A twist drill is a :

 A twist drill is a : (A) side cutting tool (B) front cutting tool (C) end cutting tool (D) none of these
by

1 Answer

Answer :

 A twist drill is a : end cutting tool 
by

Related questions

The most suitable refrigerant for a commercial ice plant is :

Description : The most suitable refrigerant for a commercial ice plant is : (A) brine (B) NH3 (C) Freon (D) air

Last Answer : Ammonia NH3

Dew point temperature is constant as long as there is :

Description : Dew point temperature is constant as long as there is : (A) no change in moisture content of the air (B) no change in volume of air (C) no change in dry bulb and wet bulb temperature (D) no change in relative and specific humidity of air

Last Answer : Dew point temperature is constant as long as there is : no change in moisture content of the air

The comfort conditions in air conditioning are :

Description : The comfort conditions in air conditioning are : (A) 22 ºC dry bulb temperature and 60% relative humidity (B) 25 ºC dry bulb temperature and 100% relative humidity (C) 20º C dry bulb temperature and 75% relative humidity (D) 15º C bulb temperature and 80% relative humidity

Last Answer : The comfort conditions in air conditioning are : 22 ºC dry bulb temperature and 60% relative humidity 

Air is normally dehumidified by :

Description : Air is normally dehumidified by : (A) injecting water (B) passing steam (C) heating (D) cooling

Last Answer : 1

A fluid in equilibrium cannot sustain :

Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress

Last Answer : A fluid in equilibrium cannot sustain : shear stress 

Euler’s dimensionless number relates the following :

Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force

Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force

Power transmitted through a pipe is maximum when the loss of head due to friction is :

Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero

Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied 

The efficiency of a centrifugal pump is maximum when its blades are :

Description : The efficiency of a centrifugal pump is maximum when its blades are : (A) straight (B) bent forward (C) bent backward (D) bent forward first and then backward

Last Answer : The efficiency of a centrifugal pump is maximum when its blades are : bent backward

In axial flow fans and turbines, fluid enters and leaves as follows :

Description :  In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Last Answer : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Military type of organisation is known as :

Description : Military type of organisation is known as : (A) line organisation (B) functional organisation (C) line and staff organisation (D) line, staff and functional organisation 

Last Answer : Military type of organisation is known as : line organisation

A systematic job improvement sequence will consist of :

Description : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Last Answer : A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

Production cost refers to prime cost plus :

Description : Production cost refers to prime cost plus : (A) factory overheads (B) factory and administration overheads (C) factory, administration and sales overheads (D) factory, administration, sales overheads and profit

Last Answer : Production cost refers to prime cost plus : factory overheads

In inventory control theory, the economic order quantity is :

Description : In inventory control theory, the economic order quantity is : (A) average level of inventory (B) optimum lot size (C) capacity of a warehouse (D) lost size corresponding to break-even analysis

Last Answer : In inventory control theory, the economic order quantity is : optimum lot size 

In value engineering, the term value refers to :

Description : In value engineering, the term value refers to : (A) manufacturing cost of the product (B) selling price of the product (C) total cost of the product (D) utility of the product

Last Answer : In value engineering, the term value refers to : utility of the product

The main object of scientific layout is :

Description : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Last Answer : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Gantt chart is used for :

Description : Gantt chart is used for : (A) inventory control (B) material handling (C) production schedule (D) machine repair schedules

Last Answer : Gantt chart is used for :  production schedule

Tool life is most affected by :

Description : Tool life is most affected by : (A) cutting speed (B) tool geometry (C) feed and depth (D) microstructure of material being cut

Last Answer : Tool life is most affected by : cutting speed 

The usual ratio of forward and return stroke in shaper is :

Description : The usual ratio of forward and return stroke in shaper is : (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2

Last Answer : The usual ratio of forward and return stroke in shaper is :  3:2

Binding material used in cemented carbide tools is :

Description : Binding material used in cemented carbide tools is : (A) Nickel (B) Cobalt (C) Chromium (D) Silicon

Last Answer : Binding material used in cemented carbide tools is : Cobalt 

Angle between the shear plane and work surface is known as :

Description : Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle

Last Answer : Angle between the shear plane and work surface is known as : shear angle

Material having highest cutting speed is :

Description : Material having highest cutting speed is : (A) Cast iron (B) Bronze (C) Aluminium (D) High carbon steel

Last Answer : Material having highest cutting speed is : Aluminium

If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is

Description : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : ... at the first one (C) One fourth of the first one (D) One and half times the first one

Last Answer : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : One fourth of the first one

The train value of a gear train is :

Description : The train value of a gear train is : (A) equal to velocity ratio (B) reciprocal of velocity ratio (C) always greater than unity (D) none of the above

Last Answer : The train value of a gear train is : reciprocal of velocity ratio

The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as :

Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor

Last Answer : Magnification Factor

Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting

Description : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : (A) 2:3 (B) 3:5 (C) 3:2 (D) 7:4

Last Answer : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : 2:3

A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as

Description : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab

Last Answer : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as Sand wash

The property of sand due to which the sand grains stick together, is called

Description : The property of sand due to which the sand grains stick together, is called 1. Collapsibility 2. Permeability 3. Cohesiveness 4. Adhesiveness

Last Answer : The property of sand due to which the sand grains stick together, is called Cohesiveness 

In die casting, machining allowance is

Description : In die casting, machining allowance is 1. Small 2. Large 3. Very large 4. Not provided

Last Answer : In die casting, machining allowance is Not provided

The mode of deformation of the metal during spinning is

Description : The mode of deformation of the metal during spinning is 1.Bending 2.Stretching 3.Bending and stretching 4.Rolling and stretching

Last Answer : The mode of deformation of the metal during spinning is Bending and stretching

Structural sections such as rails, angles, I-beams are made by

Description : Structural sections such as rails, angles, I-beams are made by 1. Hot rolling 2. Hot drawing 3. Hot piercing 4. Hot extrusion

Last Answer : Structural sections such as rails, angles, I-beams are made by Hot rolling

The process extensively used for making bolts and nuts is

Description : The process extensively used for making bolts and nuts is 1. Hot piercing 2. Extrusion 3. Cold peening 4. Cold heading

Last Answer : The process extensively used for making bolts and nuts is Cold heading

The cold chisels are made by

Description : The cold chisels are made by 1. Drawing 2. Rolling 3. Forging 4. Piercing

Last Answer : The cold chisels are made by Forging 

Welding of glass is done by

Description : Welding of glass is done by 1. Ultrasonic welding 2. Electron beam welding 3. Laser beam welding 4. Explosive welding

Last Answer : Welding of glass is done by Laser beam welding

Linde welding uses

Description : Linde welding uses 1.Neutral flame and rightward technique 2.Carburizing flame and rightward technique 3.Neutral flame and leftward technique 4.Oxidizing flame and leftward technique

Last Answer : Linde welding uses Carburizing flame and rightward technique

What movie plot twist had you rooting for the bad guy the whole time?

Description : What movie plot twist had you rooting for the bad guy the whole time?

Last Answer : Anything with superheros

Have you seen the re-branding of Pepsi's Sierra Mist as "Mist Twist" in your area yet?

Description : Have you seen the re-branding of Pepsi's Sierra Mist as "Mist Twist" in your area yet?

Last Answer : No, but I sampled the new 1893 Pepsi just yesterday. Awful! I’ve never liked Pepsi in any of its forms. I’m strictly a Dr. Pepper and Coca-Cola man.

What do you call the roll of plastic bags with twist ties that you use to put fruits and vegetables in the grocery isle?

Description : What do you call the roll of plastic bags with twist ties that you use to put fruits and vegetables in the grocery isle?

Last Answer : The roll of plastic bags with twist ties that you use to put fruits and vegetables in the grocery isle. Here’s a technique: lick one of your fingers and put the end of the bag between them, then slide your fingers. After that, fluff out the bag to get it open.

You've just been given a life sentence. The twist? You have to choose your own cellmate.

Description : You've just been given a life sentence. The twist? You have to choose your own cellmate.

Last Answer : ~I would pick someone who knows how to escape prisons…

For those who work with fiber, yarn and thread, how do you know if you are working with a Z-twist or an S-twist and why does it matter?

Description : For those who work with fiber, yarn and thread, how do you know if you are working with a Z-twist or an S-twist and why does it matter?

Last Answer : I’m not too knowledgable on this, but I know S and Z twist just refer to the direction of the twist, and I don’t think that’s what’s causing your problem. It sounds like the yarn is overspun. Is it handspun? Sounds like the spinner might not be very experienced.

Have you ever invented a new and unique game (or strange twist on an old game)

Description : Have you ever invented a new and unique game (or strange twist on an old game)

Last Answer : Well I designed a browser MMORPG but I haven’t gotten it working yet :(

Donate to your favorite charity with a twist...

Description : Donate to your favorite charity with a twist...

Last Answer : sorry to those that already aswered when this was in general. Moderators requested it be moved to social.

ask-public MacGyvers: I need to open an old fashioned bottle-capped bottle, not a twist off, no bottle opener, can you help?

Description : ask-public MacGyvers: I need to open an old fashioned bottle-capped bottle, not a twist off, no bottle opener, can you help?

Last Answer : I see so much shit listed up above and I ask you this one question: Do you have a counter top in your bathroom? If so here is what you do. 1. Place edge of bottle cap on the edge of counter top ... can be found on motel TV's. PS- I hope they are the Orange Aranciatas. They are sooooo good. xoxoxo

What gets your knickers in a twist?

Description : What gets your knickers in a twist?

Last Answer : I hate to be instructed on what to say and how to say it by arrogant Flutherites who appoint themselves hall monitors. It makes me want to splatter the walls with blood.

Why do my baking sheets twist in the oven?

Description : Why do my baking sheets twist in the oven?

Last Answer : Better quality baking sheets would probably warp less. Your oven may have hot spots and cool spots , causing your baking sheet to expand/contract unevenly, which creates the twisting effect. This ... upgrading the oven, or at least rotating your baked goods half way through cooking. Good luck!

Does anyone think fellipe massa's crash was a cruel twist of fate?

Description : Does anyone think fellipe massa's crash was a cruel twist of fate?

Last Answer : I looked up the story and all I can say is his helmet saved his life. Welcome to Fluther

What character in the book Oliver Twist by Charles Dickens impacted your life the most?

Description : What character in the book Oliver Twist by Charles Dickens impacted your life the most?

Last Answer : Well, yours seems obvious. I’ve always felt an affinity for Rose, for her dedication to what is probably a lost cause.

Can someone give me an idea for a twist on the traditional meatloaf?

Description : Can someone give me an idea for a twist on the traditional meatloaf?

Last Answer : Worschesthsckther sauce. Or however its spelled. My aunt makes a meatloaf that mixes that and ketchup, and it’s delicious.

Why do American beers have twist-off tops?

Description : Why do American beers have twist-off tops?

Last Answer : answer:Many american craft beers are not twist-offs. East Coast has Sam Adams, west coast has a bunch of the Washingtom/Oregon beers. I guess the big breweries (BudMillerCoors) are shooting for convenience, and the little ones not so much. Returnable bottles are not twist-off.

How do you twist your words to sound good?

Description : How do you twist your words to sound good?

Last Answer : like making it sound like the teacher is teaching when they really aren't while not lying

why do hawthorn trunks twist? Is the trunk twisting or just the bark?

Description : why do hawthorn trunks twist? Is the trunk twisting or just the bark?

Last Answer : Need Answer