The initial setting time of lime-pozzolana, is
(A) 30 minutes
(B) 60 minutes
(C) 90 minutes
(D) 120 minutes

1 Answer

Answer :

Answer: Option D

Related questions

Description : The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

Description : Initial setting time of cement for asbestos cement products should be not less than (A) 30 minutes (B) 50 minutes (C) 75 minutes (D) 90 minutes

Last Answer : Answer: Option D

Description : Pozzolana (or surkhi) is used in lime (A) To impart hydraulicity (B) To prevent shrinkage (C) To decrease the cost of construction (D) To decrease the setting time

Last Answer : Answer: Option A

Description : The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Last Answer : Answer: Option B

Description : At 160°C, it takes about minutes to kilt bacterial spores in a hot-air oven. a. 30 b. 60 c. 90 d. 120

Last Answer : d. 120

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

Description : According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Last Answer : (d) All the above.

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes

Last Answer : b)75 minutes

Description : For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Last Answer : Answer: Option A

Description : Quick setting cement is produced by adding (A) Less amount of gypsum in very fine powdered form (B) More amount of gypsum in very fine powdered form (C) Aluminium sulphate in very fine powdered form (D) Pozzolana in very fine powdered form

Last Answer : Answer: Option C

Description : Name the type of cement from the following for canal linings: (A) Sulphate resisting cement (B) Rapid hardening cement (C) Quick setting cement (D) Pozzolana cement

Last Answer : Answer: Option A

Description : Soundness test of cement determines (A) Quality of free lime (B) Ultimate strength (C) Durability (D) Initial setting

Last Answer : Answer: Option A

Description : The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Last Answer : Answer: Option A

Description : P and Q finished a work in 36 days; Q and R can do it in 60 days; P and R can do it in 45 days. In what time can P alone do it. a) 30 days b) 60 days c) 90 days d) 120 days

Last Answer : B (P+Q)'s 1 day work = 1/36 ---1 (Q+R)'s 1 day work = 1/60 ----2 (P+R)'s 1 day work = 1/45 ----3 Adding 1 & 2 & 3 we get 2(P+Q+R)'s 1 day work = 1/36 + 1/60+ 1/45 =(5+3+4)/180 = 12/ ... +R)'s 1 day work - (Q+R)'s 1 days work = 1/30 - 1/60 = 2-1/60 = 1/60 P alone can do the work in 60 days.

Description : After how many days of absence from Parliament without permission can a M.P. be disqualified? (1) 30 days (2) 60 days (3) 90 days (4) 120 days

Last Answer : (2) 60 days Explanation: The Constitution provides for disqualification of a Member of Parliament (MP) if he/she is absent continuously for 60 days from the Lok Sabha or the Rajya Sabha without permission.

Description : After how many days of absence from Parliament without permission can a M.P. be disqualified? (1) 30 days (2) 60 days (3) 90 days (4) 120 days

Last Answer : (2) 60 days Explanation: The Constitution provides for disqualification of a Member of Parliament (MP) if he/she is absent continuously for 60 days from the Lok Sabha or the Rajya Sabha without permission. Hence MPs submit leave applications when they are absent for a longer period of time.

Description : The distance between node and adjacent antinodes is 30 cm. The wavelength is - (1) 30 cm. (2) 90 cm. (3) 120 cm. (4) 60 cm.

Last Answer : (4) 60 cm. Explanation: A node is a point along a standing wave where the wave has minimal amplitude. The opposite of a node is an anti-node, a point where the amplitude of the standing wave is a maximum.

Description : Assuming a standard 60 Hz. input to the circuit shown in the illustration, the ripple frequency would be ____________. EL-0085 A. 30 Hz B. 60 Hz C. 90 Hz D. 120 Hz

Last Answer : Answer: D

Description : What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Last Answer : b) 30-60 dB

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

Description : The APO shall submit its nominations with complete documentation to the Commission not later than ______ prior to the expiry of the term of an incumbent chairman or member. a. 30 days b. 60 days c. 90 days d. 120 days

Last Answer : 60 days

Description : The intrinsic angle of the wave with a loss angle of 60 is a) 120 b) 60 c) 90 d) 30

Last Answer : d) 30

Description : The distance between node and adjacent antinode is 30 cm. The wavelength is (1) 30 cm. (2) 90 cm. (3) 120 cm. (4) 60 cm.

Last Answer : 60 cm.

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

Description : As per IS specifications, the maximum final setting time for ordinary Portland cement should be (A) 30 minutes (B) 1 hour (C) 6 hours (D) 10 hour

Last Answer : Answer: Option D

Description : The process of mixing, transporting, placing and compacting the cement, concrete should not take more than. (a) 30 minutes (b) 60minutes (c) 90 minutes (d) 120mm

Last Answer : (a) 30 minutes

Description : Which of the following represents hardest grade of bitumen? (A) 30/40 (B) 60/70 (C) 80/100 (D) 100/120

Last Answer : Answer: Option A

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Last Answer : a. 90

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Last Answer : c. 120

Description : What will be the frequency of a three-phase, six pole, AC generator operating at 1800 revolutions per minute? A. 60 hertz B. 90 hertz C. 120 hertz D. 180 hertz

Last Answer : Answer: B

Description : Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Last Answer : (C) 90

Description : The maximum permissible noise level to which a man working in a chemical plant can be exposed for eight hours per day is about __________ decibels. (A) 60 (B) 90 (C) 105 (D) 120

Last Answer : (B) 90

Description : Out of 5 women and 4 men, a committee of three members is to be formed in such a way that at least one member is woman. In how many different ways can this be done? 1) 60 2) 100 3) 120 4) 90 5) 80

Last Answer : 5) 80

Description : Revenue from services with duration of not more than……….. days to be recognized when rendering of services under contract is completed or substantially complted. a) 60 days b) 90 days c) 120 days d) 180 days

Last Answer : b) 90 days

Description : A suspected case of poisoning has been brought to the casualty with weakness, fainting, involuntary passage of urine and stools, profuse sweating, salivation, watering from nose and eyes. His pulse ... likely type of poisoning: A. Belladonna B. Barbiturate C. Anticholinesterase D. Dicophane (DDT

Last Answer : C. Anticholinesterase

Description : A suspected case of poisoning has been brought to the casualty with weakness, fainting, involuntary passage of urine and stools, profuse sweating, salivation, watering from nose and eyes. His pulse ... likely type of poisoning: A. Belladonna B. Barbiturate C. Anticholinesterase D. Dicophane (DDT)

Last Answer : C. Anticholinesterase

Description : The missing number in the series 40, 120, 60, 180, 90, ?, 135 is (A) 110 (B) 270 (C) 105 (D) 210

Last Answer : Answer: B

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Last Answer : Answer: Option D

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Description : The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

Last Answer : (a) Make s the cement sound and provides strength to the cement.

Description : Pozzolana cement is used with confidence for construction of (A) Dams (B) Massive foundations (C) R.C.C. structures (D) All the above

Last Answer : (D) All the above

Description : Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Last Answer : Answer: Option D

Description : Addition of pozzolana to cement causes (A) Reduction in permeability (B) Loss of heat of hydration (C) Reduction in bleeding (D) All the above

Last Answer : Answer: Option D

Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Last Answer : Answer: Option C

Description : Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Last Answer : Answer: Option D

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

Description : Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Last Answer : Answer: Option D