Attenuation in a network in decibels is equal to _____.

Attenuation in a network in decibels is equal to _____.
by

1 Answer

Answer :

Attenuation in a network in decibels is equal to 8.686 x attenuation in nepers.

by

Related questions

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

In electronic circuits, what name is given to a frequency discriminating network designed to select or pass certain bands of frequencies with low attenuation and cause very high attenuation to other frequencies?

Description : In electronic circuits, what name is given to a frequency discriminating network designed to select or pass certain bands of frequencies with low attenuation and cause very high attenuation to other frequencies?

Last Answer : ANSWER: FILTER

The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance C. reducing the input power to below its critical level. D. an impedance mismatch between the load and the line.

Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.

Last Answer : D. an impedance mismatch between the load and the line.

How loud is 93 decibels?

Description : How loud is 93 decibels?

Last Answer : answer:Here’s a comparison chart. http://www.controlnoise.com/decibel-chart/ At 90 and above the chart says “sustained exposure may cause hearing loss.” (I goggled this. it was easy to find.)

How many decibels can the human ear bear?

Description : How many decibels can the human ear bear?

Last Answer : The noise around us usually ranges from 20 / whispering / to 120 / aircraft start / decibels. It can be a little different for each individual. For sound above 120, the sound may start to hurt.

What are decibels a measure of?

Description : What are decibels a measure of?

Last Answer : Decibel is a measure of the ratio of the strength of twosignals, or two sound levels. It may also refers to the loudness ofONE sound, or the strength of ONE signal, with respect to astandard reference level.It is a logarithmic measure.

What does fifty decibels sound like?

Description : What does fifty decibels sound like?

Last Answer : A decibel is a measure of how loud a sound (any sound) is. 50 dBis about the sound level of gentle rainfall. Louder than a quietroom, softer than a quiet conversation. Not as loud as the dialtone on a telephone.

The standard audible capacity of a healthy human being as per World Health Organi-sation is in the range of - (1) 45-50 decibels (2) 200-250 decibels (3) 5-10 decibels (4) 2000-2500 decibels

Description : The standard audible capacity of a healthy human being as per World Health Organi-sation is in the range of - (1) 45-50 decibels (2) 200-250 decibels (3) 5-10 decibels (4) 2000-2500 decibels

Last Answer : (3) 5-10 decibels Explanation: Hearing range usually describes the range of frequencies that can be heard by an animal or human, though it can also refer to the range of levels. In humans the audible ... as low as 12 Hz under ideal laboratory conditions, to 20 kHz in most children and some adults.

Human beings can hear the sound range between: (1) 10 to 20 decibels (2) 100 to 150 decibels (3) 50 to 60 decibels (4) None of the above

Description : Human beings can hear the sound range between: (1) 10 to 20 decibels (2) 100 to 150 decibels (3) 50 to 60 decibels (4) None of the above

Last Answer : (4) None of the above Explanation: The most accepted sound range of human being is 0 to 120 decibels.

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Description : What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Last Answer : B. 3853 Hz

Ambient noise level can be reduced by __________ decibels by planting trees (like coconut, neem etc.) near public utility buildings (like hospitals & schools). (A) 1-2 (B) 5-10 (C) 15-20 (D) 25-30

Description : Ambient noise level can be reduced by __________ decibels by planting trees (like coconut, neem etc.) near public utility buildings (like hospitals & schools). (A) 1-2 (B) 5-10 (C) 15-20 (D) 25-30

Last Answer : (B) 5-10

Noise emitted by a ventilation fan at a distance of 3 metres is about __________ decibels. (A) 85 (B) 105 (C) 125 (D) 145

Description : Noise emitted by a ventilation fan at a distance of 3 metres is about __________ decibels. (A) 85 (B) 105 (C) 125 (D) 145

Last Answer : (B) 105

Noise level heard at a distance of about 100 metres from a jet engine with after burner is about __________ decibels. (A) 120 (B) 140 (C) 170 (D) 200

Description : Noise level heard at a distance of about 100 metres from a jet engine with after burner is about __________ decibels. (A) 120 (B) 140 (C) 170 (D) 200

Last Answer : (C) 170

Noise level during normal conversation among men is about __________ decibels. (A) 10 (B) 45 (C) 90 (D) 115

Description : Noise level during normal conversation among men is about __________ decibels. (A) 10 (B) 45 (C) 90 (D) 115

Last Answer : (B) 45

Maximum permissible limit of industrial noise as recommended by World Health Organisation (WHO) is __________ decibels. (A) 35 (B) 75 (C) 95 (D) 105

Description : Maximum permissible limit of industrial noise as recommended by World Health Organisation (WHO) is __________ decibels. (A) 35 (B) 75 (C) 95 (D) 105

Last Answer : (B) 75

Noise level heard inside a bus in busy city traffic or inside a sub-way train corresponds to about __________ decibels. (A) 75 (B) 95 (C) 120 (D) 140

Description : Noise level heard inside a bus in busy city traffic or inside a sub-way train corresponds to about __________ decibels. (A) 75 (B) 95 (C) 120 (D) 140

Last Answer : (B) 95

Sound produced by an automobile horn heard at a distance of 1.5 metres corresponds to about __________ decibels. (A) 90 (B) 120 (C) 150 (D) 180

Description : Sound produced by an automobile horn heard at a distance of 1.5 metres corresponds to about __________ decibels. (A) 90 (B) 120 (C) 150 (D) 180

Last Answer : (B) 120

Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Description : Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Last Answer : (C) 90

Shouting by a man at his full voice corresponds to a voice level of about __________ decibels. (A) 25 (B) 50 (C) 80 (D) 120

Description : Shouting by a man at his full voice corresponds to a voice level of about __________ decibels. (A) 25 (B) 50 (C) 80 (D) 120

Last Answer : (C) 80

Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30(C) 7 (D) 70

Description : Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30 (C) 7 (D) 70

Last Answer : (A) 3

The maximum permissible noise level to which a man working in a chemical plant can be exposed for eight hours per day is about __________ decibels. (A) 60(B) 90 (C) 105 (D) 120

Description : The maximum permissible noise level to which a man working in a chemical plant can be exposed for eight hours per day is about __________ decibels. (A) 60 (B) 90 (C) 105 (D) 120

Last Answer : (B) 90

Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Description : Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Last Answer : (B) 50

. Noise level inside a jet airliner in normal flight is about __________ decibels. (A) 80 (B) 100 (C) 125 (D) 150

Description : . Noise level inside a jet airliner in normal flight is about __________ decibels. (A) 80 (B) 100 (C) 125 (D) 150

Last Answer : (B) 100

Noise level audible to audience sitting in the 5th row from the stage during a large orchestra show corresponds to about __________ decibels. (A) 105 (B) 135 (C) 160 (D) 185

Description : Noise level audible to audience sitting in the 5th row from the stage during a large orchestra show corresponds to about __________ decibels. (A) 105 (B) 135 (C) 160 (D) 185

Last Answer : (B) 135

As per international norms, the maximum permissible value of noise level in the industrial environment is __________ decibels as measured at a distance of 1.5 metres from the source of noise. (A) 110 (B) 85 (C) 60 (D) 45

Description : As per international norms, the maximum permissible value of noise level in the industrial environment is __________ decibels as measured at a distance of 1.5 metres from the source of noise. (A) 110 (B) 85 (C) 60 (D) 45

Last Answer : (B) 85

Noise Pollution is measured in a) Hertz b) Fathoms c) Manometers d) Decibels.

Description : Noise Pollution is measured in a) Hertz b) Fathoms c) Manometers d) Decibels. 

Last Answer : d) Decibels.

If a quiet whisper is 10 decibels, then what is the average pain threshold in decibels for humans?

Description : If a quiet whisper is 10 decibels, then what is the average pain threshold in decibels for humans?

Last Answer : ANSWER: 120 DECIBELS (ACCEPT 110 TO 130)

“The blue whale can produce sounds up to 188 decibels. ”

Description : “The blue whale can produce sounds up to 188 decibels. ” 

Last Answer : This is the loudest sound produced by a living animal and can been detected as far away as 530 miles!

The standard audible capacity of a healthy human being as per World Health Organi-sation is in the range of (1) 45-50 decibels (2) 200-250 decibels (3) 5-10 decibels (4) 2000-2500 decibels

Description : The standard audible capacity of a healthy human being as per World Health Organi-sation is in the range of (1) 45-50 decibels (2) 200-250 decibels (3) 5-10 decibels (4) 2000-2500 decibels

Last Answer :  5-10 decibels

Reduction of signal strength during transmission is called attenuation. -Technology

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

What is attenuation ?

Description : What is attenuation ?

Last Answer : Natural behavior of an organism without causing disease is called attenuation i.e. reducing pathogenesity of the organism.

Which of the following parameters is not a primary parameter? a) Resistance b) Attenuation constant c) Capacitance d) Conductance

Description : Which of the following parameters is not a primary parameter? a) Resistance b) Attenuation constant c) Capacitance d) Conductance

Last Answer : Ans: B

A special request originated from some device to the CPU to acquire some of its time is called ___________ a) Disturbance b) Attenuation c) Interrupt d) Noise

Description : A special request originated from some device to the CPU to acquire some of its time is called ___________ a) Disturbance b) Attenuation c) Interrupt d) Noise

Last Answer : Answer: c Explanation: An interrupt is a kind of request which takes control of the system bus for some time, then performs all the operations and gives back control to the CPU. It is usually identified by some number and is handled by the interrupt controller

The upper pulse rate and information carrying capacity of a cable is limited by a. Pulse shortening b. Attenuation c. Light leakage d. Modal dispersion

Description : The upper pulse rate and information carrying capacity of a cable is limited by a. Pulse shortening b. Attenuation c. Light leakage d. Modal dispersion

Last Answer : d. Modal dispersion

Which of the cable length has the highest attenuation? a. 1 km b. 2 km c. 95 ft d. 5500 ft

Description : Which of the cable length has the highest attenuation? a. 1 km b. 2 km c. 95 ft d. 5500 ft

Last Answer : b. 2 km

Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Description : Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Last Answer : b. dB/km

The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation

Description : The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation

Last Answer : d. Attenuation

What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Last Answer : A. 198 dB

_________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Description : _________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Last Answer : D. Noise

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

Atmospheric attenuation is an attenuation which is due to A. mist and fog B. gasses in the atmosphere C. water vapor and oxygen D. rain

Description : Atmospheric attenuation is an attenuation which is due to A. mist and fog B. gasses in the atmosphere C. water vapor and oxygen D. rain

Last Answer : C. water vapor and oxygen

Which of the following phenomena is possible is free space medium? A. Reflection of radio wave B. Diffraction of radio wave C. Refraction of radio wave D. Attenuation of radio wave

Description : Which of the following phenomena is possible is free space medium? A. Reflection of radio wave B. Diffraction of radio wave C. Refraction of radio wave D. Attenuation of radio wave

Last Answer : D. Attenuation of radio wave

What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called? A. Sound Attenuation B. Transmission loss C. Sound absorption D. Barrier loss

Description : What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called? A. Sound Attenuation B. Transmission loss C. Sound absorption D. Barrier loss

Last Answer : B. Transmission loss

What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P

Description : What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P

Last Answer : A. Ku

What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Description : What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Last Answer : C. 179dB

Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Description : Loss due to the diffraction of light when it strikes on the irregularities formed during the manufacturing process of the fiber optics. A. Absorption loss B. Attenuation C. Bending loss D. Rayleigh scattering loss

Last Answer : D. Rayleigh scattering loss

What frequency does oxygen causes excessive attenuation A. 119 GHz B. 183 GHz C. 310 GHz D. 60 GHz

Description : What frequency does oxygen causes excessive attenuation A. 119 GHz B. 183 GHz C. 310 GHz D. 60 GHz

Last Answer : D. 60 GHz

Which is atmospheric attenuation? A. Attenuation due to rain B. Attenuation due to other gasses C. Attenuation due to mist and fog D. Due to water vapor and oxygen

Description : Which is atmospheric attenuation? A. Attenuation due to rain B. Attenuation due to other gasses C. Attenuation due to mist and fog D. Due to water vapor and oxygen

Last Answer : D. Due to water vapor and oxygen

The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Description : The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Last Answer : B. Noise