Description : What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB
Last Answer : C. 179dB
Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB
Last Answer : A. 198 dB
Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB
Last Answer : A. 403 dB
Description : Most satellites operate in which frequency band? A. 30 to 300 MHz B. 300 MHz to 3 GHz C. 3 GHz to 30 GHz D. Above 300 GHz
Last Answer : C. 3 GHz to 30 GHz
Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz
Last Answer : D. 500 MHz
Description : The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz
Last Answer : B. 14/11 GHz
Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz
Last Answer : C. 2225 MHz
Description : What is the frequency range of C-band? A. 8.5 to 12.5 GHz B. 3.4 to 6.425 GHz C. 12.95 to 14.95 GHz D. 27.5 to 31 GHz
Last Answer : B. 3.4 to 6.425 GHz
Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW
Last Answer : A. 0.871 μW
Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz
Last Answer : D. 300 MHz to 3 GHz
Description : Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz
Last Answer : B. 3 MHz to 30 MHz
Description : Which of the following is the uplink frequency in C-band? A. 5.925 GHz B. 4.2 GHz C. 7.425 GHz D. 3.7 GHz
Last Answer : A. 5.925 GHz
Description : What is the uplink receiver frequency if the downlink transmitter is on channel 4 (3.84 Ghz)? A. 6.065 GHz B. 6.84 GHz C. 6.65 GHz D. 6.05 GHz
Last Answer : A. 6.065 GHz
Description : The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz
Last Answer : B. 30 to 300 GHz
Description : What is the frequency range of C-band? A. 10.95 to 14.5 GHz B. 27.5 to 31 GHz C. 3.4 to 6.424 GHz D. 1.53 to 2.7 GHz
Last Answer : C. 3.4 to 6.424 GHz
Description : A radio frequency in the ultra high frequency band of the radio spectrum band. A. 235.50 MHz B. 450.50 MHz C. 150.50 GHz D. 0.31250 GHz
Last Answer : D. 0.31250 GHz
Description : Industrial noise frequency is between _________. A. 200 to 3000 Mhz B. 15 to 160 Mhz C. 0 to 10 Khz D. 20 Ghz
Last Answer : B. 15 to 160 Mhz
Description : Atmospheric attenuation is an attenuation which is due to A. mist and fog B. gasses in the atmosphere C. water vapor and oxygen D. rain
Last Answer : C. water vapor and oxygen
Description : Which is atmospheric attenuation? A. Attenuation due to rain B. Attenuation due to other gasses C. Attenuation due to mist and fog D. Due to water vapor and oxygen
Last Answer : D. Due to water vapor and oxygen
Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000
Last Answer : C. 125,000
Description : What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P
Last Answer : A. Ku
Description : _________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise
Last Answer : D. Noise
Description : The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference
Last Answer : B. Noise
Description : 310- Larger tension ratio result in... (a) Unnecessary high tension in belt (b) Reduction in belt life (c) Excessive belt slippage (d) Increase belt life
Last Answer : (c) Excessive belt slippage
Description : The frequency in rad/sec of a wave with velocity of that of light and phase constant of 20 units is (in GHz) a) 6 b) 60 c) 600 d) 0.6
Last Answer : a) 6
Description : .Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz
Last Answer : c. Sub 1 GHz
Description : If the reducing equivalents enter from NAD in the respiratory chain, the phsphate/oxygen (P:O) is (A) 1 (B) 2 (C) 3 (D) 4 MINERAL METABOLISM 183
Last Answer : Answer : C
Description : Purity of oxygen used for blowing in steel making L.D. converter is 99.5%. The boiling point of oxygen is about __________ °C. (A) -53 (B) -103 (C) -183 (D) -196
Last Answer : (C) -183
Description : Oxygen is separated by distillation from air after its liquefaction. The boiling point of oxygen is about __________ °C. (A) -83 (B) -183 (C) -196 (D) -218
Last Answer : (B) -183
Description : Calculate the Larmer angular frequency for a magnetic flux density of 12.34 x 10 -10 . a) 108.36 b) 810.63 c) 368.81 d) 183.36
Last Answer : a) 108.36
Description : What is the maximum power that can be obtained from a microwave tube at 10 GHz? A. 500 W B. 10 W C. 50 W D. 20 W
Last Answer : B. 10 W
Description : What noise is observable at frequencies in the range from about 8 MHz to somewhat 1.5 GHz? A. Industrial noise B. Atmospheric noise C. Space noise D. Shot noise
Last Answer : C. Space noise
Description : What noise type is observable between 8 MHz to somewhat above 1.43 GHz or up to 1.5 GHz? A. Solar noise B. Space noise C. Galactic noise D. Cosmic noise
Last Answer : B. Space noise
Description : Determine the terrain sensitivity loss for a 4-GHz carrier that is propagating over a very dry, mountainous area. A. -1.25 dB B. -3.05 dB C. -2.01 dB D. -5.01 dB
Last Answer : A. -1.25 dB
Description : Which of the following are uplinks in the Ku band? A. 14 to 14.5 GHz B. 11.7 to 12.2 GHz C. 14 to 15.5 GHz D. 11 to 11.5 GHz
Last Answer : A. 14 to 14.5 GHz
Description : Electromagnetic waves of frequencies arbitrarily lower than 3,000 GHz, propagated in space without artificial guide. A. Space waves B. Terrestrial waves C. Mobile D. Hertzian waves
Last Answer : D. Hertzian waves
Description : Coaxial lines are used on those systems operating _______. A. Below 2 GHz B. At 300 MHz C. Above 10KHz D. Above 10GHz
Last Answer : A. Below 2 GHz
Description : The Ku-band in the satellite service A. 14/11 GHz B. 30/17 GHz C. 8/7 GHz D. 6/4 GHz
Last Answer : A. 14/11 GHz
Description : Atmospheric noise is less at severe frequencies above A. Audio level B. 30 MHz C. 10 GHz D. 1 GHz
Last Answer : B. 30 MHz
Description : Extra-terrestrial noise is observable at frequencies from A. 0 to 20 KHz B. Above 2 GHz C. 8 to 1.43 GHz D. 5 to 8 GHz
Last Answer : C. 8 to 1.43 GHz
Description : Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz
Last Answer : A. 800 THz
Description : A voice-grade circuit using the PTN has an ideal passband of A. 0 to 4 Hz B. 0 to 4 kHz C. 0 to 4 GHz D. 0 to 4 MHz
Last Answer : B. 0 to 4 kHz
Description : What is the free space loss, in dB, between two microwave parabolic antennas 38.0 kilometer apart operating at 7.0 GHz? A. 145.6 dB B. 138.5 dB C. 135.5 dB D. 140.89 dB
Last Answer : D. 140.89 dB
Description : The upper pulse rate and information carrying capacity of a cable is limited by a. Pulse shortening b. Attenuation c. Light leakage d. Modal dispersion
Last Answer : d. Modal dispersion
Description : Which of the cable length has the highest attenuation? a. 1 km b. 2 km c. 95 ft d. 5500 ft
Last Answer : b. 2 km
Description : Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch
Last Answer : b. dB/km
Description : The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation
Last Answer : d. Attenuation
Description : Which of the following phenomena is possible is free space medium? A. Reflection of radio wave B. Diffraction of radio wave C. Refraction of radio wave D. Attenuation of radio wave
Last Answer : D. Attenuation of radio wave
Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.
Last Answer : D. an impedance mismatch between the load and the line.
Description : What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called? A. Sound Attenuation B. Transmission loss C. Sound absorption D. Barrier loss
Last Answer : B. Transmission loss