Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)
Last Answer : (C) Reinforced concrete lined with lead
Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper
Last Answer : (A) Molybdenum stainless steel
Description : Carbon tetrachloride can be stored in a storage vessel made of (A) High silicon iron (14% Si) (B) Tin (C) Stainless steel (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Most suitable material for high pressure vessel operating at 500 atm. and 500° C is (A) Molybdenum stainless steel (B) 18/8 stainless steel (C) Mild steel (D) High silicon iron (14% Si)
Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron
Last Answer : (B) Pig iron
Description : Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)
Last Answer : (D) Hydrochloric acid (concentrated)
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Urea autoclave is made of (A) Cast iron (B) Refractory blocks (C) Stainless steel (D) Lead lined steel
Last Answer : (C) Stainless steel
Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel
Last Answer : (C) Refractory blocks
Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain
Last Answer : (B) Glass lined steel
Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium
Last Answer : (A) Stainless steel or glass lined steel
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks
Last Answer : (A) Acidic refractory
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks
Last Answer : (D) Lead or acid-proof bricks
Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these
Last Answer : (C) Packed steel tower lined with acid proof bricks
Description : Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers
Last Answer : (D) Cast iron containers
Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper
Last Answer : (B) Stainless steel
Description : Refractory bricks having high thermal conductivity is desirable, when it is to be used in the (A) L.D. converter (B) Blast furnace (C) Rotary kiln (D) Recuperator
Last Answer : (D) Recuperator
Description : Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace
Last Answer : (C) Tunnel kiln
Description : Material of construction of pipe generally used for conveying water in India is (A) Stainless steel (B) Cast iron (C) Wrought iron (D) Lead lined steel
Last Answer : (B) Cast iron
Description : Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined
Last Answer : (A) Carbon steel-brick lined
Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel
Last Answer : (A) Cast iron
Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel
Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood
Last Answer : (C) Steel or cement-brick lined
Description : Spray dryer for evaporating milk to produce milk powder is made of (A) Lead lined steel (B) Stainless steel (C) Aluminium (D) Cast iron
Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron
Last Answer : (B) Stainless steel or glass lined vessel
Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined
Last Answer : (C) Stainless steel-glass lined
Description : Paper industry employs __________ driers. (A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed
Last Answer : (A) Cylinder
Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these
Last Answer : (A) PTFE and porcelain
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron
Description : Hydrochloric acid absorber in made of (A) Cast iron (B) Mild steel (C) Karbate (D) Stainless steel
Last Answer : (C) Karbate
Description : Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks
Last Answer : (A) Glass
Description : Light weight metallic alloy used in aircraft industry is (A) Aluminium (B) High silicon (14%) iron (C) Duralumin
Last Answer : (C) Duralumin
Description : Ceramic recuperators are generally made of (A) Silicon carbide (B) Calcium carbide (C) Fireclay bricks (D) High alumina bricks
Last Answer : (A) Silicon carbide
Description : Aqueous nitric acid is stored in (A) Steel drum (B) Stainless steel vessel (C) Cast iron vessel lined with acid-proof masonry brick (D) Cast iron vessel
Last Answer : (B) Stainless steel vessel
Description : Hydrochloric acid is stored in a __________vessel. (A) Lead lined steel (B) Rubber lined steel (C) Stainless steel (D) Cast iron
Last Answer : (B) Rubber lined steel
Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel
Last Answer : (A) High silicon iron, Kel-F and Teflon
Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel
Last Answer : (D) High carbon steel
Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel
Last Answer : (C) Mild steel
Last Answer : Option C
Description : Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze
Last Answer : (D) Coke breeze
Description : Which of the following has the minimum absorptivity? (A) Aluminium foil (B) Coal dust (C) Refractory bricks (D) Iron plates
Last Answer : (A) Aluminium foil
Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel
Last Answer : d Soft centre steel
Description : The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel
Last Answer : Carbon steel
Description : The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.
Last Answer : d. cast iron.
Description : Share for use in sandy soils are made of A)chilled cast iron. B)cast iron C)mild steel. D)gun metal
Last Answer : Share for use in sandy soils are made of A)chilled cast iron. B)cast iron C)mild steel. D)gun metal
Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel
Last Answer : a. Soft centre steel