The normal road land width for a major district road in open area, is (A) 45 m (B) 25 m (C) 15 m (D) 12 m

The normal road land width for a major district road in open area, is
(A) 45 m
(B) 25 m
(C) 15 m
(D) 12 m
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Description : The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Last Answer : Answer: Option A

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

The width of different roads as recommended in Nagpur plan by the Indian Road Conference for hilly region, is (A) Same for National Highways (B) Different for National Highways (C) Same for State Highways (D) Same for Major District roads

Description : The width of different roads as recommended in Nagpur plan by the Indian Road Conference for hilly region, is (A) Same for National Highways (B) Different for National Highways (C) Same for State Highways (D) Same for Major District roads

Last Answer : Answer: Option B

On the recommendations of Nagpur Conference, the minimum width of a village road may be (A) 2.45 m (B) 2.75 m (C) 3.66 m (D) 4.90 m

Description : On the recommendations of Nagpur Conference, the minimum width of a village road may be (A) 2.45 m (B) 2.75 m (C) 3.66 m (D) 4.90 m

Last Answer : Answer: Option A

According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Description : According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Last Answer : Answer: Option D

An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is (A) Safe in shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Description : An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is ( ... shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined members (D) Needs revision of the section

Last Answer : Answer: Option A

Normal formation width of a hill road for one-way traffic, is (A) 3.6 m (B) 4.8 m (C) 6.6 m (D) 7.2 m

Description : Normal formation width of a hill road for one-way traffic, is (A) 3.6 m (B) 4.8 m (C) 6.6 m (D) 7.2 m

Last Answer : Answer: Option B

The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Description : The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Last Answer : Answer: Option C

The minimum road width is taken (A) 9 m (B) 12 m (C) 16 m (D) 20 m

Description : The minimum road width is taken (A) 9 m (B) 12 m (C) 16 m (D) 20 m

Last Answer : Answer: Option A

A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Description : A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Description : The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is (A) 20 cm (B) 25 cm (C) 30 cm (D) 35 cm

Last Answer : Answer: Option C

Roadway width for a National highways and State highways (two-lanes) is (A) 12 m (B) 9 m (C) 9.5 m (D) 15 m

Description : Roadway width for a National highways and State highways (two-lanes) is (A) 12 m (B) 9 m (C) 9.5 m (D) 15 m

Last Answer : Answer: Option A

The height of a water column equivalent to a pressure of 0.15 MPa is (A) 15.3 m (B) 25.3 m (C) 35.3 m (D) 45.3 m

Description : The height of a water column equivalent to a pressure of 0.15 MPa is (A) 15.3 m (B) 25.3 m (C) 35.3 m (D) 45.3 m

Last Answer : The height of a water column equivalent to a pressure of 0.15 MPa can be calculated using the hydrostatic equation: Pressure (P) = Density of water (rho) * Acceleration due to gravity (g) * Height (h) ... s^2) = 0.15 m Therefore, the height of the water column would be approximately 0.15 meters.

In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 m

Description : In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 mm

Last Answer : Answer: Option B

If the number of lanes on the carriageway of a road is more than two, the total width of lane ways is equal to 3.0 m (A) + 0.60 m (B) + 0.70 m (C) + 0.90 m (D) + 1.50 m

Description : If the number of lanes on the carriageway of a road is more than two, the total width of lane ways is equal to 3.0 m (A) + 0.60 m (B) + 0.70 m (C) + 0.90 m (D) + 1.50 m

Last Answer : Answer: Option B

Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Description : Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Last Answer : Answer: Option C

According to Indian Road Congress, the width of carriageway, is(A) 3.75 m for single lane (B) 7.0 m for two lanes without raised kerbs (C) 7.5 m for two lanes with raised kerbs (D) All the above

Description : According to Indian Road Congress, the width of carriageway, is (A) 3.75 m for single lane (B) 7.0 m for two lanes without raised kerbs (C) 7.5 m for two lanes with raised kerbs (D) All the above

Last Answer : Answer: Option D

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Description : If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Last Answer : Answer: Option D

To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Last Answer : Answer: Option A

On the recommendations of Indian Road Congress, the ruling gradient in plains, is (A) 1 in 15 (B) 1 in 20 (C) 1 in 30 (D) 1 in 45

Description : On the recommendations of Indian Road Congress, the ruling gradient in plains, is (A) 1 in 15 (B) 1 in 20 (C) 1 in 30 (D) 1 in 45

Last Answer : Answer: Option C

A district road with a bituminous pavement has a horizontal curve of 1000 m for a design speed of 75 km ph. The super-elevation is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70

Description : A district road with a bituminous pavement has a horizontal curve of 1000 m for a design speed of 75 km ph. The super-elevation is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70

Last Answer : Answer: Option A

According to Highway Research Board of U.S.A. practical land width, is (A) 2.7 m (B) 3.0 m (C) 3.3 m (D) 3.6 m

Description : According to Highway Research Board of U.S.A. practical land width, is (A) 2.7 m (B) 3.0 m (C) 3.3 m (D) 3.6 m

Last Answer : Answer: Option D

If the width of carriage way is 12.5 metres, outer edge 50 cm higher than the inner edge, the required super elevation is (A) 50 cm (B) 1 in 25 (C) 1 in 400 (D) 1 in 40

Description : If the width of carriage way is 12.5 metres, outer edge 50 cm higher than the inner edge, the required super elevation is (A) 50 cm (B) 1 in 25 (C) 1 in 400 (D) 1 in 40

Last Answer : Answer: Option B

The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2 , safe shear stress 5 kg/cm2 and B.M. 24 mt, (A) Is safe in shear (B) Is unsafe in shear (C) Is over safe in shear(D) Needs redesigning

Description : The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2 , safe shear stress 5 kg/cm2 and B.M. 24 mt, (A) Is safe in shear (B) Is unsafe in shear (C) Is over safe in shear (D) Needs redesigning

Last Answer : Answer: Option B

An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

For a 6.6 m wide two lane pavement, berms are provided on either side having a width of (A) 1.00 m (B) 1.25 m (C) 1.50 m (D) 1.75 m

Description : For a 6.6 m wide two lane pavement, berms are provided on either side having a width of (A) 1.00 m (B) 1.25 m (C) 1.50 m (D) 1.75 m

Last Answer : Answer: Option C

For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Description : Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Last Answer : c. 30 to 40

I bought 15 pens and sold 12 of them at the cost price of 18 pens. What is the profit percentage? a) 50 b) 25 c) 30 d) 45

Description : I bought 15 pens and sold 12 of them at the cost price of 18 pens. What is the profit percentage? a) 50 b) 25 c) 30 d) 45

Last Answer : a) 50

What are the commonest congenitally missing teeth:VERY CONTROVERSIAL BUT SEE THE SAMPLE QUESTIONS FROM ADC IT’S THE ANSWER A. 12, 22 B. 35, 45 ACC TO CAMERON C. 15, 25 D. 33, 43

Description : What are the commonest congenitally missing teeth:VERY CONTROVERSIAL BUT SEE THE SAMPLE QUESTIONS FROM ADC IT’S THE ANSWER A. 12, 22 B. 35, 45 ACC TO CAMERON C. 15, 25 D. 33, 43

Last Answer : A. 12, 22

A 240m train crosses a standing object in 6 seconds. Find the time taken by the train to cross a long pole of length 162.5 m. A) 25 B) 45 C) 10 D) 15

Description : A 240m train crosses a standing object in 6 seconds. Find the time taken by the train to cross a long pole of length 162.5 m. A) 25 B) 45 C) 10 D) 15

Last Answer : ANSWER:C Explanation: Length of the train = 240 m Time taken to cross an object = 6 seconds Speed of the train = Length of the train / Time taken to cross an object  = 240/6 m/s  = 40 m/s  Length of ...  = (240 + 162.5)/40  = 402.5/40  = 10.06 seconds  Hence the answer is 10 seconds. 

Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins

Description : Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins

Last Answer : D Part filled in 5 min = 5(1/12 +1/15) = 5*9/60 = ¾ Part emptied in 1 min when all the pumps are opened, = 1/6 – (1/12 + 1/15) = 1/6 – 3/20 = 1/60 Now 1/60 is part emptied in 1 min Therefore ¾ part will be emptied in 60 * ¾ = 45 mins

Dolomite is a lime stone which contains carbonate of magnesia upto (A) 15 % (B) 20 % (C) 25 % (D) 45 %

Description : Dolomite is a lime stone which contains carbonate of magnesia upto (A) 15 % (B) 20 % (C) 25 % (D) 45 %

Last Answer : Answer: Option D

The raft slab is projected beyond the outer walls of the structure by (A) 5 to 10 cm (B) 15 to 20 cm (C) 25 to 30 cm (D) 30 to 45 cm

Description : The raft slab is projected beyond the outer walls of the structure by (A) 5 to 10 cm (B) 15 to 20 cm (C) 25 to 30 cm (D) 30 to 45 cm

Last Answer : Answer: Option D

High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

The pavement width of a road depends upon (A) Terrain (B) Type of traffic (C) Number of lanes (D) All the above

Description : The pavement width of a road depends upon (A) Terrain (B) Type of traffic (C) Number of lanes (D) All the above

Last Answer : Answer: Option C

The width formation of a road means the width of (A) Carriageway (B) Pavement and shoulders (C) Embankment at ground level (D) Embankment at the top level

Description : The width formation of a road means the width of (A) Carriageway (B) Pavement and shoulders (C) Embankment at ground level (D) Embankment at the top level

Last Answer : Answer: Option D

The width of road pavements, depends upon (A) Width of traffic lane (B) Number of traffic (C) Width of median strip (D) All the above

Description : The width of road pavements, depends upon (A) Width of traffic lane (B) Number of traffic (C) Width of median strip (D) All the above

Last Answer : Answer: Option D

Width of a rotary round should be equal to (A) Twice the width of narrowest radial road (B) Width of the widest road (C) Width of the widest road plus the width of one lane (D) Width of the widest road plus 2 metres

Description : Width of a rotary round should be equal to (A) Twice the width of narrowest radial road (B) Width of the widest road (C) Width of the widest road plus the width of one lane (D) Width of the widest road plus 2 metres

Last Answer : Answer: Option C

The width of the right of way, is influenced by (A) Formation width (B) Shoulders or berms (C) Classification of road (D) All the above

Description : The width of the right of way, is influenced by (A) Formation width (B) Shoulders or berms (C) Classification of road (D) All the above

Last Answer : Answer: Option D

Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Description : Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Last Answer : Answer: Option A

The Minimum amount of steel for Main reinforcement in slab should be (Fe 415- grade of steel) [ A ] 0.12 percent of gross cross sectional area [ B ] 0.15 percent of gross cross sectional area [ C ] 0.20 percent of gross cross sectional area [ D ] 0.25 percent of gross cross sectional area.

Description : The Minimum amount of steel for Main reinforcement in slab should be (Fe 415- grade of steel) [ A ] 0.12 percent of gross cross sectional area [ B ] 0.15 percent of gross cross sectional area [ C ] 0.20 percent of gross cross sectional area [ D ] 0.25 percent of gross cross sectional area.

Last Answer : [ A ] 0.12 percent of gross cross sectional area

In moderate exposure , the allowable crack width at the surface of concrete should be [ A ] 0.20 mm [ B ] 0.30 mm [ C ] 0.45 mm [ D ] 0.55 mm

Description : In moderate exposure , the allowable crack width at the surface of concrete should be [ A ] 0.20 mm [ B ] 0.30 mm [ C ] 0.45 mm [ D ] 0.55 mm

Last Answer : [ A ] 0.20 mm

Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10, the sight on the up slope must be less than (A) 25 cm (B) 20 m (C) 45 m (D) 10 m

Description : Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10,  the sight on the up slope must be less than  (A) 25 cm  (B) 20 m  (C) 45 m  (D) 10 m

Last Answer : (C) 45 m 

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Description : For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Last Answer : Answer: Option D

The width of the right of way in urban area, is kept between 24 m to 60 m for (A) National Highways (B) State Highways (C) Both (a) and (b) (D) None of these

Description : The width of the right of way in urban area, is kept between 24 m to 60 m for (A) National Highways (B) State Highways (C) Both (a) and (b) (D) None of these

Last Answer : Answer: Option D

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C