According to Highway Research Board of U.S.A. practical land width, is (A) 2.7 m (B) 3.0 m (C) 3.3 m (D) 3.6 m

According to Highway Research Board of U.S.A. practical land width, is
(A) 2.7 m
(B) 3.0 m
(C) 3.3 m
(D) 3.6 m
by

1 Answer

Answer :

Answer: Option D
by

Related questions

According to the recommendations of Nagpur Conference, the width formation of an ideal National Highway in hard rock cutting, is (A) 8.9 m (B) 7.9 m (C) 6.9 m (D) 6.5 m

Description : According to the recommendations of Nagpur Conference, the width formation of an ideal National Highway in hard rock cutting, is (A) 8.9 m (B) 7.9 m (C) 6.9 m (D) 6.5 m

Last Answer : Answer: Option B

According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Description : According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Last Answer : Answer: Option D

The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Description : The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Last Answer : Answer: Option A

The minimum width of the pavement of a National Highway should be (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Description : The minimum width of the pavement of a National Highway should be (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Last Answer : Answer: Option B

The full width of land acquired before finalising a highway, alignment is known (A) Width of formation (B) Right of way (C) Carriage way (D) Roadway

Description : The full width of land acquired before finalising a highway, alignment is known (A) Width of formation (B) Right of way (C) Carriage way (D) Roadway

Last Answer : Answer: Option B

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

Highway Research Board (HRB) classification of soils is based on (A) Particle size composition (B) Plasticity characteristics (C) Both particle size composition and plasticity characteristics (D) None of the above

Description : Highway Research Board (HRB) classification of soils is based on (A) Particle size composition (B) Plasticity characteristics (C) Both particle size composition and plasticity characteristics (D) None of the above

Last Answer : (C) Both particle size composition and plasticity characteristics

According to Indian Road Congress, the width of carriageway, is(A) 3.75 m for single lane (B) 7.0 m for two lanes without raised kerbs (C) 7.5 m for two lanes with raised kerbs (D) All the above

Description : According to Indian Road Congress, the width of carriageway, is (A) 3.75 m for single lane (B) 7.0 m for two lanes without raised kerbs (C) 7.5 m for two lanes with raised kerbs (D) All the above

Last Answer : Answer: Option D

If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Description : If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Last Answer : (B) Bd + Sd2

According to the recommendations of International Navigational Congress in 1912, the ratio of length to width at the entrance for cargo vessels is (A) 5.5 and 6.0 to 1 (B) 6.2 and 6.8 to 1 (C) 7.4 and 7.8 to 1 (D) 8.2 and 8.5 to 1

Description : According to the recommendations of International Navigational Congress in 1912, the ratio of length to width at the entrance for cargo vessels is (A) 5.5 and 6.0 to 1 (B) 6.2 and 6.8 to 1 (C) 7.4 and 7.8 to 1 (D) 8.2 and 8.5 to 1

Last Answer : (C) 7.4 and 7.8 to 1

An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is (A) Safe in shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Description : An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is ( ... shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Last Answer : Answer: Option A

The normal road land width for a major district road in open area, is (A) 45 m (B) 25 m (C) 15 m (D) 12 m

Description : The normal road land width for a major district road in open area, is (A) 45 m (B) 25 m (C) 15 m (D) 12 m

Last Answer : Answer: Option B

The width of pavement in addition to a gravelled berm 1 m on either side for a two directional traffic recommended by Nagpur Conference of Chief Engineers, is (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Description : The width of pavement in addition to a gravelled berm 1 m on either side for a two directional traffic recommended by Nagpur Conference of Chief Engineers, is (A) 4.7 m (B) 5.7 m (C) 6.7 m (D) 7.7 m

Last Answer : Answer: Option C

Normal formation width of a hill road for one-way traffic, is (A) 3.6 m (B) 4.8 m (C) 6.6 m (D) 7.2 m

Description : Normal formation width of a hill road for one-way traffic, is (A) 3.6 m (B) 4.8 m (C) 6.6 m (D) 7.2 m

Last Answer : Answer: Option B

According to the recommendations of International Navigational Congress in 1912, the ratio of length to width at the entrance for passenger vessels is: (A) 7.25 to 1 (B) 7.80 to 1 (C) 8.11 to 1 (D) 8.44 to 1

Description : According to the recommendations of International Navigational Congress in 1912, the ratio of length to width at the entrance for passenger vessels is: (A) 7.25 to 1 (B) 7.80 to 1 (C) 8.11 to 1 (D) 8.44 to 1

Last Answer : (D) 8.44 to 1

If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Description : If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : Answer: Option D

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Description : Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Last Answer : Answer: Option C

Permissible width of crack at the surface of concrete for „moderate‟ environmental conditions according to IS : 456-2000 is [ A ] 0.1 mm [ B ] 0.2 mm [ C ] 0.3 mm [ D ] 0.4 mm

Description : Permissible width of crack at the surface of concrete for „moderate‟ environmental conditions according to IS : 456-2000 is [ A ] 0.1 mm [ B ] 0.2 mm [ C ] 0.3 mm [ D ] 0.4 mm

Last Answer : [ B ] 0.2 mm

According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Description : According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Last Answer : [ D ] 0.3

According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Description : According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Last Answer : [ D ] 0.3

A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Description : A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Last Answer : Answer: Option D

Will the discovery and subsequent research into gravity waves help with the invention of the hover board that, according to Back to the Future, we were supposed to have by last year?

Description : Will the discovery and subsequent research into gravity waves help with the invention of the hover board that, according to Back to the Future, we were supposed to have by last year?

Last Answer : Gravity waves were predicted by Einstein back when speculation was rampant about the possible existence of black holes. What makes you think that a device is in our future capable of generating a wave ... franchise. Hover boards all over the place while all the cars roll around on primitive wheels.

Formation width for banks for B.G. single line section is (a) 6.10 m (b) 6.50 m (c) 6.85 m* (d) 7.0 m

Description : Formation width for banks for B.G. single line section is (a) 6.10 m (b) 6.50 m (c) 6.85 m* (d) 7.0 m

Last Answer : (c) 6.85 m*

How expensive is it to post a billboard advertisement along a U.S. interstate highway?

Description : How expensive is it to post a billboard advertisement along a U.S. interstate highway?

Last Answer : The average cost for posting a billboard on any major highway can run anywhere from $600.00 to $2,500 a month. They can even run higher depending on the size and the location.

If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : Answer: Option C

In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Description : In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Last Answer : Answer: Option D

The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Last Answer : Answer: Option C

If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Last Answer : Answer: Option C

For a 6.6 m wide two lane pavement, berms are provided on either side having a width of (A) 1.00 m (B) 1.25 m (C) 1.50 m (D) 1.75 m

Description : For a 6.6 m wide two lane pavement, berms are provided on either side having a width of (A) 1.00 m (B) 1.25 m (C) 1.50 m (D) 1.75 m

Last Answer : Answer: Option C

If the number of lanes on the carriageway of a road is more than two, the total width of lane ways is equal to 3.0 m (A) + 0.60 m (B) + 0.70 m (C) + 0.90 m (D) + 1.50 m

Description : If the number of lanes on the carriageway of a road is more than two, the total width of lane ways is equal to 3.0 m (A) + 0.60 m (B) + 0.70 m (C) + 0.90 m (D) + 1.50 m

Last Answer : Answer: Option B

The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient of the embankment is 1 in 150, the quantity of the earthwork calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Description : The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient ... calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Last Answer : (B) 3225 m3

For hydraulically efficient rectangular channel of bed width 4.0 m, the depth of flow is (a) 4 m (b) 0.5 m (c) 1 m (d) 2 m

Description : For hydraulically efficient rectangular channel of bed width 4.0 m, the depth of flow is (a) 4 m (b) 0.5 m (c) 1 m (d) 2 m

Last Answer : (d) 2 m

Switch Board Wiring Practical

Description : Switch Board Wiring Practical

Last Answer : Practical Significance Switch board wiring is very important. Improper connections of neutral and live (phase) wire in a switch board is dangerous and leads to electric shock while maintenance work. ... Connect upper plate to the box with screws. j. Test the board with test lamp.

If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Description : If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Last Answer : Answer: Option D

The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is A. 5 m B. 5.5 m C. 6.5 m D. 7 m

Description : The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is A. 5 m B. 5.5 m C. 6.5 m D. 7 m

Last Answer : ANS: D

A practical formula for determining the thickness of insulation between low voltage and high voltage windings is (a) 1 + 0.2 kVmm (6) 2 + 0.5 kVmm (c) 4 + 0.7 kV mm (d) 5 + 0.9 kV mm

Description : A practical formula for determining the thickness of insulation between low voltage and high voltage windings is (a) 1 + 0.2 kVmm (6) 2 + 0.5 kVmm (c) 4 + 0.7 kV mm (d) 5 + 0.9 kV mm

Last Answer : (d) 5 + 0.9 kV mm

Soil classification of composite soils, exclusively based on the particle size distribution, is known (A) Particle classification (B) Textural classification (C) High Way Research Board classification (D) Unified soil classification

Description : Soil classification of composite soils, exclusively based on the particle size distribution, is known (A) Particle classification (B) Textural classification (C) High Way Research Board classification (D) Unified soil classification

Last Answer : Answer: Option B

For general engineering purposes, soils are classified by (A) Particle size classification system (B) Textural classification system (C) High Way Research Board (HRB), classification system (D) Unified soil classification system

Description : For general engineering purposes, soils are classified by (A) Particle size classification system (B) Textural classification system (C) High Way Research Board (HRB), classification system (D) Unified soil classification system

Last Answer : Answer: Option D

What is the width of meter gauge railway line in India? A. 2 m B. 1.7 m C. 1 m D. 0.7 m

Description : What is the width of meter gauge railway line in India? A. 2 m B. 1.7 m C. 1 m D. 0.7 m

Last Answer : C [1 m]

Following are the elements of research critique EXCEPT ONE; a. Methodological dimensions b. Practical dimensions c. Ethical dimensions d. Interpretive dimensions

Description : Following are the elements of research critique EXCEPT ONE; a. Methodological dimensions b. Practical dimensions c. Ethical dimensions d. Interpretive dimensions

Last Answer : b. Practical dimensions

Sources of researchable problems can include: a. Researchers’ own experiences as educators b. Practical issues that require solutions c. Theory and past research d. All of the above

Description : Sources of researchable problems can include: a. Researchers’ own experiences as educators b. Practical issues that require solutions c. Theory and past research d. All of the above

Last Answer : d. All of the above

Generally the objective of organizing a workshop is Options: A) To develop the research attitude in the researchers B) To tell about the research methodology to the neo-researchers C) To impart practical training of conducting research D) None of the above

Description : Generally the objective of organizing a workshop is Options: A) To develop the research attitude in the researchers B) To tell about the research methodology to the neo-researchers C) To impart practical training of conducting research D) None of the above

Last Answer : C) To impart practical training of conducting research 

The main objective of organizing a workshop is Options: A) To improve the skills of the researchers in order to solve the specific problem B) To impart practical training to the researchers C) To make perfect the researchers in an area of research D) All of the above

Description : The main objective of organizing a workshop is Options: A) To improve the skills of the researchers in order to solve the specific problem B) To impart practical training to the researchers C) To make perfect the researchers in an area of research D) All of the above

Last Answer : D) All of the above 

The characteristic feature of a workshop is Options: A) To attain the higher cognitive and Psychomotor objectives of the research B) To comprehend the theoretical and practical aspects of the research C) To explore the possibilities of applied aspects of the research D) All of the above

Description : The characteristic feature of a workshop is Options: A) To attain the higher cognitive and Psychomotor objectives of the research B) To comprehend the theoretical and practical aspects of the research C) To explore the possibilities of applied aspects of the research D) All of the above

Last Answer : D) All of the above

When planning to do a social research, it is better to (A) Approach the topic with an open mind (B) Do a pilot study before getting stuck into it (C) Be familiar with literature on the topic (D) Forget about theory because this is a very practical

Description : When planning to do a social research, it is better to (A) Approach the topic with an open mind (B) Do a pilot study before getting stuck into it (C) Be familiar with literature on the topic (D) Forget about theory because this is a very practical

Last Answer : (A) Approach the topic with an open mind

If is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is (A) 0.3 H(B) 0.4 H(C) 0.5 H(D) 0.7 H

Description : If is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is (A) 0.3 H (B) 0.4 H (C) 0.5 H (D) 0.7 H

Last Answer : Answer: Option D

In a cantilever retaining wall without a heel slab (A) Thickness of the stem is kept same throughout (B) Base slab is made 10 cm thicker than the stem (C) Width of the base slab is kept 0.7 time the total height of the wall (D) All the above

Description : In a cantilever retaining wall without a heel slab (A) Thickness of the stem is kept same throughout (B) Base slab is made 10 cm thicker than the stem (C) Width of the base slab is kept 0.7 time the total height of the wall (D) All the above

Last Answer : Answer: Option D

How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Description : How much will the length of a 1.0 km section of concrete highway change if the temperature varies from -15˚C in winter to 41˚C in summer?  a. 0.67 m  b. 2.2 m  c. 3.1 m  d. 0.47 m

Last Answer : 0.67 m

When making a location location decision decision at the country country level, which of these would be considered? a. corporate corporate desires desires b. land/construction costs land/construction costs c. air, rail, highway, highway, waterway waterway systems systems d. zoning restrictions restrictions e. location of markets

Description : When making a location location decision decision at the country country level, which of these would be considered? a. corporate corporate desires desires b. land/construction costs land/ ... , highway, waterway waterway systems systems d. zoning restrictions restrictions e. location of markets

Last Answer : e. location of markets