If the gross vehicle weight of a truck is 30 tonne and rolling resistance is 30 kg/tonne, then the tractive effort required to keep the truck moving at a uniform speed is (A) 30 kg (B) 300 kg (C) 900 kg (D) 1000 kg

If the gross vehicle weight of a truck is 30 tonne and rolling resistance is 30 kg/tonne, then the
tractive effort required to keep the truck moving at a uniform speed is
(A) 30 kg
(B) 300 kg
(C) 900 kg
(D) 1000 kg
by

1 Answer

Answer :

(C) 900 kg
by

Related questions

A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Description : A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The ... will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Last Answer : (C) 40 kg/tonne

A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance of 40 kg per tonne, then the drawbar pull of the tractor will (A) Reduce by 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Description : A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance ... 200 kg (B) Increase by 200 kg (C) Increase by 250 kg (D) Reduce by 250 kg

Last Answer : (A) Reduce by 200 kg

On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Description : On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Last Answer : Answer: Option C

A gradient along which the vehicle does not require any tractive effort to maintain a specified speed, is known as (A) Ruling gradient (B) Pushing gradient (C) Floating gradient (D) Minimum gradient

Description : A gradient along which the vehicle does not require any tractive effort to maintain a specified speed, is known as (A) Ruling gradient (B) Pushing gradient (C) Floating gradient (D) Minimum gradient

Last Answer : Answer: Option C

The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is (A) 3425 kg (B) 5515 kg (C) 4350 kg (D) 2975 kg

Description : The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is (A) 3425 kg (B) 5515 kg (C) 4350 kg (D) 2975 kg

Last Answer : (B) 5515 kg

A hydraulic press has a ram of 15 cm diameter and plunger of 1.5 cm. It is required to lift a weight of 1 tonne. The force required on plunger is equal to (A) 10 kg (B) 100 kg (C) 1000 kg (D) 1 kg

Description : A hydraulic press has a ram of 15 cm diameter and plunger of 1.5 cm. It is required to lift a weight of 1 tonne. The force required on plunger is equal to (A) 10 kg (B) 100 kg (C) 1000 kg (D) 1 kg

Last Answer : Answer: Option A

Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Description : Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Last Answer : Answer: Option C

The grade resistance factor for an earth moving machine can be obtained by multiplying grade percentage by a factor approximately equal to (A) 2 kg/tonne (B) 6 kg/tonne (C) 9 kg/tonne (D) 20 kg/tonne

Description : The grade resistance factor for an earth moving machine can be obtained by multiplying grade percentage by a factor approximately equal to (A) 2 kg/tonne (B) 6 kg/tonne (C) 9 kg/tonne (D) 20 kg/tonne

Last Answer : (C) 9 kg/tonne

Tractive effort is required to?

Last Answer : Tractive effort is required to overcome the gravity component of train mass, overcome friction, windage and curve resistance, accelerate the train mass.

For melting one tonne of cast iron (A) 700 m3 air is required (B) 20 kg limestone is required (C) One quintal coke is required (D) All the above

Description : For melting one tonne of cast iron (A) 700 m3 air is required (B) 20 kg limestone is required (C) One quintal coke is required (D) All the above

Last Answer : Answer: Option D

The serum estradiol level in women during 11–20 days of menstrual cycle is (A) 5–30 pg/ml (B) 50–300 pg/ml (C) 500–900 pg/ml (D) 1000 pg/ml

Description : The serum estradiol level in women during 11–20 days of menstrual cycle is (A) 5–30 pg/ml (B) 50–300 pg/ml (C) 500–900 pg/ml (D) 1000 pg/ml

Last Answer : Answer : B

For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Description : For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Last Answer : Answer: Option D

Over taking time required for a vehicle with design speed 50 km ph and overtaking acceleration 1.25 m/sec2 to overtake a vehicle moving at a speed 30 km ph, is (A) 5.0 secs (B) 6.12 secs (C) 225.48 secs (D) 30 secs

Description : Over taking time required for a vehicle with design speed 50 km ph and overtaking acceleration 1.25 m/sec2 to overtake a vehicle moving at a speed 30 km ph, is (A) 5.0 secs (B) 6.12 secs (C) 225.48 secs (D) 30 secs

Last Answer : Answer: Option B

Tractive coefficient of a Crawler truck in loose soil is (a) Less than that of rubber tyre tractors (b) More than that of rubber tyre tractors (c) Same as that of rubber tyre tractors (d) Nearly zero

Description : Tractive coefficient of a Crawler truck in loose soil is (a) Less than that of rubber tyre tractors (b) More than that of rubber tyre tractors (c) Same as that of rubber tyre tractors (d) Nearly zero

Last Answer : (d) Nearly zero

If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Description : If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Last Answer : Answer: Option B

Define (i) Draw Bar Pull (ii) Tractive Effort

Description : Define (i) Draw Bar Pull (ii) Tractive Effort 

Last Answer : (i) Draw Bar Pull: If the extra load attached to the vehicle is pulled by fully utilizing the excess power, then, maximum drawbar pull = Tractive effort Road resistance.  (ii) Tractive effort ... rear wheel tyres and the road. Therefore, the useful tractive effort is always less than the traction.

Tractive effort acts

Description : Tractive effort acts  A) At 90° with respect to the rails measured in counter clockwise direction B) At 270° with respect to the rails measured in counter clockwise direction C) Tangential to the driving wheel D) For overcoming the effect of gravity only when a train is being hauled

Last Answer : Tractive effort acts Tangential to the driving wheel

Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Description : Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Last Answer : b. 163.5 KW

For a properly designed vehicle, the resistance generally ignored, is (A) Wind resistance (B) Rolling resistance (C) Grade resistance (D) Axle resistance

Description : For a properly designed vehicle, the resistance generally ignored, is (A) Wind resistance (B) Rolling resistance (C) Grade resistance (D) Axle resistance

Last Answer : Answer: Option D

Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? (A) Concrete (B) Loose sand (C) Asphalt (D) Firm earth

Description : Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? (A) Concrete (B) Loose sand (C) Asphalt (D) Firm earth

Last Answer : (B) Loose sand

The smallest plant family ‘Gymnosperm’ has how many species? (a) 640 (b) 300 (c) 1000 (d) 900

Description : The smallest plant family ‘Gymnosperm’ has how many species? (a) 640 (b) 300 (c) 1000 (d) 900

Last Answer : (d) 900

Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Last Answer : (A) 600-750

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush one tonne of feed to 200 microns (C) Energy (kWh/ton of feed) needed to crush small feed to such a size that 80% of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

In case of cement concrete pavements, pick up the incorrect statement (A) Tractive resistance is low (B) Initial cost of construction is high (C) Initial cost of construction is low (D) Visibility during nights is high

Description : In case of cement concrete pavements, pick up the incorrect statement (A) Tractive resistance is low (B) Initial cost of construction is high (C) Initial cost of construction is low (D) Visibility during nights is high

Last Answer : Answer: Option C

The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Description : The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Last Answer : Answer: Option A

Kabi buys wheat at Rs. 15/kg and puts a price tag on it so as to earn a profit of 10%. However, his faulty balance shows 1000 gm when it is actually 900 gm. What is his actual gain percentage?

Description : Kabi buys wheat at Rs. 15/kg and puts a price tag on it so as to earn a profit of 10%. However, his faulty balance shows 1000 gm when it is actually 900 gm. What is his actual gain percentage?

Last Answer : CP of 1000gm = Rs. 15  SP of 900gm = Rs. 16.5  SP of 1000gm =16.5x1000/900 = Rs. 18  Now take 1000gm as reference to calculate profit. Profit=SP-CP=18-15=Rs. 3 Profit % = 3x100/15 = 20%

A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Description : A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Last Answer : a. Less than 3.6 km/hour

Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Description : weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Last Answer : ANS: A

A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Description : A body weighing one tonne falls through 8 cm on to a spring of stiffness 500 kg/cm the spring will be compressed through a.8 cm b.6 cm c.4 cm d.10 cm e.12 cm

Last Answer : a. 8 cm

The size of a plane table is (A) 750 mm × 900 mm (B) 600 mm × 750 mm (C) 450 mm × 600 mm (D) 300 mm × 450 mm

Description : The size of a plane table is (A) 750 mm × 900 mm (B) 600 mm × 750 mm (C) 450 mm × 600 mm (D) 300 mm × 450 mm

Last Answer : (B) 600 mm × 750 mm

The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum reactions on the ground would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Description : The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum ... would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Last Answer : e. 4.4 tonnes

Average force acting on 900 kg car if it's velocity ranges from 5 m s-1 to 30 m s-1 in 12 s is A. 1875 N B. 2000 NC. 3000 ND. 1560 N

Description : Average force acting on 900 kg car if it's velocity ranges from 5 m s-1 to 30 m s-1 in 12 s is A. 1875 N B. 2000 NC. 3000 N D. 1560 N

Last Answer : 1875 N

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Description : The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Last Answer : ANSWER: Z -- 90 DEGREES

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Description : The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Last Answer : (B) 102 kg

A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg. (A) 10 (B) 100 (C) 1000 (D) 10000

Description : A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg. (A) 10 (B) 100 (C) 1000 (D) 10000

Last Answer : (B) 100

For a vehicle moving with a speed of 80 km per hour, the brake reaction time, in ordinary cases, is (A) 1 sec (B) 1.5 sec (C) 2.0 sec(D) 2.5 sec

Description : For a vehicle moving with a speed of 80 km per hour, the brake reaction time, in ordinary cases, is (A) 1 sec (B) 1.5 sec (C) 2.0 sec (D) 2.5 sec

Last Answer : Answer: Option D

If V is speed of a moving vehicle, r is radius of the curve, g is the acceleration due to gravity, W is the width of the carriageway, the super elevation is (A) WV/gr (B) W²V/gr (C) WV²/gr (D) WV/gr²

Description : If V is speed of a moving vehicle, r is radius of the curve, g is the acceleration due to gravity, W is the width of the carriageway, the super elevation is (A) WV/gr (B) W²V/gr (C) WV²/gr (D) WV/gr²

Last Answer : Answer: Option C

The ability of a driver to stop the vehicle moving with the designed speed, depends upon: (A) Perception time (B) Brake reaction time (C) Efficiency of the brakes (D) All the above

Description : The ability of a driver to stop the vehicle moving with the designed speed, depends upon: (A) Perception time (B) Brake reaction time (C) Efficiency of the brakes (D) All the above

Last Answer : Answer: Option D

To compensate the loss of tractive force of vehicles along curves of radius R, the percentage reduction of gradient, is (A) 50/R (B) 75/R (C) 100/R (D) 125/R

Description : To compensate the loss of tractive force of vehicles along curves of radius R, the percentage reduction of gradient, is (A) 50/R (B) 75/R (C) 100/R (D) 125/R

Last Answer : Answer: Option B

In alluvial channels carrying clear water, the ratio of maximum tractive shear stress on the slides and that on the channel beams approximately. a) 0.5 b) 1.76 c) 0.76 d) 1.5

Description : In alluvial channels carrying clear water, the ratio of maximum tractive shear stress on the slides and that on the channel beams approximately. a) 0.5 b) 1.76 c) 0.76 d) 1.5

Last Answer : c) 0.76