Pozzolana (or surkhi) is used in lime (A) To impart hydraulicity (B) To prevent shrinkage (C) To decrease the cost of construction (D) To decrease the setting time

Pozzolana (or surkhi) is used in lime
(A) To impart hydraulicity
(B) To prevent shrinkage
(C) To decrease the cost of construction
(D) To decrease the setting time
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The property by virtue of which lime sets under water, is known as (A) Slacking (B) Setting (C) Hydraulicity (D) Calcining

Description : The property by virtue of which lime sets under water, is known as (A) Slacking (B) Setting (C) Hydraulicity (D) Calcining

Last Answer : Answer: Option C

Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Description : Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Last Answer : Answer: Option D

Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Description : Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Last Answer : c) Prevent shrinkage and cracking

The main function of alumina in brick earth is (A) To impart plasticity (B) To make the brick durable (C) To prevent shrinkage (D) To make the brick impermeable

Description : The main function of alumina in brick earth is (A) To impart plasticity (B) To make the brick durable (C) To prevent shrinkage (D) To make the brick impermeable

Last Answer : Answer: Option A

The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Description : For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Last Answer : Answer: Option A

The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Description : The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Last Answer : Answer: Option C

As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Last Answer : Answer: Option C

Portland pozzolana cement possesses (A) Higher resistance to chemical attack (B) Lower heat of hydration (C) Lower shrinkage on drying (D) All the above

Description : Portland pozzolana cement possesses (A) Higher resistance to chemical attack (B) Lower heat of hydration (C) Lower shrinkage on drying (D) All the above

Last Answer : Answer: Option D

Addition of pozzolana to ordinary Portland cement increases (A) Bleeding (B) Shrinkage (C) Permeability (D) Heat of hydration

Description : Addition of pozzolana to ordinary Portland cement increases (A) Bleeding (B) Shrinkage (C) Permeability (D) Heat of hydration

Last Answer : Answer: Option B

The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : (B) (i) and (iv)

Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

Quick setting cement is produced by adding (A) Less amount of gypsum in very fine powdered form (B) More amount of gypsum in very fine powdered form (C) Aluminium sulphate in very fine powdered form (D) Pozzolana in very fine powdered form

Description : Quick setting cement is produced by adding (A) Less amount of gypsum in very fine powdered form (B) More amount of gypsum in very fine powdered form (C) Aluminium sulphate in very fine powdered form (D) Pozzolana in very fine powdered form

Last Answer : Answer: Option C

Name the type of cement from the following for canal linings: (A) Sulphate resisting cement (B) Rapid hardening cement (C) Quick setting cement (D) Pozzolana cement

Description : Name the type of cement from the following for canal linings: (A) Sulphate resisting cement (B) Rapid hardening cement (C) Quick setting cement (D) Pozzolana cement

Last Answer : Answer: Option A

Pozzolana cement is used with confidence for construction of (A) Dams (B) Massive foundations (C) R.C.C. structures (D) All the above

Description : Pozzolana cement is used with confidence for construction of (A) Dams (B) Massive foundations (C) R.C.C. structures (D) All the above

Last Answer : (D) All the above

In a mortar, the binding material is (A) Cement (B) Sand (C) Surkhi (D) Cinder

Description : In a mortar, the binding material is (A) Cement (B) Sand (C) Surkhi (D) Cinder

Last Answer : Answer: Option A

Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Description : Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Last Answer : a) Alumina*

Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Last Answer : Answer: Option D

In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Description : In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Last Answer : Answer: Option D

The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (C) Shrinkage limit

The object of curing is to (a) Prevent the loss of water by evaporation. (b) Reduce the shrinkage of concrete (c) Preserve the properties of concrete (d) All of these

Description : The object of curing is to (a) Prevent the loss of water by evaporation. (b) Reduce the shrinkage of concrete (c) Preserve the properties of concrete (d) All of these

Last Answer : (d) All of these

Minimum shear reinforcement is necessary to [ A ] Prevent brittle shear failure [ B ] Prevent failure due to shrinkage and thermal stresses [ C ] Hold the reinforcements in place while pouring concrete [ D ] All the above.

Description : Minimum shear reinforcement is necessary to [ A ] Prevent brittle shear failure [ B ] Prevent failure due to shrinkage and thermal stresses [ C ] Hold the reinforcements in place while pouring concrete [ D ] All the above.

Last Answer : [ D ] All the above.

swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

Antioxidants are added in petrol to (A) Impart colour to it, for easy identification (B) Minimise the gum formation (C) Prevent icing of the carburettor (D) Prevent the lead build up in engines

Description : Antioxidants are added in petrol to (A) Impart colour to it, for easy identification (B) Minimise the gum formation (C) Prevent icing of the carburettor (D) Prevent the lead build up in engines

Last Answer : (B) Minimise the gum formation

Shrinkage volume in cement setting does not depend upon the (A) Sand to cement ratio (B) Water to cement ratio (C) Ambient temperature fluctuation (D) Drying period

Description : Shrinkage volume in cement setting does not depend upon the (A) Sand to cement ratio (B) Water to cement ratio (C) Ambient temperature fluctuation (D) Drying period

Last Answer : (A) Sand to cement ratio

The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

Description : The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

Last Answer : (a) Make s the cement sound and provides strength to the cement.

Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Description : Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Last Answer : Answer: Option D

Addition of pozzolana to cement causes (A) Reduction in permeability (B) Loss of heat of hydration (C) Reduction in bleeding (D) All the above

Description : Addition of pozzolana to cement causes (A) Reduction in permeability (B) Loss of heat of hydration (C) Reduction in bleeding (D) All the above

Last Answer : Answer: Option D

Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Description : Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Last Answer : Answer: Option D

The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

Pozzolana is essentially a silicious material containing clay up to (a) 20% (b) 40% (c) 60% (d) 80%

Description : Pozzolana is essentially a silicious material containing clay up to (a) 20% (b) 40% (c) 60% (d) 80%

Last Answer : (d) 80%

Pick up the correct statement from the following: (A) The heating of a material to redness in contact with air, is known as calcination (B) The property of lime by which it sets or hardens in damp places having no free circulation of air is called setting (C) The product that remains after calcination of limestone, is called lime (D) All the above

Description : Pick up the correct statement from the following: (A) The heating of a material to redness in contact with air, is known as calcination (B) The property of lime by which it sets or hardens in ... (C) The product that remains after calcination of limestone, is called lime (D) All the above

Last Answer : Answer: Option D

Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Description : Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Last Answer : Answer: Option A

Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Description : Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Last Answer : Answer: Option C

The minimum water content at which a reduction in water content will not cause a decrease in the volume of a soil mass is known as a) Plastic limit b) Shrinkage limit* c) Liquid limit d) Consistency limit

Description : The minimum water content at which a reduction in water content will not cause a decrease in the volume of a soil mass is known as a) Plastic limit b) Shrinkage limit* c) Liquid limit d) Consistency limit

Last Answer : b) Shrinkage limit*

The binder normally used in flexible pavement construction is (A) Cement (B) Lime (C) Bitumen (D) None of the above

Description : The binder normally used in flexible pavement construction is (A) Cement (B) Lime (C) Bitumen (D) None of the above

Last Answer : Answer: Option C

Consider the following activities in a building construction: 1. Concreting of roof slabs 2. Brick-jelly lime concrete terracing 3. Erection of form work for slab 4. Construction of parapet wall in terrace The correct sequence of these activities is (A) 1, 3, 2, 4 (B) 3, 1, 4, 2 (C) 3, 1, 2, 4 (D) 1, 3, 4, 2

Description : Consider the following activities in a building construction: 1. Concreting of roof slabs 2. Brick-jelly lime concrete terracing 3. Erection of form work for slab 4. Construction of parapet wall in terrace The correct sequence of these ... (B) 3, 1, 4, 2 (C) 3, 1, 2, 4 (D) 1, 3, 4, 2

Last Answer : (C) 3, 1, 2, 4

For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Description : For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Last Answer : Answer: Option A

The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Description : The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Last Answer : Answer: Option A

Which of the following stone is best suited for construction of piers and abutments of a railway bridge? (A) Granite (B) Sand stone (C) Lime stone (D) Quartze

Description : Which of the following stone is best suited for construction of piers and abutments of a railway bridge? (A) Granite (B) Sand stone (C) Lime stone (D) Quartze

Last Answer : Answer: Option A

For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Description : For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Description : Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Last Answer : (C) Iron salts can be used over a limited range of pH values

The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Description : The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Description : Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Last Answer : Answer: Option D

The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above

Last Answer : (d) All of the above

Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Description : Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Last Answer : b) Portland Pozzolana cement *