Tricalcium silicate (C3S) hydrates rapidly (B) Tricalcium silicate (C3S) generates more heat of hydration (C) Tricalcium silicate (C3S) develops early strength (D) Tricalcium silicate (C3S) has more resistance to sulphate attac

Description : Pick up the incorrect statement from the following: (A) Tricalcium silicate (C3S) hydrates rapidly (B) Tricalcium silicate (C3S) generates more heat of hydration (C) Tricalcium silicate (C3S) develops early strength (D) Tricalcium silicate (C3S) has more resistance to sulphate attack

Last Answer : Answer: Option D

Antioxidants are added in petrol to (A) Impart colour to it, for easy identification (B) Minimise the gum formation (C) Prevent icing of the carburettor (D) Prevent the lead build up in engines

Description : Antioxidants are added in petrol to (A) Impart colour to it, for easy identification (B) Minimise the gum formation (C) Prevent icing of the carburettor (D) Prevent the lead build up in engines

Last Answer : (B) Minimise the gum formation

________ cannot increase the fatigue strength of a material. (A) Grain refining (B) Grain coarsening (C) Surface hardening (D) Shot peening

Description : ________ cannot increase the fatigue strength of a material. (A) Grain refining (B) Grain coarsening (C) Surface hardening (D) Shot peening

Last Answer : (B) Grain coarsening

Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (B) (i) - Fe/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3

Which one of the following statements regarding a catalyst is not correct? A An enzyme is a catalyst that only binds certain substrates. B An enzyme is a protein that is a highly efficient catalyst for one or more chemical reactions in a living system. C Catalysts increase the rate of a reaction by altering the mechanism, thereby increasing the activation energy. D Catalysts do not alter the equilibrium constant for a chemical reaction.

Description : Which one of the following statements regarding a catalyst is not correct? A An enzyme is a catalyst that only binds certain substrates. B An enzyme is a protein that is a highly ... increasing the activation energy. D Catalysts do not alter the equilibrium constant for a chemical reaction.

Last Answer : C Catalysts increase the rate of a reaction by altering the mechanism, thereby increasing the activation energy.

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C