Name the type of cement from the following for canal linings: (A) Sulphate resisting cement (B) Rapid hardening cement (C) Quick setting cement (D) Pozzolana cement

Name the type of cement from the following for canal linings:
(A) Sulphate resisting cement
(B) Rapid hardening cement
(C) Quick setting cement
(D) Pozzolana cement
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Which of the following statements is correct? (a) Sulphate resisting cement is particularly used for canal lining. (b) Low heat cement should not be used for thin concrete structures. (c) Rapid hardening cement should not be used for massive concrete structures (d) All of the above

Description : Which of the following statements is correct? (a) Sulphate resisting cement is particularly used for canal lining. (b) Low heat cement should not be used for thin concrete structures. (c) Rapid hardening cement should not be used for massive concrete structures (d) All of the above

Last Answer : (d) All of the above

For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Description : For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Last Answer : Answer: Option A

Which of the following cements is suitable for use in massive concrete structures such as large dams? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements is suitable for use in massive concrete structures such as large dams? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B

Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B

Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Description : Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Last Answer : (c) High alumina cement

Quick setting cement is produced by adding (A) Less amount of gypsum in very fine powdered form (B) More amount of gypsum in very fine powdered form (C) Aluminium sulphate in very fine powdered form (D) Pozzolana in very fine powdered form

Description : Quick setting cement is produced by adding (A) Less amount of gypsum in very fine powdered form (B) More amount of gypsum in very fine powdered form (C) Aluminium sulphate in very fine powdered form (D) Pozzolana in very fine powdered form

Last Answer : Answer: Option C

The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Description : Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Last Answer : Answer: Option C

Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Description : Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Last Answer : d) Low heat cement*

Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Description : Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Last Answer : b) Portland Pozzolana cement *

You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option C

For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option D

For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ C ] Low heat cement

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

Hardening of cement occurs at (A) Rapid rate during the first few days and afterwards it continues to increase at a decreased rate (B) Slow rate during the first few days and afterwards it continues to increase at a rapid rate (C) Uniform rate throughout its age (D) None of these

Description : Hardening of cement occurs at (A) Rapid rate during the first few days and afterwards it continues to increase at a decreased rate (B) Slow rate during the first few days and afterwards it continues to increase at a rapid rate (C) Uniform rate throughout its age (D) None of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) High percentage of C3S and low percentage of C2S cause rapid hardening (B) High percentage of C3S and low percentage of C2S make the cement less resistive to chemical attack (C) Low percentage of C3S and high percentage of C2S contribute to slow hardening (D) All the above

Description : Pick up the correct statement from the following: (A) High percentage of C3S and low percentage of C2S cause rapid hardening (B) High percentage of C3S and low percentage of C2S make the cement ... ) Low percentage of C3S and high percentage of C2S contribute to slow hardening (D) All the above

Last Answer : Answer: Option D

For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option B

Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Description : Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Last Answer : Answer: Option A

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Description : Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Last Answer : (d) All of the above

High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Description : High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Last Answer : (d) All the above

For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ A ] Ordinary Portland cement

When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Description : When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Last Answer : [ B ] Greater

Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Description : Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Last Answer : Answer: Option C

Pozzolana (or surkhi) is used in lime (A) To impart hydraulicity (B) To prevent shrinkage (C) To decrease the cost of construction (D) To decrease the setting time

Description : Pozzolana (or surkhi) is used in lime (A) To impart hydraulicity (B) To prevent shrinkage (C) To decrease the cost of construction (D) To decrease the setting time

Last Answer : Answer: Option A

The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

Pozzolana cement is used with confidence for construction of (A) Dams (B) Massive foundations (C) R.C.C. structures (D) All the above

Description : Pozzolana cement is used with confidence for construction of (A) Dams (B) Massive foundations (C) R.C.C. structures (D) All the above

Last Answer : (D) All the above

Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Description : Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Last Answer : Answer: Option D

Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

Addition of pozzolana to cement causes (A) Reduction in permeability (B) Loss of heat of hydration (C) Reduction in bleeding (D) All the above

Description : Addition of pozzolana to cement causes (A) Reduction in permeability (B) Loss of heat of hydration (C) Reduction in bleeding (D) All the above

Last Answer : Answer: Option D

As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Last Answer : Answer: Option C

Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Description : Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Last Answer : Answer: Option D

Portland pozzolana cement possesses (A) Higher resistance to chemical attack (B) Lower heat of hydration (C) Lower shrinkage on drying (D) All the above

Description : Portland pozzolana cement possesses (A) Higher resistance to chemical attack (B) Lower heat of hydration (C) Lower shrinkage on drying (D) All the above

Last Answer : Answer: Option D

Addition of pozzolana to ordinary Portland cement increases (A) Bleeding (B) Shrinkage (C) Permeability (D) Heat of hydration

Description : Addition of pozzolana to ordinary Portland cement increases (A) Bleeding (B) Shrinkage (C) Permeability (D) Heat of hydration

Last Answer : Answer: Option B

The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Description : The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Last Answer : c) Hydration and hydrolysis of some constituent compounds of cement*

Describe setting and hardening of cement.

Description : Describe setting and hardening of cement.  

Last Answer : Hardening of cement Hardening is a process of crystallization. Crystals form (after a certain length of time which is known as the initial set time) and interlock with each other. Concrete ... and the time when the cement completely lost its plasticity and can resist certain definite pressure.

What is NOT characteristic of root canal filing materials (“obturation material”) A. Tacky adhesive to walls B. Radio opaque C. Not irritating D. Quick in setting

Description : What is NOT characteristic of root canal filing materials (“obturation material”) A. Tacky adhesive to walls B. Radio opaque C. Not irritating D. Quick in setting

Last Answer : D. Quick in setting

(3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of aluminium- and ironcontaining clinker phases and other compounds. The ratio of CaO to SiO2 shall not be less than 2.0. The magnesium oxide content (MgO) shall not exceed 5.0% by mass. Cement sets when mixed with water by way of a complex series of chemical reactions still only partly understood.

Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

The addition of gypsum to portland cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

Description : The addition of gypsum to portland cement helps in : (1) increasing the strength of cement (2) rapid setting of cement (3) preventing rapid setting of cement (4) reduction in the cost of cement

Last Answer : preventing rapid setting of cement

For concreting tunnel linings, transportation of concrete is done by (A) Pans (B) Wheel borrows (C) Containers (D) Pumps

Description : For concreting tunnel linings, transportation of concrete is done by (A) Pans (B) Wheel borrows (C) Containers (D) Pumps

Last Answer : (D) Pumps

Cement containing excess amount of lime – (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting

Description : Cement containing excess amount of lime – (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting

Last Answer : (1) cracks during setting Explanation: In cement almost entire amount of lime is present in combined state as calcium silicates and calcium aluminates. Cement containing excess amount of lime cracks during ... less amount of lime is weak in strength. Setting of cement is an exothermic process.

The obturating material of choice for primary teeth following complete pulpectomy is, A. Zn phosphate cement and formcresol combination paste B. Quick setting hydroxide cement C. Zinc oxide and eugenol cement D. Gutta-percha E. Polycarboxylate cement

Description : The obturating material of choice for primary teeth following complete pulpectomy is, A. Zn phosphate cement and formcresol combination paste B. Quick setting hydroxide cement C. Zinc oxide and eugenol cement D. Gutta-percha E. Polycarboxylate cement

Last Answer : C. Zinc oxide and eugenol cement

Cement containing excess amount of lime (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting

Description : Cement containing excess amount of lime (1) cracks during setting (2) becomes more strong (3) is slow setting (4) is quick setting 

Last Answer :  cracks during setting

The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

Admixtures which cause early setting and hardening of concrete are called (A) Workability admixtures (B) Accelerators (C) Retarders (D) Air entraining agents

Description : Admixtures which cause early setting and hardening of concrete are called (A) Workability admixtures (B) Accelerators (C) Retarders (D) Air entraining agents

Last Answer : Answer: Option B

The process of conversion of plastic concrete to solid stage is called [ A ] Hydration [ B ] Hardening [ C ] Setting [ D ] Curing

Description : The process of conversion of plastic concrete to solid stage is called [ A ] Hydration [ B ] Hardening [ C ] Setting [ D ] Curing

Last Answer : [ C ] Setting

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

During the process of hardening of cement, _______ will takes place [ A ] Bleeding [ B ] Segregation [ C ] Hydration [ D ] All the above

Description : During the process of hardening of cement, _______ will takes place [ A ] Bleeding [ B ] Segregation [ C ] Hydration [ D ] All the above

Last Answer : [ C ] Hydration