Ultimate strength of cold drawn high steel wires (A) Increases with increase in diameter of bar (B) Decreases with increase in diameter of bar (C) Does not depend on diameter of bar (D) None of the above

Ultimate strength of cold drawn high steel wires
(A) Increases with increase in diameter of bar
(B) Decreases with increase in diameter of bar
(C) Does not depend on diameter of bar
(D) None of the above
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Which of the following has high tensile strength? (A) Plain hot rolled wires (B) Cold drawn wires (C) Heat treated rolled wires (D) All have same tensile strength

Description : Which of the following has high tensile strength? (A) Plain hot rolled wires (B) Cold drawn wires (C) Heat treated rolled wires (D) All have same tensile strength

Last Answer : Answer: Option B

The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases with the increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Description : The ultimate consolidation settlement of a structure resting on a soil (A) Decreases with the increase in the initial voids ratio (B) Decreases with the decrease in the plastic limit (C) Increases ... increase in the initial voids ratio (D) Increases with the decrease in the porosity of the soil

Last Answer : Answer: Option A

The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Description : The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Last Answer : (d) Increases with increase in stirrups and longitudinal steels.

When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Description : When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Last Answer : (B) Ductility

Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Description : Select the incorrect statement [ A ] R.C.C has better fire resistance than steel [ B ] R.C.C. structure is economical than steel structure [ C ] Strength of concrete decreases as age increases [ D ] R.C.C can be used for under water and marine structures

Last Answer : [ C ] Strength of concrete decreases as age increases

Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild steel bar in tension from initial zero strain to failure is (a) 4, 1, 2, 3 and 5 (b) 1, 4, 3, 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Description : Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild ... , 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Last Answer : (c) 4, 1, 3, 5 and 2

The ultimate tensile strength of structural mild steel is about (A) 160 N/mm² (B) 260 N/mm² (C) 420 N/mm² (D) 520 N/mm2

Description : The ultimate tensile strength of structural mild steel is about (A) 160 N/mm² (B) 260 N/mm² (C) 420 N/mm² (D) 520 N/mm

Last Answer : Answer: Option C

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

The velocity of sound in air – (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Description : The velocity of sound in air – (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Last Answer : (4) decreases with decrease of temperature Explanation: Assuming air to be an ideal gas, the speed of sound c depends on temperature only, not on the pressure or density. As air ... to the individual air particles having extra kinetic energy at higher temperatures and lesser at lower temperatures.

The velocity of sound in air – (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Description : The velocity of sound in air – (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Last Answer : (4) decreases with decrease of temperature Explanation: Assuming air to be an ideal gas, the speed of sound c depends on temperature only, not on the pressure or density. As air ... to the individual air particles having extra kinetic energy at higher temperatures and lesser at lower temperatures.

The velocity of sound in air (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Description : The velocity of sound in air (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Last Answer :  decreases with decrease of temperature

In a deposit of normally consolidated clay (A) Effective stress increases with depth but water content of soil and undrained strength decrease with depth (B) Effective stress and water content increase with depth but undrained strength decreases with depth C) Effective stress and undrained strength increase with depth but water content decreases with depth (D) Effective stress, water content and undrained strength decrease with depth

Description : In a deposit of normally consolidated clay (A) Effective stress increases with depth but water content of soil and undrained strength decrease with depth (B) Effective stress and water ... decreases with depth (D) Effective stress, water content and undrained strength decrease with depth

Last Answer : C) Effective stress and undrained strength increase with depth but water content decreases with depth

In soils having same values of plasticity index, if liquid limit is increased, then(A) Compressibility and permeability decrease and dry strength increases (B) Compressibility, permeability and dry strength decrease (C) Compressibility, permeability and dry strength increase (D) Compressibility and permeability increase and dry strength decreases

Description : In soils having same values of plasticity index, if liquid limit is increased, then (A) Compressibility and permeability decrease and dry strength increases (B) Compressibility, ... permeability and dry strength increase (D) Compressibility and permeability increase and dry strength decreases

Last Answer : Answer: Option D

After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Description : After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Last Answer : Answer: Option A

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Last Answer : (C) Cast iron

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Last Answer : Option B

High temperature (A) Increases the strength of concrete (B) Decreases the strength of concrete (C) Has no effect on the strength of concrete (D) None of these

Description : High temperature (A) Increases the strength of concrete (B) Decreases the strength of concrete (C) Has no effect on the strength of concrete (D) None of these

Last Answer : Answer: Option B

A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the thickness of the cylinder if it is twice the diameter of the cylinder. a) 12mm b) 4mm c) 8mm d) 16mm

Description : A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the thickness of the cylinder if it is twice the diameter of the cylinder. a) 12mm b) 4mm c) 8mm d) 16mm

Last Answer : c) 8mm

A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder. a) 540mm b) 270mm c) 400mm d) 350mm

Description : A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder. a) 540mm b) 270mm c) 400mm d) 350mm

Last Answer : a) 540mm

A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending strain energy stored in the bar, is (A) 411 N mm (B) 511 N mm (C) 611 N mm (D) 711 N mm

Description : A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a  load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending  strain energy stored in the ... (A) 411 N mm  (B) 511 N mm  (C) 611 N mm  (D) 711 N mm 

Last Answer : (C) 611 N mm 

Minimum cover to longitudinal steel in a column should be (if the diameter of bar, Ø> 12mm) [ A ] 25 mm [ B ] 30 mm [ C ] 40 mm [ D ] 50 mm

Description : Minimum cover to longitudinal steel in a column should be (if the diameter of bar, Ø> 12mm) [ A ] 25 mm [ B ] 30 mm [ C ] 40 mm [ D ] 50 mm

Last Answer : [ C ] 40 mm

The anchorage value of the hook for a mild steel bar is generally considered as (d = diameter of bar)

Description : The anchorage value of the hook for a mild steel bar is generally considered as (d = diameter of bar) [ A ] 8 d [ B ] 16 d [ C ] 32 d [ D ] 48 d

Last Answer : [ B ] 16 d

The spring constant of a helical compression spring does not depend on a. Coil diameter b. Material strength c. Number of active turns d. wire diameter

Description : The spring constant of a helical compression spring does not depend on a. Coil diameter b. Material strength c. Number of active turns d. wire diameter

Last Answer : b. Material strength

Coefficient of permeability of soil (A) Does not depend upon temperature (B) Increases with the increase in temperature (C) Increases with the decrease in temperature (D) None of the above

Description : Coefficient of permeability of soil (A) Does not depend upon temperature (B) Increases with the increase in temperature (C) Increases with the decrease in temperature (D) None of the above

Last Answer : Answer: Option B

With increase in the ratio of orifice diameter to pipe diameter, the fraction of the orifice pressure differential that is permanently lost (A) Increases(B) Decreases(C) Remains unchanged(D) Increases exponentially

Description : With increase in the ratio of orifice diameter to pipe diameter, the fraction of the orifice pressure differential that is permanently lost (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Description : With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Last Answer : (C) Remain constant

For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Last Answer : (A) Decreases

The hardenability of steel decreases with (A) Decrease in dislocation density (B) Increase in solutionising temperature (C) Increase in strength (D) Decrease in grain size

Description : The hardenability of steel decreases with (A) Decrease in dislocation density (B) Increase in solutionising temperature (C) Increase in strength (D) Decrease in grain size

Last Answer : D) Decrease in grain size

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Description : With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Last Answer : (A) Impact strength

Ultimate strength in tension as compared to that in shear for steel is (A) Half (B) One third (C) One and half times (D) One fourth

Description : Ultimate strength in tension as compared to that in shear for steel is (A) Half (B) One third (C) One and half times (D) One fourth

Last Answer : (C) One and half times

A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Description : A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Last Answer : Rc = BHN/10 = 18, VHN = BHN = 180 Ultimate strength = 3.48 × BHN MPa = 620 MPa.

As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Description : As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Last Answer : decreases

Strength of concrete with passage of time (A) Increases (B) Decreases (C) Fluctuates (D) Remains constant

Description : Strength of concrete with passage of time (A) Increases (B) Decreases (C) Fluctuates (D) Remains constant

Last Answer : A

Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Description : Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a period of 24 months, the strength of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Description : Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a ... of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Last Answer : Answer: Option A

With storage, strength of cement (A) Increases (B) Decreases (C) Remains the same (D) None to these

Description : With storage, strength of cement (A) Increases (B) Decreases (C) Remains the same (D) None to these

Last Answer : Answer: Option B

Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Description : Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Last Answer : (c) Increases with shear strength for a given clay content

The use of air-entraining agents in concretes (a) Increases workability of concrete (b) Decreases bleeding (c) Decreases strength (d) All of these

Description : The use of air-entraining agents in concretes (a) Increases workability of concrete (b) Decreases bleeding (c) Decreases strength (d) All of these

Last Answer : (d) All of these

Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period of 24 months, the strength of cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Description : Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period ... cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Last Answer : [ B ] With passage of time, the strength of cement increases

The entrained air in concrete [ A ] Increases the strength [ B ] Decreases the resistance to weathering [ C ] Increases the workability [ D ] Decreases the workability

Description : The entrained air in concrete [ A ] Increases the strength [ B ] Decreases the resistance to weathering [ C ] Increases the workability [ D ] Decreases the workability

Last Answer : [ C ] Increases the workability

With increase in temperature, the thermal conductivity of steel (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Description : With increase in temperature, the thermal conductivity of steel (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

With the increase of carbon content in steel, maximum stress (A) Increases (b) Decreases (C) Remains the same (d) none

Description : With the increase of carbon content in steel, maximum stress (A) Increases (b) Decreases (C) Remains the same (d) none

Last Answer : (A) Increases

As the percentage of steel increases (A) Depth of neutral axis decreases (B) Depth of neutral axis increases (C) Lever arm increases (D) Lever arm decreases

Description : As the percentage of steel increases (A) Depth of neutral axis decreases (B) Depth of neutral axis increases (C) Lever arm increases (D) Lever arm decreases

Last Answer : Answer: Option B

As the percentage of steel in a beam increases, the depth of neutral axis (a) Increases (b) Decreases (c) Equal to (d) None of these

Description : As the percentage of steel in a beam increases, the depth of neutral axis (a) Increases (b) Decreases (c) Equal to (d) None of these

Last Answer : (a) Increases

As the percentage of steel increases [ A ] Depth of neutral axis decreases [ B ] Depth of neutral axis increases [ C ] Lever arm increases [ D ] None of the above are correct

Description : As the percentage of steel increases [ A ] Depth of neutral axis decreases [ B ] Depth of neutral axis increases [ C ] Lever arm increases [ D ] None of the above are correct

Last Answer : [ B ] Depth of neutral axis increases

With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Description : With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

High carbon content in the steel causes (A) Decrease in tensile strength but increase in ductility (B) Increase in tensile strength but decrease in ductility (C) Decrease in both tensile strength and ductility (D) Increase in both tensile strength and ductility

Description : High carbon content in the steel causes (A) Decrease in tensile strength but increase in ductility (B) Increase in tensile strength but decrease in ductility (C) Decrease in both tensile strength and ductility (D) Increase in both tensile strength and ductility

Last Answer : Answer: Option B

Two footings, one circular and the other square, are founded on the surface of a purely cohesionless soil. The diameter of the circular footing is the same as that of the side of the square footing. The ratio between their ultimate bearing capacities will be : (a) 1.0 (b) 1.3 (c) 1.33 (d) 0.75

Description : Two footings, one circular and the other square, are founded on the surface of a purely cohesionless soil. The diameter of the circular footing is the same as that of the side of the square footing. The ratio between their ultimate bearing capacities will be : (a) 1.0 (b) 1.3 (c) 1.33 (d) 0.75

Last Answer : (d) 0.75

Non-metals cannot be drawn into wires. Why ? [DAV2008] -Science

Description : Non-metals cannot be drawn into wires. Why ? [DAV2008] -Science

Last Answer : Non-metals are not ductile, therefore they cannot be drawn into wires.