Description : . A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid. (A) Newtonian (B) Non-Newtonian (C) Ideal (D) Incompressible
Last Answer : (A) Newtonian
Description : Rubber latex is an example of a __________ fluid. (A) Pseudo plastic (B) Bingham plastic (C) Dilatent (D) Newtonian
Last Answer : (A) Pseudo plastic
Description : The ratio of average fluid velocity to the maximum velocity in case of laminar flow of a Newtonian fluid in a circular pipe is (A) 0.5 (B) 1 (C) 2 (D) 0.66
Last Answer : (A) 0.5
Description : Sewage sludge is an example of the __________ fluid. (A) Bingham plastic (B) Newtonian (C) Pseudo plastic (D) Dilatent
Last Answer : (A) Bingham plastic
Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows
Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5
Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids
Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids
Description : The fluid in which the shearing stress within it is proportional to the velocity gradient across the sheared section, is called a __________ fluid. (A) Bingham (B) Newtonian (C) Perfect (D) None of these
Last Answer : (B) Newtonian
Description : A fluid whose apparent viscosity increases with shear rate is termed as the __________ fluid. (A) Newtonian (B) Viscous (C) Dilatant (D) Non-viscous
Last Answer : (C) Dilatan
Description : Sewage sludge is __________ type of non-Newtonian fluid. (A) Dilatant (B) Bingham plastic (C) Pseudo plastic (D) None of these
Last Answer : (B) Bingham plastic
Description : Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000
Last Answer : (B) 2100
Description : Power required for mixing Newtonian fluids is a function of the (A) Speed of impeller, diameter of impeller & viscosity (B) Density & viscosity of fluid only (C) Density of fluid, viscosity of fluid & impeller dia only (D) None of these
Last Answer : (D) None of these
Description : Non-colloidal solution is an example of the __________ fluid. (A) Non-Newtonian (B) Newtonian (C) Dilatent (D) Pseudo-plastic
Description : In power law, ζ = [A (du/dy) 2 + B] then the fluid is (A) Newtonian (B) Dilatant (C) Thixotropic (D) Rheopectic
Description : For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ
Last Answer : (B) 1/μ
Description : Rubber latex is an example of __________ fluid. (A) Dilatants (B) Newtonian (C) Pseudo plastic (D) Bingham plastic
Last Answer : (C) Pseudo plastic
Description : Pick out the correct statement. (A) Human blood is a Newtonian fluid (B) A Newtonian fluid obeys Newton's law of cooling (C) For a non-Newtonian fluid, a straight line passes through the origin in a plot between shear stress and shear gradien
Last Answer : (B) A Newtonian fluid obeys Newton's law of cooling
Description : A Newtonian fluid is that (A) Which follows Newton's law of motion (B) Which needs a minimum shear, before it starts deforming (C) For which shear & deformation are related as T = µ (∂u/∂y) (D) None of these
Last Answer : (C) For which shear & deformation are related as T = µ (∂u/∂y)
Description : In case of turbulent flow of a Newtonian fluid in a straight pipe, the maximum velocity is equal to (where, Vavg = average fluid velocity) (A) Vavg (B) 1.2 Vavg (C) 1.5 Vavg (D) 1.8 Vavg
Last Answer : (B) 1.2 Vavg
Description : The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic
Last Answer : (B) Pseudo-plastic
Description : Quicksand is an example of a __________ fluid. (A) Bingham plastic (B) Dilatant (C) Newtonian (D) Pseudo plastic
Last Answer : (B) Dilatant
Description : Paper pulp is an example of __________ fluid. (A) Dilatant (B) Bingham plastic (C) Newtonian (D) Pseudo-plastic
Description : An ideal plastic substance indicates no deformation, when stressed upto yield stress, but behaves like a Newtonian fluid beyond yield stress. Which of the following is an ideal plastic? (A) Sewage sludge (B) Rubber latex (C) Blood (D) Sugar solution
Last Answer : (A) Sewage sludge
Description : The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian
Description : Pick out the correct statement pertaining to transition/ entrance length in fluid flow. (A) The length of entrance region of pipe, in which full development of fluid flow takes place such that velocity profile does not change ... pipe of diameter 'd' is equal to 50 D (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : For turbulent flow of Newtonian fluid in a circular cross-section pipe, the ratio of maximum to average fluid velocity is (A) 0.5 (B) 1 (C) 0.66 (D) < 0.5
Last Answer : (B) 1
Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear
Last Answer : (B) Parabolic
Description : The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian
Last Answer : (A) Dilatent
Description : Which of the following is a Newtonian fluid? (A) Rubber latex (B) Sewage sludge (C) Quicksand (D) Non-colloidal solution
Last Answer : (D) Non-colloidal solution
Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Last Answer : (A) Decreases
Description : A fluid is termed as the Newtonian fluid, when the shear stress is __________ the velocity gradient. (A) Independent of (B) Inversely proportional to (C) Directly proportional to (D) None of these
Last Answer : (C) Directly proportional to
Description : 16. The shear stress-strain graph for a Non-Newtonian fluid is a curve. A) Correct B) Incorrect
Last Answer : A
Description : A fluid whose viscosity does not change with the rate of deformation or shear strain is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Last Answer : Answer: Option C
Description : The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type
Last Answer : Answer: Option A
Description : A fluid having no viscosity is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Last Answer : Answer: Option B
Description : Water is a __________ fluid. (A) Real (B) Ideal (C) Newtonian (D) Non-Newtonian
Description : The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical
Description : A fluid which obeys the Newton's law of viscosity is termed as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Description : What is a good device to use for obtaining viscosity data for a non-Newtonian fluid?
Last Answer : Consider a rotational viscometer. It will measure the shear rate applied and the subsequent viscosity at the same time. You can also vary the temperature and time the stresses are applied ... shows that this product exhibits a marked shear thinning viscosity profile over the test conditions.
Description : The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”. a. Clausius Theorem b. Caloric Theory c. Joules Law d. Newton’s Law of cooling
Last Answer : Caloric Theory
Description : Work done in pushing a fluid across a boundary, Usually into or out of a system a. Flow Work b. Flow Energy c. Both a & b d. None of the above
Last Answer : Both a & b
Description : Archimedes principle states that a. when a body is inversed in a fluid, the fluid exerts a downward force on the body whose magnitude is equal to the weight of the displaced fluid b. ... fluid exerts a downward force on the body whose magnitude is lower than the weight of the displaced fluid.
Last Answer : when a body is inversed in a fluid, the fluid exerts a upward force on the body whose magnitude is equal to the weight of the displaced fluid.
Description : The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point. a. 222 psi b. 333 psi c. 444 psi d. 111 psi formula: Ef= pV
Last Answer : 111 psi
Description : A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2. a. 625 fpm b. 567 fpm c. 356 fpm d. None of the above
Last Answer : 625 fpm
Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s. a. 267 kg/s b. 378 kg/s c. 375 kg/s d. 456.5 kg/s m = Aν/V
Last Answer : 375 kg/s
Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k ) a. 543680 N/m2 b. 543.68 kPa (gauge) c. Both a & b d. None of the above
Description : A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid. A. 42.41 ft^3 B.44.35 ft^3 C.45.63 ft^3 D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4
Last Answer : 42.41 ft^3
Description : The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point a. 733.33 kPa b. 833.33 kPa c. 933.33 kPa d. 633.33 kPa
Last Answer : 733.33 kPa
Description : If any external pressure is applied to a confined fluid, the pressure will be increased at every point in the fluid by the amount of the external pressure is known as _________. a. Torricelli’s law b. Barometric law c. Newton’s Second law d. Pascal’s law
Last Answer : Pascal’s law
Description : A convection process in which an external device, such as a fan, is used to produce the fluid flow. a. Forced Convection b. External Convection c. Placid Convection d. Thermionic Convection
Last Answer : Forced Convection