If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'

If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with
tangent to locate the junction point, is
(A) 1° 11'
(B) 2° 11'
(C) 3° 11'
(D) 4° 11'
by

1 Answer

Answer :

Answer: Option C
by

Related questions

If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"

Description : If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"

Last Answer : (C) 1°43' 28"

For clear distinct vision, images of obstructions should fall on the retina with a cone of (A) 2° (B) 3° (C) 4° (D) 5°

Description : For clear distinct vision, images of obstructions should fall on the retina with a cone of (A) 2° (B) 3° (C) 4° (D) 5°

Last Answer : Answer: Option D

Consider a 1°, 2° and 3° amine, all of equivalent molecular weight. Which amine is most likely to have the lowest boiling point? (a) 1° amine (b) 2° amine (c) 3° amine (d) Not enough information to determine

Description : Consider a 1°, 2° and 3° amine, all of equivalent molecular weight. Which amine is most likely to have the lowest boiling point? (a) 1° amine (b) 2° amine (c) 3° amine (d) Not enough information to determine

Last Answer : 3° amine

Which of the following does not react with acyl chlorides to form amides : (a) ammonia (b) 1° amine (c) 2° amine (d) 3° amine

Description : Which of the following does not react with acyl chlorides to form amides : (a) ammonia (b) 1° amine (c) 2° amine (d) 3° amine

Last Answer : 3° amine

A sample of pure amine molecules is found to possess no intermolecular Hbonding. This sample is most likely : (a) 1° amine (b) 2° amine (c) 3° amine (d) all of these

Description : A sample of pure amine molecules is found to possess no intermolecular Hbonding. This sample is most likely : (a) 1° amine (b) 2° amine (c) 3° amine (d) all of these

Last Answer : 3° amine

Which of the following correctly reflects relative stabilities of carbocations? (a) 3° allylic > 2° > 1° benzylic (b) methyl > 2° benzylic > 3° (c) 3° benzylic > vinyl > 1°(d) 2° allylic > 2° > vinyl

Description : Which of the following correctly reflects relative stabilities of carbocations? (a) 3° allylic > 2° > 1° benzylic (b) methyl > 2° benzylic > 3° (c) 3° benzylic > vinyl > 1° (d) 2° allylic > 2° > vinyl

Last Answer : (d) 2° allylic > 2° > viny

The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Description : The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Last Answer : b. 2°/min

The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Description : The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Last Answer : b. 2°/min

Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the transition curve with main curve (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (C) Gradual change of gradient from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (D) None of these

Description : Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the ... specified amount at the junction of the transition curve with main curve (D) None of these

Last Answer : (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve

If degree of a road curve is defined by assuming the standard length of an arc as 30 metres, the radius of 1° curve is equal (A) 1719 m (B) 1146 m (C) 1046 m (D) 1619 m

Description : If degree of a road curve is defined by assuming the standard length of an arc as 30 metres, the radius of 1° curve is equal (A) 1719 m (B) 1146 m (C) 1046 m (D) 1619 m

Last Answer : Answer: Option A

Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Description : Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Last Answer : (D) Four times the shift

If is the length of a sub-chord and is the radius of simple curve, the angle of deflection between its tangent and sub-chord, in minutes, is equal to (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R

Description : If is the length of a sub-chord and is the radius of simple curve, the angle of deflection  between its tangent and sub-chord, in minutes, is equal to  (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R

Last Answer : (D) 1718.9 S/R

If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : D

The slope correction for a 3° slope for a length of 100 m, is (A) -0.11 m (B) -0.12 m (C) -1.87 m (D) -0.137 m

Description : The slope correction for a 3° slope for a length of 100 m, is  (A) -0.11 m  (B) -0.12 m  (C) -1.87 m  (D) -0.137 m

Last Answer : (D) -0.137 m

4° F will be equivalent to (a) 77° X (b) 113.3° X (c) 128.6° X (d) 154.4° X

Description : 4° F will be equivalent to (a) 77° X (b) 113.3° X (c) 128.6° X (d) 154.4° X

Last Answer : Ans:(c)

If R is the radius of a main curve and L is the length of the transition curve, the shift of the curve, is (A) L/24 R (B) L2 /24 R (C) L3 /24 R (D) L4 /24 R

Description : If R is the radius of a main curve and L is the length of the transition curve, the shift of the curve, is (A) L/24 R (B) L2 /24 R (C) L3 /24 R (D) L4 /24 R

Last Answer : Answer: Option B

If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum perpendicular offset for the transition curve, is (A) 0.70 m (B) 1.70 m (C) 2.70 m (D) 3.70 m

Description : If the length of a transition curve to be introduced between a straight and a circular curve of  radius 500 m is 90 m, the maximum perpendicular offset for the transition curve, is  (A) 0.70 m  (B) 1.70 m  (C) 2.70 m  (D) 3.70 m

Last Answer : (C) 2.70 m 

If the rate of gain of radial acceleration is 0.3 m per sec3 and full centrifugal ratio is developed. On the curve the ratio of the length of the transition curve of same radius on road and railway, is (A) 2.828 (B) 3.828 (C) 1.828 (D) 0.828

Description : If the rate of gain of radial acceleration is 0.3 m per sec3 and full centrifugal ratio is developed. On the curve the ratio of the length of the transition curve of same radius on road and railway, is (A) 2.828 (B) 3.828 (C) 1.828 (D) 0.828

Last Answer : (A) 2.828

The total length of a valley formed by two gradients - 3% and + 2% curve between the two tangent points to provide a rate of change of centrifugal acceleration 0.6 m/sec2 , for a design speed 100 kmph, is (A) 16.0 m (B) 42.3 m (C) 84.6 m (D) None of these

Description : The total length of a valley formed by two gradients - 3% and + 2% curve between the two tangent points to provide a rate of change of centrifugal acceleration 0.6 m/sec2 , for a design speed 100 kmph, is (A) 16.0 m (B) 42.3 m (C) 84.6 m (D) None of these

Last Answer : Answer: Option C

If D is the degree of the curve of radius R, the exact length of its specified chord, is (A) Radius of the curve × sine of half the degree (B) Diameter of the curve × sine of half the degree (C) Diameter of the curve × cosine of half the degree (D) Diameter of the curve × tangent of half the degree

Description : If D is the degree of the curve of radius R, the exact length of its specified chord, is (A) Radius of the curve sine of half the degree (B) Diameter of the curve sine of half the ... Diameter of the curve cosine of half the degree (D) Diameter of the curve tangent of half the degree

Last Answer : (B) Diameter of the curve × sine of half the degree

The tangent length of a simple circular curve of radius R (A) R tan (B) R tan (C) R sin (D) R sin

Description : The tangent length of a simple circular curve of radius R (A) R tan (B) R tan (C) R sin (D) R sin

Last Answer : Answer: Option B

In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Description : In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Last Answer : Answer: Option C

The radius of a simple circular curve is 300 m and length of its specified chord is 30 m. The degree of the curve is (A) 5.73° (B) 5.37° (C) 3.57° (D) 3.75°

Description : The radius of a simple circular curve is 300 m and length of its specified chord is 30 m. The degree of the curve is (A) 5.73° (B) 5.37° (C) 3.57° (D) 3.75°

Last Answer : (A) 5.73°

Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 degree (C) For every degree decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Last Answer : Answer: Option D

The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve

Description : The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve

Last Answer : Answer: Option D

For a curve of radius 100 m and normal chord 10 m, the Rankine's deflection angle, is (A) 0°25'.95 (B) 0°35'.95 (C) 1°25'.53 (D) 2°51'.53

Description : For a curve of radius 100 m and normal chord 10 m, the Rankine's deflection angle, is (A) 0°25'.95 (B) 0°35'.95 (C) 1°25'.53 (D) 2°51'.53

Last Answer : (D) 2°51'.53

In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Description : In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Last Answer : Answer: Option D

If the ruling gradient is 1 in 150 on a particular section of a broad gauge track, the allowable ruling gradient on a 4° curve in the track will be :

Description : If the ruling gradient is 1 in 150 on a particular section of a broad gauge track, the allowable ruling gradient on a 4° curve in the track will be : (a) 0.51% (b) 0.53% (c) 0.61% (d) 0.67%

Last Answer : (a) 0.51%

The angle of intersection of a curve is the angle between (A) Back tangent and forward tangent (B) Prolongation of back tangent and forward tangent (C) Forward tangent and long chord (D) Back tangent and long chord

Description : The angle of intersection of a curve is the angle between (A) Back tangent and forward tangent (B) Prolongation of back tangent and forward tangent (C) Forward tangent and long chord (D) Back tangent and long chord

Last Answer : (A) Back tangent and forward tangent

In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is (A) 2 (B) 3 (C) 4/3 (D) 3/2

Description : In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is (A) 2 (B) 3 (C) 4/3 (D) 3/2

Last Answer : (D) 3/2

If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Description : If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Last Answer : Answer: Option B

Find the point on the curve` y^(2) = x` at which the tangent drawn makes an angle of `45^(@)` from X-axis.

Description : Find the point on the curve` y^(2) = x` at which the tangent drawn makes an angle of `45^(@)` from X-axis.

Last Answer : Find the point on the curve` y^(2) = x` at which the tangent drawn makes an angle of `45^(@)` from X-axis.

When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Description : When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Last Answer : (2) a line perpendicular to the plane of rotation

Designation of a curve is made by: (A) Angle subtended by a chord of any length (B) Angle subtended by an arc of specified length (C) Radius of the curve (D) Curvature of the curve

Description : Designation of a curve is made by:  (A) Angle subtended by a chord of any length  (B) Angle subtended by an arc of specified length  (C) Radius of the curve  (D) Curvature of the curve 

Last Answer : (C) Radius of the curve 

If the radii of a compound curve and a reverse curve are respectively the same, the length of common tangent (A) Of compound curve will be more (B) Of reverse curve will be more (C) Of both curves will be equal (D) None of these

Description : If the radii of a compound curve and a reverse curve are respectively the same, the length of common tangent (A) Of compound curve will be more (B) Of reverse curve will be more (C) Of both curves will be equal (D) None of these

Last Answer : Answer: Option C

A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°

Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium  the angle between the inclined bars must be  (A) 3°  (B) 45°  (C) 90°  (D) 120° 

Last Answer : (D) 120° 

If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Description : If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Last Answer : Answer: Option D

If the radius of a simple curve is 600 m, the maximum length of the chord for calculating offsets, is taken (A) 15 m (B) 20 m (C) 25 m (D) 30 m

Description : If the radius of a simple curve is 600 m, the maximum length of the chord for calculating offsets, is  taken  (A) 15 m  (B) 20 m  (C) 25 m  (D) 30 m

Last Answer : (D) 30 m

If the ruling gradient on any highway is 3%, the gradient provided on the curve of 300 metre radius, is (A) 2.00 % (B) 2.25 % (C) 2.50 % (D) 2.75 %

Description : If the ruling gradient on any highway is 3%, the gradient provided on the curve of 300 metre radius, is (A) 2.00 % (B) 2.25 % (C) 2.50 % (D) 2.75 %

Last Answer : Answer: Option D

The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Last Answer : (B) 2 to 5°

If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Description : If the rate of change of grade permitted along a vertical curve is r and total change of grade is g%, the length L of the curve to be provided, is (A) L = (r × 100/g) m (B) L = (g × 100/r) m (C) L = (r + g) × 100m (D) L = [100/(r + g)] m

Last Answer : Answer: Option B

A 3% downgrade curve is followed by a 1% upgrade curve and rate of change of grade adopted is 0.1% per 20 m length. The length of the respective vertical curve is : (a) 800 m (b) 200 m (c) 100 m (d) 400 m

Description : A 3% downgrade curve is followed by a 1% upgrade curve and rate of change of grade adopted is 0.1% per 20 m length. The length of the respective vertical curve is : (a) 800 m (b) 200 m (c) 100 m (d) 400 m

Last Answer : (a) 800 m

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

The density of water is 1000 kg/m3 at (A) 0° C (B) 0° K (C) 4° C (D) 20° C

Description : The density of water is 1000 kg/m3 at (A) 0° C (B) 0° K (C) 4° C (D) 20° C

Last Answer : Answer: Option C

Density of water is maximum at (A) 0° C (B) 0° K (C) 4° C

Description : Density of water is maximum at (A) 0° C (B) 0° K (C) 4° C

Last Answer : Answer: Option C

The tangent at any point P of a curve C meeta the x-axis at Q whose abscissa is positive and OP = OQ where O is origin, if C is a family of parabola h

Description : The tangent at any point P of a curve C meeta the x-axis at Q whose abscissa is positive and OP = OQ where O is origin, if C is a family of parabola h

Last Answer : The tangent at any point P of a curve C meeta the x-axis at Q whose abscissa is positive and OP = OQ ... , then find value of `(4(alpha+beta))/a` ?

Equation of tangent of the curve `y = 1 - e^(x//2)` at that point at which the curve crosses the y-axis, is :

Description : Equation of tangent of the curve `y = 1 - e^(x//2)` at that point at which the curve crosses the y-axis, is :

Last Answer : Equation of tangent of the curve `y = 1 - e^(x//2)` at that point at which the curve crosses the y-axis, is ... `2x+y = 1` C. `x=-2y` D. None of these