Along a hill road, a side drain is provided on (A) Outer side of a spur curve(B) Outer side of a re-entrant curve (C) Outer side of both (a) and (b) (D) Inner side of both (a) and (b)

Along a hill road, a side drain is provided on
(A) Outer side of a spur curve
(B) Outer side of a re-entrant curve
(C) Outer side of both (a) and (b)
(D) Inner side of both (a) and (b)
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Side drains on both sides of a hill road, are essential when the road is (A) Along the spur curves (B) Along the re-entrant curves (C) In cutting (D) None of these

Description : Side drains on both sides of a hill road, are essential when the road is (A) Along the spur curves (B) Along the re-entrant curves (C) In cutting (D) None of these

Last Answer : Answer: Option C

Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Description : Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Last Answer : Answer: Option A

Hill roads are (A) Provided camber along spur curves (B) Provided camber along valley curves (C) Seldom provided a camber (D) None of these

Description : Hill roads are (A) Provided camber along spur curves (B) Provided camber along valley curves (C) Seldom provided a camber (D) None of these

Last Answer : Answer: Option C

no super elevation is provided on a road along curves, pot holes may develop at (A) Inner edge of the road (B) Outer edge of the road (C) Centre of the road (D) Nowhere on the road

Description : no super elevation is provided on a road along curves, pot holes may develop at (A) Inner edge of the road (B) Outer edge of the road (C) Centre of the road (D) Nowhere on the road

Last Answer : Answer: Option B

The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Description : The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Last Answer : Answer: Option B

Re-entrant or Borda's mouthpiece is an __________ mouthpiece. (A) Internal (B) External(C) Both A and B (D) None of these

Description : Re-entrant or Borda's mouthpiece is an __________ mouthpiece. (A) Internal (B) External (C) Both A and B (D) None of these

Last Answer : Answer: Option A

In hill roads the side drains arc provided (A) Only on the hill side of road (B) Only on the opposite side of hill (C) On both sides of roa(D) None of the above

Description : In hill roads the side drains arc provided (A) Only on the hill side of road (B) Only on the opposite side of hill (C) On both sides of roa (D) None of the above

Last Answer : Answer: Option A

If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Description : If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Last Answer : Answer: Option B

Describe re-entrant procedure with the help of schematic diagram.

Description : Describe re-entrant procedure with the help of schematic diagram.

Last Answer : Re-entrant Procedures: A procedure is said to be re-entrant, if it can be interrupted, used and re-entered without losing or writing over anything. To be a re-entrant, Procedure ... program execution flow reenters in the procedure1. These types of procedures are called reentrant procedures.

Raising of outer edge of a road with respect to inner edge, is known (A) Super elevation (B) Cant (C) Banking (D) All the above

Description : Raising of outer edge of a road with respect to inner edge, is known (A) Super elevation (B) Cant (C) Banking (D) All the above

Last Answer : Answer: Option D

The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Description : The most commonly adopted method to provide super-elevation on roads, is by pivoting the road surface about (A) Outer edge so that the inner edge is lowered (B) Crown so that outer edge is raised and inner edge is lowered (C) Inner edge so that outer edge is raised (D) None of these

Last Answer : Answer: Option C

Intermediate catch water drains are provided only, if (A) Catchment area of the watershed above road is large (B) Intensity of rainfall is heavy (C) Single catch water drain is inadequate (D) All the above

Description : Intermediate catch water drains are provided only, if (A) Catchment area of the watershed above road is large (B) Intensity of rainfall is heavy (C) Single catch water drain is inadequate (D) All the above

Last Answer : Answer: Option D

Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Description : Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Last Answer : Answer: Option B

If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Description : If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Last Answer : Answer: Option C

The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Description : The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Last Answer : Answer: Option C

In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Description : In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Last Answer : Answer: Option D

Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Description : Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Last Answer : Answer: Option C

Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Description : Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Last Answer : Answer: Option B

First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Description : First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Last Answer : Answer: Option D

Parapet walls along hill roads, are provided (A) To retain the back filling (B) To prevent the hill from sliding (C) To prevent the wheels of the vehicle from coming on the retaining wall (D) None of these

Description : Parapet walls along hill roads, are provided (A) To retain the back filling (B) To prevent the hill from sliding (C) To prevent the wheels of the vehicle from coming on the retaining wall (D) None of these

Last Answer : Answer: Option C

An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km(B) 60 m per km (C) 75 m per km (D) 90 m per km

Description : An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km (B) 60 m per km (C) 75 m per km (D) 90 m per km

Last Answer : Answer: Option B

A current `i` ampere flows along the inner conductor of a coaxial cable and returns along the outer conductor fo the cable, then the magnetic inductio

Description : A current `i` ampere flows along the inner conductor of a coaxial cable and returns along the outer conductor fo the cable, then the magnetic inductio

Last Answer : A current `i` ampere flows along the inner conductor of a coaxial cable and returns along the outer conductor fo the ... D. `(mu_(0))/(2pi)(2pii)/(r)`

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

The wall constructed for the stability of an excavated portion of a road on the hill side, is known as (A) Retaining wall (B) Breast wall (C) Parapet wall (D) All the above

Description : The wall constructed for the stability of an excavated portion of a road on the hill side, is known as (A) Retaining wall (B) Breast wall (C) Parapet wall (D) All the above

Last Answer : Answer: Option B

If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Description : If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Last Answer : Answer: Option B

The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve

Description : The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve

Last Answer : Answer: Option D

To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Description : To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Last Answer : Answer: Option D

Explain the types of hill road curve with neat sketch.

Description : Explain the types of hill road curve with neat sketch.

Last Answer : Types of curves provided on hill road are as follow:  (1) Hair pin bend curve: The curve in a hill road which changes its direction through an angle of 180o or so, down the hill on the ... moving traffic. At such curves, the parapet wall is provided only for safety of fast moving traffic.

Why Necessity of teeth provided on pinion and spur wheel?

Description : Why Necessity of teeth provided on pinion and spur wheel?

Last Answer : Without the teeth meshing together, there would be no transfer of power/force from one pinion/spur wheel to its neighbour. Without the teeth on the main drive shaft gear wheel, you would not be able to turn the rest of the pinion and spur wheels.

Read the different components from (i) to (iv) in the list given below and tell the correct order of the components with reference to their arrangement from outer side to inner side in a woody dicot stem. (i) Secondary cortex (ii) Wood (iii)Secondary phloem (iv) Phellem The correct order is (a) (iv), (i), (iii), (ii) (b) (iv), (iii), (i), (ii) (c) (iii), (iv), (ii), (i) (d) (i), (ii), (iv), (iii).

Description : Read the different components from (i) to (iv) in the list given below and tell the correct order of the components with reference to their arrangement from outer side to inner side in a woody dicot stem. (i) Secondary cortex (ii) Wood ... ) (c) (iii), (iv), (ii), (i) (d) (i), (ii), (iv), (iii).

Last Answer : (a) (iv), (i), (iii), (ii)

Two travellers spend from 12 o'clock to 6 o'clock walking along a level road, up a hill and back again. Their pace is 4 mph on the level, 3 mph uphill, and 6 mph downhill.How far do they walk and at what time do they reach the top of the hill? -Riddles

Description : Two travellers spend from 12 o'clock to 6 o'clock walking along a level road, up a hill and back again. Their pace is 4 mph on the level, 3 mph uphill, and 6 mph downhill.How far do they walk and at what time do they reach the top of the hill? -Riddles

Last Answer : 24 miles half past three.

If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs the ratio of inner diameter to outer diameter, is 17/64 (fs/N) (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Description : If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque  when t attains maximum shear stress fs  the ratio of inner diameter to outer diameter, is 17/64  (fs/N)  (A) 1/2  (B) 1/3  (C) 1/4  (D) 1/5

Last Answer : (C) 1/4 

The yield moment of a cross section is defined as the moment that will just produce the yield stress in (A) The outer most fibre of the section (B) The inner most fibre of the section (C) The neutral fibre of the section (D) The fibre everywhere

Description : The yield moment of a cross section is defined as the moment that will just produce the yield  stress in  (A) The outer most fibre of the section  (B) The inner most fibre of the section  (C) The neutral fibre of the section  (D) The fibre everywhere 

Last Answer : (A) The outer most fibre of the section 

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

If the width of carriage way is 12.5 metres, outer edge 50 cm higher than the inner edge, the required super elevation is (A) 50 cm (B) 1 in 25 (C) 1 in 400 (D) 1 in 40

Description : If the width of carriage way is 12.5 metres, outer edge 50 cm higher than the inner edge, the required super elevation is (A) 50 cm (B) 1 in 25 (C) 1 in 400 (D) 1 in 40

Last Answer : Answer: Option B

In distribution pipes, drain valves are provided at (A) Lower point (B) Higher point (C) Junction points (D) Anywhere

Description : In distribution pipes, drain valves are provided at (A) Lower point (B) Higher point (C) Junction points (D) Anywhere

Last Answer : (A) Lower point

The valves provided at low points of pipes to drain off water quickly under gravity, are called (A) Blow off valves (B) Drain valves (C) Sewer valves (D) All the above

Description : The valves provided at low points of pipes to drain off water quickly under gravity, are called (A) Blow off valves (B) Drain valves (C) Sewer valves (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface water (C) Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the top of the trap (C) The mica flap valve which opens inwards only, is fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Description : Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the ... fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Last Answer : (D) The water seal is less than that of ordinary traps

Pick up the correct statement from the following: (A) In a gully trap, a water seal of 6 to 7.5 cm is provided (B) The gully trap collects waste water from the kitchen, sink, wash basins, etc. (C) The gully trap disconnects the sullage drain from the main drainage system (D) The grating provided over gully traps is 23 cm square

Description : Pick up the correct statement from the following: (A) In a gully trap, a water seal of 6 to 7.5 cm is provided (B) The gully trap collects waste water from the kitchen, sink, wash basins ... the sullage drain from the main drainage system (D) The grating provided over gully traps is 23 cm square

Last Answer : (B) The gully trap collects waste water from the kitchen, sink, wash basins, etc.

The trap which is provided to disconnect the house drain from the street sewer is called (A) Master trap (B) Intercepting trap (C) Interception manhole (D) All the above

Description : The trap which is provided to disconnect the house drain from the street sewer is called (A) Master trap (B) Intercepting trap (C) Interception manhole (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so proportioned that it may not overturn by the lateral pressure (C) The retaining wall should be safe against sliding (D) To drain off water from the earth retained, weep holes are provided near the top of the retaining wall

Description : Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so ... off water from the earth retained, weep holes are provided near the top of the retaining wall

Last Answer : Answer: Option D

Weep holes are provided in retaining and breast walls (A) To drain off the water from the filling (B) To ventilate the stone masonry (C) To add architectural beauty (D) To increase compaction of the earth retained

Description : Weep holes are provided in retaining and breast walls (A) To drain off the water from the filling (B) To ventilate the stone masonry (C) To add architectural beauty (D) To increase compaction of the earth retained

Last Answer : Answer: Option A

In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on (A) The front face in one direction (B) The front face in both directions (C) The inner face in one direction (D) The inner face in both directions

Description : In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on (A) The front face in one direction (B) The front face in both directions (C) The inner face in one direction (D) The inner face in both directions

Last Answer : Answer: Option C

In a counterfort retaining wall, the main reinforcement in the stem at mid span is provided on (A) Front face only (B) Inner face only (C) Both front face and inner face (D) None of the above

Description : In a counterfort retaining wall, the main reinforcement in the stem at mid span is provided on (A) Front face only (B) Inner face only (C) Both front face and inner face (D) None of the above

Last Answer : Answer: Option A

In counterfort retaining walls, the main reinforcement in the stem at support is (A) Not provided (B) Provided only on inner face (C) Provided only on front face (D) Provided both on inner and front faces

Description : In counterfort retaining walls, the main reinforcement in the stem at support is (A) Not provided (B) Provided only on inner face (C) Provided only on front face (D) Provided both on inner and front faces

Last Answer : Answer: Option B

In regulation of public telecommunications carrier such as in the evaluation of new entrant, the following consideration shall be given emphasis to _______. A. Legal, technical and citizenship B. Technical, citizenship and kind of service C. Citizenship, capacity and financial D. Technical, legal and financial

Description : In regulation of public telecommunications carrier such as in the evaluation of new entrant, the following consideration shall be given emphasis to _______. A. Legal, technical and citizenship B. ... and kind of service C. Citizenship, capacity and financial D. Technical, legal and financial

Last Answer : D. Technical, legal and financial

State the necessity of providing catch water drain in Hill Roads.

Description : State the necessity of providing catch water drain in Hill Roads.

Last Answer : 1) Catch water drains are provided to collect excessive rainwater in heavy rainfall regions i.e. in case of hill roads. 2) These drains are useful to avoid large water flow reaching to hill ... be excavated natural rock section on hill top side which avoids erosion of soil along hill road.

Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Description : Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Last Answer : ANS: A

Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of 30 m to 60 m along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Description : Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of ... along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Last Answer : ANS: D