The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve

The radius of curvature provided along a transition curve, is
(A) Minimum at the beginning
(B) Same throughout its length
(C) Equal to the radius of circular curve
(D) Varying from infinity to the radius of circular curve
by

1 Answer

Answer :

Answer: Option D
by

Related questions

In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Description : In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Last Answer : Answer: Option D

Full amount of extra width of a pavement on the curve, is provided at (A) Beginning of the transition curve (B) Centre of the transition curve (C) Beginning of the circular curve (D) Centre of the circular curve

Description : Full amount of extra width of a pavement on the curve, is provided at (A) Beginning of the transition curve (B) Centre of the transition curve (C) Beginning of the circular curve (D) Centre of the circular curve

Last Answer : Answer: Option C

Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the transition curve with main curve (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (C) Gradual change of gradient from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (D) None of these

Description : Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the ... specified amount at the junction of the transition curve with main curve (D) None of these

Last Answer : (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve

If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"

Description : If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"

Last Answer : (C) 1°43' 28"

In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Description : In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Last Answer : Answer: Option C

If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum perpendicular offset for the transition curve, is (A) 0.70 m (B) 1.70 m (C) 2.70 m (D) 3.70 m

Description : If the length of a transition curve to be introduced between a straight and a circular curve of  radius 500 m is 90 m, the maximum perpendicular offset for the transition curve, is  (A) 0.70 m  (B) 1.70 m  (C) 2.70 m  (D) 3.70 m

Last Answer : (C) 2.70 m 

If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Description : If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Last Answer : Answer: Option B

For bending equation to be valid, radius of curvature of the beam after bending should be a. Equal to its transverse dimensions b. Infinity c. Very large compared to its transverse dimensions d. Double its transverse dimensions

Description : For bending equation to be valid, radius of curvature of the beam after bending should be a. Equal to its transverse dimensions b. Infinity c. Very large compared to its transverse dimensions d. Double its transverse dimensions

Last Answer : c. Very large compared to its transverse dimensions

Designation of a curve is made by: (A) Angle subtended by a chord of any length (B) Angle subtended by an arc of specified length (C) Radius of the curve (D) Curvature of the curve

Description : Designation of a curve is made by:  (A) Angle subtended by a chord of any length  (B) Angle subtended by an arc of specified length  (C) Radius of the curve  (D) Curvature of the curve 

Last Answer : (C) Radius of the curve 

If the rate of gain of radial acceleration is 0.3 m per sec3 and full centrifugal ratio is developed. On the curve the ratio of the length of the transition curve of same radius on road and railway, is (A) 2.828 (B) 3.828 (C) 1.828 (D) 0.828

Description : If the rate of gain of radial acceleration is 0.3 m per sec3 and full centrifugal ratio is developed. On the curve the ratio of the length of the transition curve of same radius on road and railway, is (A) 2.828 (B) 3.828 (C) 1.828 (D) 0.828

Last Answer : (A) 2.828

If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : D

Consider the following statements: Mitra’s hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate of change of velocity per unit length of transition is constant throughout the length of the transition. Which of these statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

If the designed speed on a circular curve of radius 1400 m is 80 km/hour, no super-elevation is provided, if the camber, is (A) 4 % (B) 3 % (C) 2 % (D) 1.7 %

Description : If the designed speed on a circular curve of radius 1400 m is 80 km/hour, no super-elevation is provided, if the camber, is (A) 4 % (B) 3 % (C) 2 % (D) 1.7 %

Last Answer : Answer: Option C

If R is the radius of a main curve and L is the length of the transition curve, the shift of the curve, is (A) L/24 R (B) L2 /24 R (C) L3 /24 R (D) L4 /24 R

Description : If R is the radius of a main curve and L is the length of the transition curve, the shift of the curve, is (A) L/24 R (B) L2 /24 R (C) L3 /24 R (D) L4 /24 R

Last Answer : Answer: Option B

If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'

Description : If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'

Last Answer : Answer: Option C

Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Description : Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Last Answer : (D) Four times the shift

Minimum radius of a simple circular curve deflecting through 5°, is (A) 1618.9 m (B) 1816.9 m (C) 1718.9 m (D) 1817.9 m

Description : Minimum radius of a simple circular curve deflecting through 5°, is (A) 1618.9 m (B) 1816.9 m (C) 1718.9 m (D) 1817.9 m

Last Answer : Answer: Option C

The radius of curvature of a converging mirror is 30 cm. At what distance from the mirror should an object be placed so as to obtain a virtual image? (a) infinity (b) 30 cm (c) Between 16 cm and 30 cm (d) Between 0 cm and 15 cm

Description : The radius of curvature of a converging mirror is 30 cm. At what distance from the mirror should an object be placed so as to obtain a virtual image? (a) infinity (b) 30 cm (c) Between 16 cm and 30 cm (d) Between 0 cm and 15 cm

Last Answer : (d) Between 0 cm and 15 cm

The radius of a simple circular curve is 300 m and length of its specified chord is 30 m. The degree of the curve is (A) 5.73° (B) 5.37° (C) 3.57° (D) 3.75°

Description : The radius of a simple circular curve is 300 m and length of its specified chord is 30 m. The degree of the curve is (A) 5.73° (B) 5.37° (C) 3.57° (D) 3.75°

Last Answer : (A) 5.73°

The tangent length of a simple circular curve of radius R (A) R tan (B) R tan (C) R sin (D) R sin

Description : The tangent length of a simple circular curve of radius R (A) R tan (B) R tan (C) R sin (D) R sin

Last Answer : Answer: Option B

If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Description : If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Last Answer : Answer: Option D

Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of column should not exceed 300 mm (C) Reinforcing bars in a column should not be less than 12 mm in diameter (D) The number of longitudinal bars provided in a circular column should not be less than four

Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four

Last Answer : Answer: Option D

In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°

Description : In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°

Last Answer : Answer: Option B

If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves, (A) L/R (B) L/2R (C) L²/2R (D) L/3R

Description : If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves, (A) L/R (B) L/2R (C) L²/2R (D) L/3R

Last Answer : Answer: Option C

If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Description : If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Last Answer : Answer: Option B

Minimum radius of curvature of National Highways or State highways in hill region free from snow, is kept (A) 60 m (B) 50 m (C) 33 m (D) 30 m

Description : Minimum radius of curvature of National Highways or State highways in hill region free from snow, is kept (A) 60 m (B) 50 m (C) 33 m (D) 30 m

Last Answer : Answer: Option B

The type of transition curves generally provided on hill roads, is (A) Circular (B) Cubic parabola (C) Lemniscate (D) Spiral

Description : The type of transition curves generally provided on hill roads, is (A) Circular (B) Cubic parabola (C) Lemniscate (D) Spiral

Last Answer : Answer: Option D

The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Description : The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Last Answer : (D) Both viscosity and surface tension are increased

The focal length of a double convex lens is equal to radius of curvature of either surface. The refractive index of its material is

Description : The focal length of a double convex lens is equal to radius of curvature of either surface. The refractive index of its material is

Last Answer : The focal length of a double convex lens is equal to radius of curvature of either surface. The refractive index of its material is

The standard equation of a cubic parabolic transition curve provided on roads, is (A) y = x3 /6 RL (B) y = x/6 RL (C) y = l²/6 RL (D) y = l3 /6 RL

Description : The standard equation of a cubic parabolic transition curve provided on roads, is (A) y = x3 /6 RL (B) y = x/6 RL (C) y = l²/6 RL (D) y = l3 /6 RL

Last Answer : Answer: Option A

The standard equation of a cubical spiral transition curve provided on roads, is (A) y = l²/6RL (B) y = x3 /6RL (C) y = x2 /6RL (D) y = x/6RL

Description : The standard equation of a cubical spiral transition curve provided on roads, is (A) y = l²/6RL (B) y = x3 /6RL (C) y = x2 /6RL (D) y = x/6RL

Last Answer : Answer: Option B

The type of curves generally provided on highways, is (A) Critical curve (B) Transition curve (C) Vertical curve (D) All the above

Description : The type of curves generally provided on highways, is (A) Critical curve (B) Transition curve (C) Vertical curve (D) All the above

Last Answer : Answer: Option D

The sensitivity of a bubble tube can be increased by (A) Increasing the diameter of the tube (B) Decreasing the length of bubble (C) Increasing the viscosity of liquid (D) Decreasing the radius of curvature of tube

Description : The sensitivity of a bubble tube can be increased by (A) Increasing the diameter of the tube (B) Decreasing the length of bubble (C) Increasing the viscosity of liquid (D) Decreasing the radius of curvature of tube

Last Answer : (A) Increasing the diameter of the tube

The focal length of a concave spherical mirror is equal to 1 meter. What is the radius of curvature of this mirror?

Description : The focal length of a concave spherical mirror is equal to 1 meter. What is the radius of curvature of this mirror?  

Last Answer : ANSWER: 2 METERS

The following assumption is not true in the theory of pure torsion: (A) The twist along the shaft is uniform (B) The shaft is of uniform circular section throughout (C) Cross-section of the shaft, which is plane before twist remains plane after twist (D) All radii get twisted due to torsion

Description : The following assumption is not true in the theory of pure torsion:  (A) The twist along the shaft is uniform  (B) The shaft is of uniform circular section throughout  (C) Cross- ... , which is plane before twist remains plane after twist  (D) All radii get twisted due to torsion 

Last Answer : (D) All radii get twisted due to torsion 

Hydraulic mean radius is A. Mean radius of sewer B. Difference in heads between two points in circular pipes C. Mean of radii in a pipe line of varying cross -sections D. Cross-sectional area/wetted perimeter

Description : Hydraulic mean radius is A. Mean radius of sewer B. Difference in heads between two points in circular pipes C. Mean of radii in a pipe line of varying cross -sections D. Cross-sectional area/wetted perimeter

Last Answer : ANS: D

If is the length of a sub-chord and is the radius of simple curve, the angle of deflection between its tangent and sub-chord, in minutes, is equal to (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R

Description : If is the length of a sub-chord and is the radius of simple curve, the angle of deflection  between its tangent and sub-chord, in minutes, is equal to  (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R

Last Answer : (D) 1718.9 S/R

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

If degree of a road curve is defined by assuming the standard length of an arc as 30 metres, the radius of 1° curve is equal (A) 1719 m (B) 1146 m (C) 1046 m (D) 1619 m

Description : If degree of a road curve is defined by assuming the standard length of an arc as 30 metres, the radius of 1° curve is equal (A) 1719 m (B) 1146 m (C) 1046 m (D) 1619 m

Last Answer : Answer: Option A

If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Description : If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Last Answer : (D) GV²/gR

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

If a constant section beam is subjected to a uniform bending moment throughout, its length bends to (A) A circular arc (B) A parabolic arc (C) A catenary (D) None of these

Description : If a constant section beam is subjected to a uniform bending moment throughout, its length bends  to  (A) A circular arc  (B) A parabolic arc  (C) A catenary  (D) None of these 

Last Answer : (A) A circular arc 

The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

Which of the following statements is correct? (A) Uniformity coefficient represents the shape of the particle size distribution curve. (B) For a well graded soil, both uniformity coefficient and coefficient of curvature are nearly unity. (C) A soil is said to be well graded if it has most of the particles of about the same size (D) None of the above

Description : Which of the following statements is correct? (A) Uniformity coefficient represents the shape of the particle size distribution curve. (B) For a well graded soil, both uniformity coefficient and coefficient of ... if it has most of the particles of about the same size (D) None of the above

Last Answer : Answer: Option D

If the ruling gradient on any highway is 3%, the gradient provided on the curve of 300 metre radius, is (A) 2.00 % (B) 2.25 % (C) 2.50 % (D) 2.75 %

Description : If the ruling gradient on any highway is 3%, the gradient provided on the curve of 300 metre radius, is (A) 2.00 % (B) 2.25 % (C) 2.50 % (D) 2.75 %

Last Answer : Answer: Option D

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

2. The radius of curvature of a spherical mirror is 20 cm. What is its focal length? -Physics-10

Description : 2. The radius of curvature of a spherical mirror is 20 cm. What is its focal length? -Physics-10

Last Answer : Radius of curvature (R) = 20 cm Radius of curvature of the spherical mirror = 2 × Focal length (f) R = 2f f= R/2 = 20 / 2 = 10 Therefore, the focal length of the spherical mirror is 10 cm.

Along a hill road, a side drain is provided on (A) Outer side of a spur curve(B) Outer side of a re-entrant curve (C) Outer side of both (a) and (b) (D) Inner side of both (a) and (b)

Description : Along a hill road, a side drain is provided on (A) Outer side of a spur curve (B) Outer side of a re-entrant curve (C) Outer side of both (a) and (b) (D) Inner side of both (a) and (b)

Last Answer : Answer: Option D

The minimum ratio of the radii of two circular curves of a compound curve, is kept (A) 1.25 (B) 1.5 (C) 1.75 (D) 2.0

Description : The minimum ratio of the radii of two circular curves of a compound curve, is kept (A) 1.25 (B) 1.5 (C) 1.75 (D) 2.0

Last Answer : Answer: Option B

1. Find the focal length of a convex mirror whose radius of curvature is 32 cm. -Physics-10

Description : 1. Find the focal length of a convex mirror whose radius of curvature is 32 cm. -Physics-10

Last Answer : Radius of curvature (R) = 32 cm Radius of curvature = 2 × Focal length (f) R= 2f f = R/2 = 32/2 = 16 Therefore, the focal length of the given convex mirror is 16 cm.