Description : The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical
Last Answer : Answer: Option A
Description : A fluid whose viscosity does not change with the rate of deformation or shear strain is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Last Answer : Answer: Option C
Description : Pick out the correct statement. (A) Human blood is a Newtonian fluid (B) A Newtonian fluid obeys Newton's law of cooling (C) For a non-Newtonian fluid, a straight line passes through the origin in a plot between shear stress and shear gradien
Last Answer : (B) A Newtonian fluid obeys Newton's law of cooling
Description : The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type
Description : . A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid. (A) Newtonian (B) Non-Newtonian (C) Ideal (D) Incompressible
Last Answer : (A) Newtonian
Description : Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids
Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids
Description : A fluid is termed as the Newtonian fluid, when the shear stress is __________ the velocity gradient. (A) Independent of (B) Inversely proportional to (C) Directly proportional to (D) None of these
Last Answer : (C) Directly proportional to
Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending
Last Answer : [ C ] The strain at different points in the section will be same
Description : According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these
Last Answer : Answer: Option B
Description : Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid
Description : A fluid whose apparent viscosity increases with shear rate is termed as the __________ fluid. (A) Newtonian (B) Viscous (C) Dilatant (D) Non-viscous
Last Answer : (C) Dilatan
Description : A Newtonian fluid is that (A) Which follows Newton's law of motion (B) Which needs a minimum shear, before it starts deforming (C) For which shear & deformation are related as T = µ (∂u/∂y) (D) None of these
Last Answer : (C) For which shear & deformation are related as T = µ (∂u/∂y)
Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only
Last Answer : (a) 1, 2 & 3
Description : Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild ... , 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5
Last Answer : (c) 4, 1, 3, 5 and 2
Description : A fluid having no viscosity is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Description : Water is a __________ fluid. (A) Real (B) Ideal (C) Newtonian (D) Non-Newtonian
Description : A fluid which obeys the Newton's law of viscosity is termed as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Description : 03. A fluid whose viscosity changes with the rate of deformation or shear strain is known as NonNewtonian fluid. A) True B) False
Last Answer : A
Description : The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)
Last Answer : (D) Both (a) and (b)
Description : If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs the ratio of inner diameter to outer diameter, is 17/64 (fs/N) (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5
Last Answer : (C) 1/4
Description : Newton's law of viscosity is a relationship between (A) Pressure, velocity and temperature (B) Shear stress and rate of shear strain (C) Shear stress and velocity (D) Rate of shear strain and temperature
Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth
Last Answer : (a) Strain distribution being linear across the depth
Description : Which of the following theories of failure is most appropriate for a brittle material? (a) Maximum principal strain theory (b) Maximum principal stress theory (c) Maximum shear stress theory (d) Maximum strain energy theory
Last Answer : (b) Maximum principal stress theory
Description : The fluid in which the shearing stress within it is proportional to the velocity gradient across the sheared section, is called a __________ fluid. (A) Bingham (B) Newtonian (C) Perfect (D) None of these
Last Answer : (B) Newtonian
Description : An ideal plastic substance indicates no deformation, when stressed upto yield stress, but behaves like a Newtonian fluid beyond yield stress. Which of the following is an ideal plastic? (A) Sewage sludge (B) Rubber latex (C) Blood (D) Sugar solution
Last Answer : (A) Sewage sludge
Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only
Last Answer : (b) 1 & 3 only
Description : Stress strain curve of high tensile steel (A) Has a definite yield point (B) Does not show definite yield point but yield point is defined by 0.1% proof stress (C) Does not show definite yield ... proof stress (D) Does not show definite yield point but yield point is defined by 2% proof stress,
Description : The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy
Last Answer : [ B ] 0.75 fy
Description : The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75
Last Answer : [ C ] 0.67
Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola
Last Answer : [ B ] a rectangular parabolic curve
Description : Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression ... compression test is uniform (D) Unconfined compression test can be carried out on all types of soils
Last Answer : Answer: Option D
Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis
Description : Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable ... to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress
Description : In a reinforced concrete beam , the shear stress distribution above the neutral axis following a (a) A straight line (b) Circular curve (c) Parabolic curve (d) All the above
Last Answer : (c) Parabolic curve
Description : State Hooke’s law. Draw a labelled graph of tensile stress against tensile strain for a metal wire
Last Answer : State Hooke's law. Draw a labelled graph of tensile stress against tensile strain for a metal wire up ... the region in which Hooke's law is obeyed.
Description : Sewage sludge is __________ type of non-Newtonian fluid. (A) Dilatant (B) Bingham plastic (C) Pseudo plastic (D) None of these
Last Answer : (B) Bingham plastic
Description : Non-colloidal solution is an example of the __________ fluid. (A) Non-Newtonian (B) Newtonian (C) Dilatent (D) Pseudo-plastic
Description : The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian
Description : Which of the following is a Newtonian fluid? (A) Rubber latex (B) Sewage sludge (C) Quicksand (D) Non-colloidal solution
Last Answer : (D) Non-colloidal solution
Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Last Answer : (A) Decreases
Description : What is a good device to use for obtaining viscosity data for a non-Newtonian fluid?
Last Answer : Consider a rotational viscometer. It will measure the shear rate applied and the subsequent viscosity at the same time. You can also vary the temperature and time the stresses are applied ... shows that this product exhibits a marked shear thinning viscosity profile over the test conditions.
Description : In a static fluid (A) Resistance to shear stress is small (B) Fluid pressure is zero (C) Linear deformation is small (D) Only normal stresses can exist
Description : Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force
Description : A fluid in equilibrium can't sustain (A) Tensile stress (B) Compressive stress (C) Shear stress (D) Bending stress
Description : Pick out the correct statement pertaining to transition/ entrance length in fluid flow. (A) The length of entrance region of pipe, in which full development of fluid flow takes place such that velocity profile does not change ... pipe of diameter 'd' is equal to 50 D (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum shear stress theory (d) None
Last Answer : (d) None
Description : A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Shear Stress Theory (b) Secondly Maximum Shear Strain Energy Theory (c) Both (a) & (b) (d) None
Last Answer : (c) Both (a) & (b)