Pick up the correct statement from the following: (A) An artificial barrier which makes the enclosed area safe for anchorage of ships, is known as break water (B) The break water whose inside is used as a platform for loading and unloading is called a mole (C) The length of the quay wall is governed by the length of the largest vessel likely to be berthed (D) All the abov

Pick up the correct statement from the following:
(A) An artificial barrier which makes the enclosed area safe for anchorage of ships, is known as
break water
(B) The break water whose inside is used as a platform for loading and unloading is called a
mole
(C) The length of the quay wall is governed by the length of the largest vessel likely to be
berthed
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is used for loading and unloading of cargo is called quay wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Last Answer : (D) All of the above

Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of the vertical face of a guay wall, is called fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Description : Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of ... fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Last Answer : (D) All the above

Consider the following statements. (i) Fender is the cushion provided on the face of the jetty for ships to come in contact, (ii) Slip is the space of water area between two adjacent piers where ships are berthed, (iii) Pier head is a structure constructed near the tip of break water near the harbour entrance. Of the statements (A) (i) and (ii) are correct (B) (ii) and (iii) are correct (C) (i) and (iii) are correct (D) (i), (ii) and (iii) are correct

Description : Consider the following statements. (i) Fender is the cushion provided on the face of the jetty for ships to come in contact, (ii) Slip is the space of water area between two adjacent piers where ships are berthed, ... correct (C) (i) and (iii) are correct (D) (i), (ii) and (iii) are correct

Last Answer : (D) (i), (ii) and (iii) are correct

In which of the following operations Continuous Path System is used (A) Pick and Place (B) Loading and Unloading (C) Continuous welding

Description : In which of the following operations Continuous Path System is used (A) Pick and Place (B) Loading and Unloading (C) Continuous welding

Last Answer : C

A dock: (A) Is a marine structure for berthing of vessels for loading and unloading cargo and passengers (B) Is provided with a dock gate (C) Is provided with an arrangement to pump out water when required (D) All the above

Description : A dock: (A) Is a marine structure for berthing of vessels for loading and unloading cargo and passengers (B) Is provided with a dock gate (C) Is provided with an arrangement to pump out water when required (D) All the above

Last Answer : (D) All the above

What should be done to ensure that you are at the correct job assignment before loading or unloading?

Description : What should be done to ensure that you are at the correct job assignment before loading or unloading?

Last Answer : Feel Free to Answer

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is called sounding (C) The contour lines on the bed of a water body are called fathoms (D) All the abov

Description : Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is ... (C) The contour lines on the bed of a water body are called fathoms (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The first coat of stucco plaster is called scratch coat (B) The second coat of stucco plaster is called brown coat (C) The third coat of stucco plaster is called white coat (D) All the abov

Description : Pick up the correct statement from the following: (A) The first coat of stucco plaster is called scratch coat (B) The second coat of stucco plaster is called brown coat (C) The third coat of stucco plaster is called white coat (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Spring tides are caused at new and full moon (B) Neap tides are caused when the moon is in her quarters (C) Spring tides are roughly twice the height of neap tides (D) All of the abov

Description : Pick up the correct statement from the following: (A) Spring tides are caused at new and full moon (B) Neap tides are caused when the moon is in her quarters (C) Spring tides are roughly twice the height of neap tides (D) All of the abov

Last Answer : (D) All of the above

Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king post is made by making tenon and mortise respectively (C) Joint between strut and king post, is generally of mortise and tenon type (D) All the abov

Description : Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king ... ) Joint between strut and king post, is generally of mortise and tenon type (D) All the above

Last Answer : Answer: Option D

From the following which is not the application of AGV. a.Truck loading and unloading b.To change the tool c.Material transfer d.Paper roll transfer

Description : From the following which is not the application of AGV. a.Truck loading and unloading b.To change the tool c.Material transfer d.Paper roll transfer

Last Answer : b.To change the tool

From Which of the following is application of robot. (A) Welding (B) Machine loading & unloading (C) Both (A) & (B) (D) None of the above

Description : From Which of the following is application of robot. (A) Welding (B) Machine loading & unloading (C) Both (A) & (B) (D) None of the above

Last Answer : C

Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Description : Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Last Answer : b) Reducing loss of traction

Which of these is not an essential feature of a market (a) Buyers ; (b) Sellers ; (c) Commodity ; (d) Building with loading and unloading facilities

Description : Which of these is not an essential feature of a market (a) Buyers ; (b) Sellers ; (c) Commodity ; (d) Building with loading and unloading facilities

Last Answer : (d) Building with loading and unloading facilities

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The vertical compression members are generally known as columns or stanchions (C) Deflection in lateral direction of a long column, is generally known as buckling (D) All the above

Description : Pick up the correct statement from the following:  (A) The structural member subjected to compression and whose dimensions are small as  compared to its length, is called a stmt  (B) The ... in lateral direction of a long column, is generally known as buckling  (D) All the above

Last Answer : (D) All the above

Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option C

Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option B

Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity force, and wave making effects, as with ship's hulls (D) All of the above

Description : Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through ... gravity force, and wave making effects, as with ship's hulls (D) All of the above

Last Answer : Answer: Option A

A ship is berthed in a chamber and lifted by principles of buoyancy, such a chamber is called. (A) Dry dock (B) Wet dock (C) Floating dock (D) Refuge dock

Description : A ship is berthed in a chamber and lifted by principles of buoyancy, such a chamber is called. (A) Dry dock (B) Wet dock (C) Floating dock (D) Refuge dock

Last Answer : (C) Floating dock

Pick up the correct statement from the following: (A) Central portion of a cyclone acts as a chimney through which air gets lifted (B) Cyclonic precipitation caused by a warm front is generally continuous (C) Greatest amount of orographic precipitation falls in the windward side of the barrier (D) All the above

Description : Pick up the correct statement from the following: (A) Central portion of a cyclone acts as a chimney through which air gets lifted (B) Cyclonic precipitation caused by a warm front is ... Greatest amount of orographic precipitation falls in the windward side of the barrier (D) All the above

Last Answer : Option D

Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Description : Referring of given figure, pick up the correct statement from the following: (A) The total length of centre line of four walls is 20 m (B) Length of long wall out-to-out is 6.80 m (C) Length of short walls in-to-in is 3.20 m (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b)(D) Both (a) and (b

Description : Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b) (D) Both (a) and (b

Last Answer : (D) Both (a) and (b

Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Description : Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Which of the following statement is correct ? (1) Ovules are not enclosed by ovary wall in gymnosperms (2) Selaginella is heterosporous, while Salvinia is homosporous (3) Horsetails are gymnosperms (4) Stems are usually unbranched in both Cycas and Cedrus

Description : Which of the following statement is correct ? (1) Ovules are not enclosed by ovary wall in gymnosperms (2) Selaginella is heterosporous, while Salvinia is homosporous (3) Horsetails are gymnosperms (4) Stems are usually unbranched in both Cycas and Cedrus

Last Answer : (1) Ovules are not enclosed by ovary wall in gymnosperms

Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so proportioned that it may not overturn by the lateral pressure (C) The retaining wall should be safe against sliding (D) To drain off water from the earth retained, weep holes are provided near the top of the retaining wall

Description : Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so ... off water from the earth retained, weep holes are provided near the top of the retaining wall

Last Answer : Answer: Option D

The loading dose of a drug is governed by its: A. Renal clearance B. Plasma half life C. Volume of distribution D. Elimination rate constant

Description : The loading dose of a drug is governed by its: A. Renal clearance B. Plasma half life C. Volume of distribution D. Elimination rate constant

Last Answer : C. Volume of distribution

The loading dose of a drug is governed by its: A. Renal clearance B. Plasma half life C. Volume of distribution D. Elimination rate constant

Description : The loading dose of a drug is governed by its: A. Renal clearance B. Plasma half life C. Volume of distribution D. Elimination rate constant

Last Answer : C. Volume of distribution

For a long uncompensated line the limit to the line loading ill governed by?

Description : For a long uncompensated line the limit to the line loading ill governed by?

Last Answer : For a long uncompensated line the limit to the line loading ill governed by stability limit.

The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Description : The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Last Answer : [ B ] Development length

The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Description : The length of bar necessary to develop the full strength of the bar is called [ A ] Bond [ B ] Development length [ C ] End anchorage [ D ] Splicing

Last Answer : [ B ] Development length

The dock wall is designed as a gravity retaining wall and is tested for (A) Back fill pressure when the dock is empty (B) Maximum water pressure from the dock without any back fill (C) The load charge transmitted to the dock by the movement of loaded vehicles or trains on the way (D) All of the abov

Description : The dock wall is designed as a gravity retaining wall and is tested for (A) Back fill pressure when the dock is empty (B) Maximum water pressure from the dock without any back fill (C) The load charge ... to the dock by the movement of loaded vehicles or trains on the way (D) All of the above

Last Answer : (D) All of the above

The minimum diameter of turning besin, where ships turn by going ahead and without tug assistance should be (A) L (B) 1.5 L (C) 2.0 L (D) 4.0 L L he length of the largest ship to use the port

Description : The minimum diameter of turning besin, where ships turn by going ahead and without tug assistance should be (A) L (B) 1.5 L (C) 2.0 L (D) 4.0 L L he length of the largest ship to use the port

Last Answer : (D) 4.0 L

A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Description : A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Last Answer : c. Combustion, transfers

Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, is known as a plane wave (C) The relative phase difference between the waves is important and not the absolute phase of a point on the wave (D) All of these

Description : Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, ... waves is important and not the absolute phase of a point on the wave (D) All of these

Last Answer : Answer: Option D

Which of the following electric motors would be the safest and most reliable to use on the main deck of a vessel in foul weather conditions? A. Sealed motors B. Drip proof motors C. Enclosed motors D. Watertight motors

Description : Which of the following electric motors would be the safest and most reliable to use on the main deck of a vessel in foul weather conditions? A. Sealed motors B. Drip proof motors C. Enclosed motors D. Watertight motors

Last Answer : Answer: D

Boiler is a enclosed vessel that provides a) Expansion b) Ignition c) Combustion d) None of the above

Description : Boiler is a enclosed vessel that provides a) Expansion b) Ignition c) Combustion d) None of the above

Last Answer : c) Combustion

Can you write me the lyrics of Wellhello Quay?

Description : wellhello quay lyrics.

Last Answer : I really like them and this number too. Here's the lyrics: If I knew how much love the quay could hold now I'd take it with me to the pebbles if I knew how many more pictures would fit in the summer ... it with me if I knew how many pictures would fit in the summer I'd stay with you for every flash

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

Which of the following statements is correct? (a) Ovules are not enclosed by ovary wall in gymnosperms. (b) Selaginella is heterosporous, while Salvinia is homosporous. (c) Horsetails are gymnosperms. (d) Stems are usually unbranched in both Cycas and Cedrus.

Description : Which of the following statements is correct? (a) Ovules are not enclosed by ovary wall in gymnosperms. (b) Selaginella is heterosporous, while Salvinia is homosporous. (c) Horsetails are gymnosperms. (d) Stems are usually unbranched in both Cycas and Cedrus.

Last Answer : (a) Ovules are not enclosed by ovary wall in gymnosperms.

How can we calculate the safe anchorage of a life-line?

Description : How can we calculate the safe anchorage of a life-line?

Last Answer : When life line is used they shall be fastened to fixed safe points of anchorage capable of supporting 2300 Kgs. shall be independent, and shall be protected from sharp edges and abrasion. Safe ... greater than 30cm (12 Inch) for every 10 meters of lifeline length between attachments points.  

Where is the ship's anchor located on a 16th or early 17th century vessel?

Description : Where is the ship's anchor located on a 16th or early 17th century vessel?

Last Answer : From what I know about sailboats, it would have to be fore so the boat can drift backward and “set” the anchor.

The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency switchboard B. emergency generator supply to the main switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Description : The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency ... switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Last Answer : Answer: A

A vessel is equipped with two ship's service generators. Generator #1 is rated at 900 kw and generator #2 is rated at 600 kw. During parallel operation, with a hotel load of 1,000 kw, what should be the kw load on generator #2? A. 100 kw B. 400 kw C. 500 kw D. 600 kw

Description : A vessel is equipped with two ship's service generators. Generator #1 is rated at 900 kw and generator #2 is rated at 600 kw. During parallel operation, with a hotel load of 1,000 kw, what should be the kw load on generator #2? A. 100 kw B. 400 kw C. 500 kw D. 600 kw

Last Answer : Answer: B