With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

With increase in the carbon percentage in the steel, its
(A) Hardness increases
(B) Ductility reduces
(C) Tensile strength increases
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

Manganese in steel affects its (A) Ductility (B) Tensile strength (C) Hardness (D) None of these

Description : Manganese in steel affects its (A) Ductility (B) Tensile strength (C) Hardness (D) None of these

Last Answer : (B) Tensile strength

Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Description : Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Last Answer : (B) Increasing the ductility transition temperature

High carbon content in the steel causes (A) Decrease in tensile strength but increase in ductility (B) Increase in tensile strength but decrease in ductility (C) Decrease in both tensile strength and ductility (D) Increase in both tensile strength and ductility

Description : High carbon content in the steel causes (A) Decrease in tensile strength but increase in ductility (B) Increase in tensile strength but decrease in ductility (C) Decrease in both tensile strength and ductility (D) Increase in both tensile strength and ductility

Last Answer : Answer: Option B

Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness

Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share

Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Define the term: i)Tensile strength ii) Hardness iii) Ductility iv) Soldering

Description : Define the term: i)Tensile strength ii) Hardness iii) Ductility iv) Soldering

Last Answer : i)Tensile Strength : Tensile Strength is the ability of metal to carry a load without breaking. ii)Hardness :- Hardness is the ability of metal to resist wear or abrasion and resist penetration. ... a non ferrous alloy having melting point below 4000 c in between them is called as soldering. 

In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Description : In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________ increases. (A) Percentage elongation (B) Brinell hardness (C) Tensile strength (D) All 'a', 'b' & 'c'

Last Answer : (A) Percentage elongation

With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Description : With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________ is not affected. (A) Impact strength (B) Percent elongation (C) Hardness (D) Both 'b' & 'c'

Last Answer : (A) Impact strength

Primary designation of steel is based on its (A) Hardness & tensile strength (B) Carbon content (C) Iron content (D) Alloying elements content

Description : Primary designation of steel is based on its (A) Hardness & tensile strength (B) Carbon content (C) Iron content (D) Alloying elements content

Last Answer : (D) Alloying elements content Sh

When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Description : When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)

Last Answer : (B) Ductility

Work hardening of a material (A) Decreases its tensile strength (B) Decreases its ductility (C) Increases its ductility (D) Does not affect its ductility

Description : Work hardening of a material (A) Decreases its tensile strength (B) Decreases its ductility (C) Increases its ductility (D) Does not affect its ductility

Last Answer : (B) Decreases its ductility

All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium

Last Answer : (A) Nickel

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in carbide/graphite ratio in cast iron, its (A) Hardness & brittleness increases (B) Ductility decreases (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Description : The percentage elongation and the percentage reduction in area depends upon (a) Tensile strength of the material (b) Ductility of the material (c) Toughness of the material (d) None of these

Last Answer : B

Cast irons are generally specified by their (A) Carbon content (B) Tensile strength (C) Hardness (D) Manufacturing process

Description : Cast irons are generally specified by their (A) Carbon content (B) Tensile strength (C) Hardness (D) Manufacturing process

Last Answer : (B) Tensile strength

Addition of nickel to copper improves its (A) Machinability (B) Ductility (C) Strength (D) Hardness

Description : Addition of nickel to copper improves its (A) Machinability (B) Ductility (C) Strength (D) Hardness

Last Answer : (D) Hardness

In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Description : In cold working of metal as compared to its hot working (A) Cracks and blow holes are eliminated (B) Ductility and impact strength improves (C) Appreciable strain hardening is produced (D) Yield stress, hardness and fatigue strength is not at all affected

Last Answer : (C) Appreciable strain hardening is produced

Due to circumferential action of the spiral in a spirally reinforced column (A) Capacity of column is decreased (B) Ductility of column reduces (C) Capacity of column is decreased but ductility of column increases (D) Both the capacity of column and ductility of column increase

Description : Due to circumferential action of the spiral in a spirally reinforced column (A) Capacity of column is decreased (B) Ductility of column reduces (C) Capacity of column is decreased but ductility of column increases (D) Both the capacity of column and ductility of column increase

Last Answer : Answer: Option D

Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Description : Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Last Answer : (C) Tenacity & hardness

Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)

Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Description : Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Last Answer : (D) Its elastic limit very close to ultimate breaking strength

Cast iron is having very high (A) Proximity between its elastic limit and ultimate breaking strength (B) Ductility (C) Tensile strength (D) All (A), (B) and (C)

Description : Cast iron is having very high (A) Proximity between its elastic limit and ultimate breaking strength (B) Ductility (C) Tensile strength (D) All (A), (B) and (C)

Last Answer : (A) Proximity between its elastic limit and ultimate breaking strength

Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Last Answer : (B) Cutting hardness

Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Description : Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Last Answer : (D) Elastic limit close to ultimate breaking strength

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Description : Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Last Answer : a) A reduced resistance to corrosion

Define ductility; plasticity; hardness strength.

Description : Define ductility; plasticity; hardness strength.

Last Answer : Definition: 1) Ductility Ductility is the ability of a material to be deformed plastically without fracture under tensile strength. Ductility is the property of material by which materials can be ... or cutting. The ability of a material to resist wear or abrasion and resist penetration.

Presence of nitrogen in steel (A) Makes it brittle (B) Increases its strength (C) Increases its hardness (D) Is desirable

Description : Presence of nitrogen in steel (A) Makes it brittle (B) Increases its strength (C) Increases its hardness (D) Is desirable

Last Answer : (A) Makes it brittle

The graphite in grey irons exists in the form of flakes which act as stress-raisers under tensile loading and consequently grey irons have relatively low tensile strength and ductility. Still grey iron is extensively used in engineering. Why ?

Description : The graphite in grey irons exists in the form of flakes which act as stress-raisers under tensile loading and consequently grey irons have relatively low tensile strength and ductility. Still grey iron is extensively used in engineering. Why ?

Last Answer : (a) Cheapness. (B) Low melting point and high fluidity making it suitable for castings of intricate shape. (c) Relatively good erosion and corrosion resistance. (d) High damping capacity, with respect to vibration. (e) Relatively good mechanical properties under compressive loading.

The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Description : The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Last Answer : a) malleability

Which of the following physical properties is TRUE of most dense ceramic materials? w) high tensile strength x) good ductility y) high compressive strength z) high electrical conductivity

Description : Which of the following physical properties is TRUE of most dense ceramic materials? w) high tensile strength x) good ductility y) high compressive strength z) high electrical conductivity

Last Answer : ANSWER: Y -- HIGH COMPRESSIVE STRENGTH

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

Due to Circumferential action of the spiral reinforcement in a column [ A ] Capacity of column is decreased but ductility of column increases [ B ] Both the capacity of column an ductility of column increases [ C ] Capacity of column increases [ D ] Ductility of the column reduces

Description : Due to Circumferential action of the spiral reinforcement in a column [ A ] Capacity of column is decreased but ductility of column increases [ B ] Both the capacity of column an ductility of column increases [ C ] Capacity of column increases [ D ] Ductility of the column reduces

Last Answer : [ B ] Both the capacity of column an ductility of column increases

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron Answer: Option C

Last Answer : (C) Cast iron

Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Description : Which of the following has the least value of ultimate tensile strength (UTS)? (A) Medium carbon steel (B) High carbon steel (C) Cast iron (D) Wrought iron

Last Answer : Option B

Reduction in the grain size reduces the __________ of the material. (A) Fatigue resistance (B) Tensile strength (C) Creep resistance (D) All (A), (B) & (C)

Description : Reduction in the grain size reduces the __________ of the material. (A) Fatigue resistance (B) Tensile strength (C) Creep resistance (D) All (A), (B) & (C)

Last Answer : (C) Creep resistance

Reduction in the grain size reduces the __________ of the material. (A) Fatigue resistance (B) Tensile strength (C) Creep resistance (D) All (A), (B) & (C)

Description : Reduction in the grain size reduces the __________ of the material. (A) Fatigue resistance (B) Tensile strength (C) Creep resistance (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Steel rods are used in reinforced concrete to increase its __________ strength. (A) Shear (B) Tensile (C) Compressive (D) None of these

Description : Steel rods are used in reinforced concrete to increase its __________ strength. (A) Shear (B) Tensile (C) Compressive (D) None of these

Last Answer : (B) Tensile

When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally

Description : When percentage of mica present in sand is large, it (a) Reduces the strength of mortar, or concrete (b) Increases the strength of mortar or concrete (c) Has no effect on mortar, or concrete strength (d) Enhances the strength of mortar, or concrete, but only marginally

Last Answer : (c) Has no effect on mortar, or concrete strength

A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Description : A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Last Answer : Rc = BHN/10 = 18, VHN = BHN = 180 Ultimate strength = 3.48 × BHN MPa = 620 MPa.

Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Last Answer : (B) Fluidity & castability

Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration (C) Application of activated carbon reduces the temporary hardness of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Description : The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Last Answer : (A) Ductility