Description : A process in which heat energy is transferred by the flow of fluid. a. Convection b. Conduction c. Radiation d. Sublimation
Last Answer : Convection
Description : The flow of a fluid when heat is transferred by convection. a. placidity b. mass flow c. convection current d. heat transfer
Last Answer : convection current
Description : What refers to the transfer of energy between a solid surface and the adjacent fluid that is in motion? A. Conduction B. Convection C. Radiation D. Electrification
Description : The radiation emitted by a body as a result of its temperature. a. Blackbody Radiation b. Thermal Inversion c. Thermionic Inversion d. Thermal Radiation
Last Answer : Thermal Radiation
Description : What is defined as a process during which a fluid flows through a control volume steadily? A. Transient-flow process B. Steady and uniform process C. Uniform-flow process D. Steady-flow process
Last Answer : Steady-flow process
Description : A process by which heat is transferred through a material without a bulk movement of the material. a. Convection b. Conduction c. Radiation d. Emission
Last Answer : Conduction
Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Last Answer : Answer : a
Description : If any external pressure is applied to a confined fluid, the pressure will be increased at every point in the fluid by the amount of the external pressure is known as _________. a. Torricelli’s law b. Barometric law c. Newton’s Second law d. Pascal’s law
Last Answer : Pascal’s law
Description : Work done in pushing a fluid across a boundary, Usually into or out of a system a. Flow Work b. Flow Energy c. Both a & b d. None of the above
Last Answer : Both a & b
Description : The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point. a. 222 psi b. 333 psi c. 444 psi d. 111 psi formula: Ef= pV
Last Answer : 111 psi
Description : A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2. a. 625 fpm b. 567 fpm c. 356 fpm d. None of the above
Last Answer : 625 fpm
Description : The flow energy of 150 L of a fluid passing a boundary to a system is 110 kJ. Determine the pressure at this point a. 733.33 kPa b. 833.33 kPa c. 933.33 kPa d. 633.33 kPa
Last Answer : 733.33 kPa
Description : What form of energy refers to those a system possesses as a whole with respect to some outside reference frame, such as potential and kinetic energies? A. Macroscopic form of energy B. Microscopic form of energy C. Internal energy D. External energy
Last Answer : Macroscopic form of energy
Description : It is the deposition of radiant energy as heat into an absorbing body. a. Radiation b. Ionization c. Convection d. Insolation
Last Answer : Insolation
Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage. a. Convection b. Conduction c. Radiation d. Sublimation
Last Answer : Sublimation
Description : How is heat transferred? A. By conduction B. By convection C. By radiation D. All of the above
Last Answer : All of the above
Description : Which of the following is the correct statement of the second law of thermodynamics? A. It is impossible to construct an engine working on a cyclic process, whose sole purpose is to convert heat energy ... energy, which can be obtained from a given quantity of heat energy. D. all of the above
Last Answer : Answer: D
Description : Mode of heat transfer in which the fluid moves under the influence of changes in fluid pressure produced by external work is called (A) Radiation (B) Natural convection (C) Forced convection (D) Conduction
Last Answer : (C) Forced convection
Description : According to Kelvin-Planck's statement of second law of thermodynamics, A. it is impossible to construct an engine working on a cyclic process, whose sole purpose is to convert heat energy into work B. it ... other than the transfer of heat from a cold body to a hot body D. none of the above
Last Answer : Answer: A
Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat? a. Adiabatic Saturation Process b. Dew point c. Adiabatic Ratio d. None of the above
Last Answer : Adiabatic Saturation Process
Description : The process of one substance mixing with another because of molecular motion is called _________. a. diffusion b. viscosity c. streamline flow d. solution
Last Answer : diffusion
Description : What remains constant during a steady-flow process? A. Mass B. Energy content of the control volume C. Temperature D. Mass and energy content of the control volume
Last Answer : Mass and energy content of the control volume
Description : The free expansion process is __________ non-flow process. A. reversible B. irreversible
Last Answer : Answer: B
Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about (a) 100 xlOO5 joules (b) lxlO5 joules (c) 10 xlO5 joules (d) 10 xlO5 kilo joules (e) 10xl04ki\ojoules.
Last Answer : Answer : c
Description : The index of compression n tends to reach ratio of specific heats y when (a) flow is uniform and steady (b) process is isentropic (c) process is isothermal (d) process ... specific heat does not change with temperature (e) process is isentropic and specific heat changes with temperature.
Last Answer : Answer : d
Description : The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and recondensed, then the liquid with the next higher boiling point is then evaporated and ... is called A. cracking B. carbonisation C. fractional distillation D. full distillation
Last Answer : Answer: C
Description : For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be (a) zero (b) minimum (d) maximum (d) infinity (e) there is no such criterion.
Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Last Answer : Answer : e
Description : Which of the following best describes both Stirling and Ericson engines? a. Internal combustion engine b. External combustion engine c. Diesel cycle d. Rankine cycle
Last Answer : External combustion engine
Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form. a. Dual Combustion Engine b. Internal Combustion Engine c. External Combustion Engine d. None of the above
Last Answer : Internal Combustion Engine
Description : _________ is the energy stored within a body or substance by virtue of the activity and configuration of its molecules. a. Internal Energy b. External Energy c. Kinetic Energy d. Potential Energy
Last Answer : Internal Energy
Description : The sum of energies of all the molecules in a system, energies that appear in several complex forms. a. External Energy b. Internal Energy c. Kinetic Energy d. None of the above
Description : What type of system energy is related to the molecular structure of a system? A. Macroscopic form of energy B. Microscopic form of energy C. Internal energy D. External energy
Last Answer : Microscopic form of energy
Description : According to Clausis statement of second law of thermodynamics (a) heat can't be transferred from low temperature source to high temperature source (b) heat can be transferred for low temperature to ... to high temperature source without the aid of external energy (e) all of the above.
Description : Addition of heat at constant pressure to a gas results in (a) raising its temperature (b) raising its pressure (c) raising its volume (d) raising its temperature and doing external work (e) doing external work.
Description : The theory that heat consisted of a fluid, which could be transferred from one body to another, but not “created” or “destroyed”. a. Clausius Theorem b. Caloric Theory c. Joules Law d. Newton’s Law of cooling
Last Answer : Caloric Theory
Description : Archimedes principle states that a. when a body is inversed in a fluid, the fluid exerts a downward force on the body whose magnitude is equal to the weight of the displaced fluid b. ... fluid exerts a downward force on the body whose magnitude is lower than the weight of the displaced fluid.
Last Answer : when a body is inversed in a fluid, the fluid exerts a upward force on the body whose magnitude is equal to the weight of the displaced fluid.
Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s. a. 267 kg/s b. 378 kg/s c. 375 kg/s d. 456.5 kg/s m = Aν/V
Last Answer : 375 kg/s
Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k ) a. 543680 N/m2 b. 543.68 kPa (gauge) c. Both a & b d. None of the above
Description : A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid. A. 42.41 ft^3 B.44.35 ft^3 C.45.63 ft^3 D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4
Last Answer : 42.41 ft^3
Description : What states that for a confined fluid, the pressure at a point has the same magnitude in all directions? A. Avogadro’s Law B. Amagat Law C. Pascal’s Law D. Bernoulli’s Theorem
Last Answer : Pascal’s Law
Description : _________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation. a. relative humidity b. triple point temperature c. dew point d. critical point
Last Answer : dew point
Description : One kg of carbon monoxide requires __________ kg of oxygen to produce 11/7 kg of carbon dioxide gas. A. All B. 4/7 C. 11/4 D. 9/7
Description : What device measures infrared radiation below? a. thermocouple b. thermopile c. thermodynamic device d. thermos
Last Answer : thermopile
Description : A device that violates the second law of thermodynamics is called a ______. A. Perpetual motion machine of the second kind B. Universal machine of the second kind C. Ambiguous machine of the second kind D. Unique machine of the second kind
Last Answer : Perpetual motion machine of the second kind
Description : A device that violates the first law of thermodynamics is called a _____. A. Perpetual-motion machine of the first kind B. Universal machine of the first kind C. Ambiguous machine of the first kind D. Unique machine of the first kind
Last Answer : Perpetual-motion machine of the first kind
Description : A device that violates either the first law of thermodynamics or the second law of thermodynamics is known as _____. A. Ambiguous machine B. Universal machine C. Perpetual-motion machine D. Unique machine
Last Answer : Perpetual-motion machine
Description : What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower- ... A. Kelvin-Planck statement B. Clausius statement C. Kelvin statement D. Rankine statement
Last Answer : Clausius statement
Description : What law states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lowertemperature body to a highertemperature body? A. ... B. First law of thermodynamics C. Second law of thermodynamics D. Third law of thermodynamics
Last Answer : Second law of thermodynamics
Description : What pressure measuring device consists of a coiled hollow tube that tends to straighten out when the tube is subjected to an internal pressure? A. Aneroid B. Manometer C. Bourdon pressure gage D. Barometer
Last Answer : Bourdon pressure gage