Three basic raw materials which are needed in large quantities for production of steel are (A) Iron ore, coal and sulphur (B) Iron ore, carbon and sulphur (C) Iron ore, coal and lime stone (D) Iron ore, carbon and lime stone

Three basic raw materials which are needed in large quantities for production of steel are
(A) Iron ore, coal and sulphur
(B) Iron ore, carbon and sulphur
(C) Iron ore, coal and lime stone
(D) Iron ore, carbon and lime stone
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel for structural purpose as it is more homogenous (C) Basic Bessemer process is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Description : Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel ... is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Last Answer : Answer: Option D

If the ore impurities is (A) Clay, lime stone is used as flux (B) Lime stone, clay is used as flux (C) Quartz, lime stone and argillaceous iron ores are used as flux (D) All the above

Description : If the ore impurities is (A) Clay, lime stone is used as flux (B) Lime stone, clay is used as flux (C) Quartz, lime stone and argillaceous iron ores are used as flux (D) All the above

Last Answer : Answer: Option D

If the iron ore contains clay as an impurity, the flux added during calcination, is (A) Clay (B) Lime stone (C) Argillaceous iron ore (D) All the above

Description : If the iron ore contains clay as an impurity, the flux added during calcination, is (A) Clay (B) Lime stone (C) Argillaceous iron ore (D) All the above

Last Answer : Answer: Option B

The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C

'Pneumoconiosis' is a disease caused by the inhalation of __________ dust. (A) Coal (B) Uranium ore (C) Iron ore (D) Lime

Description : 'Pneumoconiosis' is a disease caused by the inhalation of __________ dust. (A) Coal (B) Uranium ore (C) Iron ore (D) Lime

Last Answer : (A) Coal

Match the following: A. Jharia 1. Iron Ore B. Neyveli 2. Sulphur C. Singhbhum 3.Gold D. Hutti 4. Coal 5. Lignite A B C D (a) 4 5 2 1 (b) 4 5 1 3 (c) 3 4 1 2 (d) 5 1 2 3

Description : Match the following: A. Jharia 1. Iron Ore B. Neyveli 2. Sulphur C. Singhbhum 3.Gold D. Hutti 4. Coal 5. Lignite A B C D (a) 4 5 2 1 (b) 4 5 1 3 (c) 3 4 1 2 (d) 5 1 2 3

Last Answer : Ans: (b)

Pick up the correct statement from the following: (A) In basic Bessemer process, the steel heats the converter (B) In open-hearth process, the furnace heats the steel (C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore (D) All the above

Description : Pick up the correct statement from the following: (A) In basic Bessemer process, the steel heats the converter (B) In open-hearth process, the furnace heats the steel (C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore (D) All the above

Last Answer : Answer: Option D

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Description : Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Last Answer : (d) All the above

Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite

Description : Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite

Last Answer : ANSWER: W -- COKE

Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Pick up the correct statement from the following: (A) Roasting is not necessary if iron ore is an oxide (B) Impurities float on the molten iron as slag (C) The slag contains lime about 45% (D) All the above

Description : Pick up the correct statement from the following: (A) Roasting is not necessary if iron ore is an oxide (B) Impurities float on the molten iron as slag (C) The slag contains lime about 45% (D) All the above

Last Answer : Answer: Option D

Which of the following gradients exerts maximum influence on properties of steel? (A) Iron (B) Carbon (C) Manganese (D) Sulphur

Description : Which of the following gradients exerts maximum influence on properties of steel? (A) Iron (B) Carbon (C) Manganese (D) Sulphur

Last Answer : Answer: Option B

Apart from carbon dioxide and water, name four other raw materials which are needed by the plants. -Science

Description : Apart from carbon dioxide and water, name four other raw materials which are needed by the plants. -Science

Last Answer : Nitrogen, phosphorus, iron and magnesium.

(a) 1. Name the private sector iron and steel plant of India. [2] 2. From where does it get its supply of: 1. Iron ore 2. Manganese 3. Coal? -Geography

Description : (a) 1. Name the private sector iron and steel plant of India. [2] 2. From where does it get its supply of: 1. Iron ore 2. Manganese 3. Coal? -Geography

Last Answer : 1. Tata Iron and Steel Industry, Jamshedpur. 2. 1. Iron Ore: Singhbhum, Mayurbhanj. 2. Manganese: Noamundi. 3. Coal: Jharia.

With reference to the Bokaro Steel Plant, from where does it get its (i) coal (ii) iron ore (iii) water supply ? -Geography

Description : With reference to the Bokaro Steel Plant, from where does it get its (i) coal (ii) iron ore (iii) water supply ? -Geography

Last Answer : (i) Coal from Bokaro and Jharia coal fields. (ii) Iron ore from Bonaigarh, Kiriburu and Noamundi in Orissa. (iii) Water supply from River Damodar.

(i) Mention two characteristics of a mini steel plant. (ii) From where does the integrated steel plant at Jamshedpur get its iron ore and coal ? -Geography

Description : (i) Mention two characteristics of a mini steel plant. (ii) From where does the integrated steel plant at Jamshedpur get its iron ore and coal ? -Geography

Last Answer : (i) Two characteristics of a mini steel plant are : 1. They use cheaply available scrap iron. 2. They use electric furnaces therefore cause no pollution. (ii) Jamshedpur plant get its iron ore from Singhbhum and Mayurbhanj. It get its coal from Jharia and Raniganj.

The commodity which accounts for the maximum volume of goods transported by the railways in India is (a) iron and steel (b) coal (c) mineral oil (d) metallic ores (other than iron ore)

Description : The commodity which accounts for the maximum volume of goods transported by the railways in India is (a) iron and steel (b) coal (c) mineral oil (d) metallic ores (other than iron ore)

Last Answer : Ans: (b)

The Rourkela steel plant obtains: 1. hydel power from the Hirakud dam 2. coking coal from Jharia coalfields 3. iron ore from Baba Budan hills (a) I, II and III (b) I and II (c) I and III (d) II and III

Description : The Rourkela steel plant obtains: 1. hydel power from the Hirakud dam 2. coking coal from Jharia coalfields 3. iron ore from Baba Budan hills (a) I, II and III (b) I and II (c) I and III (d) II and III

Last Answer : Ans: (d)

Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Last Answer : Answer: Option A

Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Description : Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Last Answer : Answer: Option B

Which of the following statements are true with respect to iron ore? 2. Limestone and coal are important for smelting iron ore 3. More than 20% of the world iron ore deposits are in India 4. Odisha and Jharkhand top in the production of iron ore 5. Iran is the largest buyer of Indian iron ore (a) I, II and III (b) II and III (c) III and IV (d) II, III and IV

Description : Which of the following statements are true with respect to iron ore? 2. Limestone and coal are important for smelting iron ore 3. More than 20% of the world iron ore deposits are in India 4. Odisha and Jharkhand top in the ... a) I, II and III (b) II and III (c) III and IV (d) II, III and IV

Last Answer : Ans: (a)

Ankaleshwar in India is known for the production of: [NDA 2002] (a) bauxite (b) coal (c) iron ore (d) petroleum

Description : Ankaleshwar in India is known for the production of: [NDA 2002] (a) bauxite (b) coal (c) iron ore (d) petroleum

Last Answer : Ans: (d)

Which of the following is the classification of Industries on the basis of raw-materials? (1) Small Scale — Large scale (2) Primary and Secondary (3) Basic and Consumer (4) Agro-based and Mineral based

Description : Which of the following is the classification of Industries on the basis of raw-materials? (1) Small Scale — Large scale (2) Primary and Secondary (3) Basic and Consumer (4) Agro-based and Mineral based

Last Answer : (4) Agro-based and Mineral based Explanation: Industries are classified on the bases of source of raw material. There are two types of industries agro based and mineral based industries ... based industries are iron and steel, cement, aluminum, machine tools, and petrochemicals producing industries

Which of the following is the classification of Industries on the basis of raw-materials ? (1) Small Scale – Large scale (2) Primary and Secondary (3) Basic and Consumer (4) Agro-based and Mineral based

Description : Which of the following is the classification of Industries on the basis of raw-materials ? (1) Small Scale – Large scale (2) Primary and Secondary (3) Basic and Consumer (4) Agro-based and Mineral based

Last Answer : Agro-based and Mineral based

Explain how the following have played a part in the location of the Tata Iron and Steel Company: (i) Raw materials. (ii) Transport. -Geography

Description : Explain how the following have played a part in the location of the Tata Iron and Steel Company: (i) Raw materials. (ii) Transport. -Geography

Last Answer : The Tata Iron and Steel Co. The Iron and Steel Industry is primarily a rawmaterial oriented industry using cheap and weight loosing raw materials. (i) Raw Materials : High grade haematite ... enjoys good transport facilities. Kolkata located at a distance of 240 kms, provides port facilities.

The Vindhyan system of rocks is important for the production of [CDS 2011] (a) precious stones and building materials (b) iron ore and manganese (c) bauxite and mica (d) copper and uranium

Description : The Vindhyan system of rocks is important for the production of [CDS 2011] (a) precious stones and building materials (b) iron ore and manganese (c) bauxite and mica (d) copper and uranium

Last Answer : Ans: (a)

The cost producing iron in India is considerably lower than in other countries because of (1) low wage of miners (2) large supply of iron ore (3) large supply of coal (4) coal and iron ore are found in the same area

Description : The cost producing iron in India is considerably lower than in other countries because of (1) low wage of miners (2) large supply of iron ore (3) large supply of coal (4) coal and iron ore are found in the same area

Last Answer : (4) coal and iron ore are found in the same area Explanation: Brazil, India, South Africa and China are highly competitive steel production locations. Brazil has vast reserves of high quality iron ... Bengal, Bihar, Orissa, and Madhya Pradesh, has been the natural nerve-centre of this industry.

Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Description : Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Last Answer : ANSWER: W -- LIMESTONE AND CARBON

Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Description : Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Last Answer : A)major equipment

In the genetic disorder of cystinuria, the patient excretes large quantities of cystine in their urine and its low solubility causes crystalline cystine to precipitate as stones in kidneys. The remedy involves ingesting Na HCO3. Reaction of this treatment is (A) NaHCO2 combines with cystine (B) NaHCO3 raises the pH above the isoelectric point of cystine (C) NaHCO3 prevents stone formation by hydrolysis of cystine to cysteine (D) None of these

Description : In the genetic disorder of cystinuria, the patient excretes large quantities of cystine in their urine and its low solubility causes crystalline cystine to precipitate as stones in kidneys. The remedy ... C) NaHCO3 prevents stone formation by hydrolysis of cystine to cysteine (D) None of these

Last Answer : Answer : C

When the ore haematite is burnt in air with coke around `2000 K` along with lime, the process not only produces steel but also produces a silicate sla

Description : When the ore haematite is burnt in air with coke around `2000 K` along with lime, the process not only produces steel but also produces a silicate sla

Last Answer : When the ore haematite is burnt in air with coke around `2000 K` along with lime, the process not only produces ... 3)` C. `SiO_(2)` D. `CaCO_(3)`

Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Description : Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Last Answer : (C) Water

Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Last Answer : (1) sand, soda, limestone Explanation: Quartz sand (silica) is the main raw material in commercial glass production. While fused quartz (primarily composed of SiO2) is used for some special ... over 1200 degree C (2192 degree F). Normally, other substances are added to simplify processing.

Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda 

Last Answer : sand, soda, limestone

Which of the following if present in iron ore, enhances its value? (A) Alumina (B) Alkali oxide (C) Lime & Magnesia (D) None of these

Description : Which of the following if present in iron ore, enhances its value? (A) Alumina (B) Alkali oxide (C) Lime & Magnesia (D) None of these

Last Answer : C) Lime & Magnesia

Which one of the following is used in large quantities in Cement Industry? (1) Gypsum (2) Limestone (3) Coal (4) Clay

Description : Which one of the following is used in large quantities in Cement Industry? (1) Gypsum (2) Limestone (3) Coal (4) Clay

Last Answer : (2) Limestone Explanation: Limestone, as used by the minerals industry, is any rock composed mostly of calcium carbonate (CaCO3). Limestone is used to produce Portland cement, as aggregate ... products, making it a truly versatile commodity. Portland cement is essential to the building industry.

One of the three groups of industrial products includes materials and parts. Which is not one of the material parts? a. farm products such as wheat b. natural products such as iron ore natural products such as iron ore c. nonraw materials d. petroleum

Description : One of the three groups of industrial products includes materials and parts. Which is not one of the material parts? a. farm products such as wheat b. natural products such as iron ore natural products such as iron ore c. nonraw materials d. petroleum

Last Answer : c. nonraw materials

In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration

Description : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration

Last Answer : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration ... C. `8:1:4` D. `1:4:8`

What happens when lime stone is not added during the extraction of iron?

Description : What happens when lime stone is not added during the extraction of iron?

Last Answer : If limestone is not added to charge during the extraction of iron, the blast furnace will get blocked.

State the role of lime stone in the extraction of iron from haematite. Or Why is lime stone added during the extraction of iron?

Description : State the role of lime stone in the extraction of iron from haematite. Or Why is lime stone added during the extraction of iron?

Last Answer : Limestone reacts with the sand present as impurity in the ore forming calcium silicate which is taken out of the blast furnace as slag.

By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distributi9on activities except 1. inventory planning 2. transportation 3. materials handling 4. unit pricing 5. communication

Description : By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distributi9on activities except 1. inventory planning 2. transportation 3. materials handling 4. unit pricing 5. communication

Last Answer : unit pricing

By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distribution activities except A)inventory planning. B)transportation. C)materials handling. D)unit pricing. E)communication.

Description : By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distribution activities except A)inventory planning. B)transportation. C)materials handling. D)unit pricing. E)communication.

Last Answer : D)unit pricing.

Name any two raw materials derived from coal. -SST 10th

Description : Name any two raw materials derived from coal. -SST 10th

Last Answer : Coal itself is a raw material for many industries but energy derived from it serves as a raw material for generating thermal electricity. It also provides fuel to supply heat or light or both.

Which statement BEST describes the economy of the United Kingdom (U.K.) Question 14 options The U.K. must import all of its oil coal and natural gas. The U.K. must import many raw materials used in ma?

Description : Which statement BEST describes the economy of the United Kingdom (U.K.) Question 14 options The U.K. must import all of its oil coal and natural gas. The U.K. must import many raw materials used in ma?

Last Answer : Which statement BEST describes the economy of the United Kingdom(U.K.)?Question 14 options:The U.K. must import all of its oil,coal, and natural gas.The U.K. must import many raw materials ... ofcoal and natural gas.The U.K.'s geography provides it with all of the naturalresources it needs.

production of rings - raw or cut stone?

Description : hello, I want to buy a friend who makes rings, some minerals ... is it better to buy raw mineral or ground / polished? and what size? thank you so much

Last Answer : If he has the opportunity to grind the trunks and if he can, he will be better raw. He'll grind what he needs. If he doesn't have that option, he'll be better off. Size depending on what it will be used for.

Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Description : Iron ore may contain (A) Carbon (B) Silicon (C) Phosphorus and manganese (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Blisters in the finished wrought iron, are caused due to the reaction between oxide of iron and carbon (B) The edges of a finished wrought iron are rough due to red shortage (C) Pig iron (charcoal) is manufactured from magnetic ore (Fe3O4) (D) All the above

Description : Pick up the correct statement from the following: (A) Blisters in the finished wrought iron, are caused due to the reaction between oxide of iron and carbon (B) The edges of a finished wrought iron ... shortage (C) Pig iron (charcoal) is manufactured from magnetic ore (Fe3O4) (D) All the above

Last Answer : Answer: Option D

Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Description : Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Last Answer : Answer: Option D