Description : For high grade instruments the steel preferred to, is (A) Cast steel (B) Bessemer steel (C) Mild steel (D) Whitworth compressed steel
Last Answer : Answer: Option A
Description : Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel
Last Answer : Answer: Option D
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron
Last Answer : (B) Cast iron
Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel
Last Answer : (C) Refractory blocks
Description : The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel
Last Answer : (C) Masonry well
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel
Last Answer : (C) Karbate
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : The variety of pig iron used for the manufacture of steel by Bessemer process, is (A) Bessemer pig (B) Grey pig (C) White forge pig (D) Mottled pig
Description : Cast steel is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process
Last Answer : Answer: Option B
Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel
Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron
Last Answer : (B) Stainless steel
Description : The steel generally used in R.C.C. work, is (A) Stainless (B) Mild steel (C) High carbon steel (D) High tension steel
Description : The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron
Description : The variety of pig iron used for manufacture of wrought iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White forge pig (D) Mottled pig
Last Answer : Answer: Option C
Description : Hammers and railway rails are normally made of (A) Mild steel (B) Dead mild steel (C) Medium carbon steel (D) High carbon stee
Last Answer : (D) High carbon stee
Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)
Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel
Description : For the manufacture of stainless steel, steel is mixed with (A) Chromium (B) Nickel (C) Tungsten (D) None of these
Description : The best material for the core of a transformer is – (1) stainless steel (2) mild steel (3) hard steel (4) soft iron
Last Answer : (4) soft iron Explanation: Iron has a very large magnetic response: it greatly amplifies an applied magnetic field. The transformer's ability to transfer energy depends on the strength of the magnetic ... field is amplified. The input energy can then be lower while still having the same effect.
Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel
Last Answer : (B) Lead
Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility
Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon stee
Last Answer : (C) Carbides
Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)
Last Answer : (A) Molybdenum stainless steel
Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper
Description : Gas holder of a gobar (cow-dung) gas plant is made of (A) Molybdenum stainless steel (B) Tin (C) Mild steel (D) Aluminium
Last Answer : (C) Mild steel
Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel
Last Answer : (C) High speed steel
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon steel
Last Answer : (A) Mild steel
Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel
Last Answer : Option C
Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel
Last Answer : Option D
Description : The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above
Last Answer : (c) mild steel
Description : The best material for the core of a transformer is (1) stainless steel (2) mild steel (3) hard steel (4) soft iron
Last Answer : soft iron
Description : Softer variety of steel may be obtained by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth
Description : The steel which contains fissures and cavities, is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process
Description : Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel ... is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel
Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process
Description : The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process
Description : Pick up the correct statement from the following: (A) In basic Bessemer process, the steel heats the converter (B) In open-hearth process, the furnace heats the steel (C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore (D) All the above
Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions
Last Answer : d. Rope and wood
Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron
Last Answer : (C) Wrought iron
Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron
Last Answer : (B) Pig iron
Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel
Last Answer : (D) High carbon steel
Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks
Last Answer : (B) Mild steel
Description : In SO3 absorber (Contact Process), packing material used is of (A) Cast iron (B) Chemical stoneware (C) Karbate (D) Mild steel
Last Answer : (B) Chemical stoneware
Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel
Last Answer : d Soft centre steel