The unit of viscosity is (A) Metres² per sec (B) kg-sec/metre (C) Newton-sec per metre² (D) Newton-sec per meter

The unit of viscosity is
(A) Metres² per sec
(B) kg-sec/metre
(C) Newton-sec per metre²
(D) Newton-sec per meter
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Description : The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Last Answer : Answer: Option A

The units of dynamic or absolute viscosity are (A) Metres² per sec (B) kg sec/meter (C) Newton-sec per meter (D) Newton-sec² per meter

Description : The units of dynamic or absolute viscosity are (A) Metres² per sec (B) kg sec/meter (C) Newton-sec per meter (D) Newton-sec² per meter

Last Answer : Answer: Option C

The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec

Description : The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec

Last Answer : (B) Watt

The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Description : The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Last Answer : (A) kg/m. sec

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

Convert :  a. Exactly 1.5 atm to pascals  b. 89 kPa to newton per square metre (N m^(-2)) 

Description : Convert :  a. Exactly 1.5 atm to pascals  b. 89 kPa to newton per square metre (N m^(-2)) 

Last Answer : Convert : a. Exactly 1.5 atm to pascals b. 89 kPa to newton per square metre (N m-2) ... -100°C to Kelvin e. 0.124 torr to standard atmosphere

What is the name for the metric unit of pressure defined as 1 Newton per meter squared?

Description : What is the name for the metric unit of pressure defined as 1 Newton per meter squared?

Last Answer : ANSWER: PASCAL

The unit of work or energy in S.I. units is (A) Newton (B) Pascal (C) Kilogram meter (D) Joule

Description : The unit of work or energy in S.I. units is (A) Newton (B) Pascal (C) Kilogram meter (D) Joule

Last Answer : (D) Joule

If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Description : If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Last Answer : (A) C = w²l3 /24F²

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Last Answer : Answer: Option C

Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5(C) 7.0 (D) 7.5

Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5

Last Answer : Answer: Option B

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A

Which of the following is the unit of Astronomical Distance? (1) metre/sec. (2) Sec. (3) Para/sec. (4) Parsec

Description : Which of the following is the unit of Astronomical Distance? (1) metre/sec. (2) Sec. (3) Para/sec. (4) Parsec

Last Answer : (4) Parsec Explanation: A parsec is a unit of length used to measure large distances to objects outside our Solar System. One parsec is the distance at which one astronomical unit subtends an angle of one arc second. A parsec is equal to about 3.26 light-years in length.

Which of the following is the unit of Astronomical Distance ? (1) metre/sec. (2) Sec. (3) Para/sec. (4) Parsec

Description : Which of the following is the unit of Astronomical Distance ? (1) metre/sec. (2) Sec. (3) Para/sec. (4) Parsec

Last Answer : Parsec

Which of the following is not the unit of pressure? (A) kg/cm (B) atm (C) kg/cm²(D) Newton

Description : Which of the following is not the unit of pressure? (A) kg/cm (B) atm (C) kg/cm² (D) Newton

Last Answer : (D) Newton

Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Description : Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Last Answer : (A) (1/2π). √(g/r)

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

Surface tension has the units of (A) Newton-sec/mB) Newton-m/sec (C) Newton/m (D) Newton

Description : Surface tension has the units of (A) Newton-sec/m B) Newton-m/sec (C) Newton/m (D) Newton

Last Answer : Answer: Option C

Which of the following is not the unit of power? (A) kW (kilowatt) (B) hp (horse power) (C) kcal/sec (D) kcal/kg sec

Description : Which of the following is not the unit of power?  (A) kW (kilowatt)  (B) hp (horse power)  (C) kcal/sec  (D) kcal/kg sec 

Last Answer : (D) kcal/kg sec 

For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Description : For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Last Answer : Answer: Option D

Requirement of water for platform washing is a)5 litre per square metre per day * b)10 litre per square meter per day c) 15 litre per square metre per day d)20 litre per square metre per day

Description : Requirement of water for platform washing is a)5 litre per square metre per day * b)10 litre per square meter per day c) 15 litre per square metre per day d)20 litre per square metre per day

Last Answer : a)5 litre per square metre per day *

If force is expressed in Newton and the distance in metre, then the work done is expressed in -General Knowledge

Description : If force is expressed in Newton and the distance in metre, then the work done is expressed in -General Knowledge

Last Answer : Work done is expressed in force divided by distance. SI unit is joule. hope this helps u

A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where F is expressed in newton and s in metre.

Description : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where F is expressed in newton and s in metre.

Last Answer : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where ... and s in metre. Find the work done by the force.

Classify the following units into fundamental, supplementary and derived units:  newton, metre, candela

Description : Classify the following units into fundamental, supplementary and derived units:  newton, metre, candela

Last Answer : Classify the following units into fundamental, supplementary and derived units: newton, metre, candela, ... , volt, mol, coulomb, farad, steradian.

In order to avoid segregation, fresh concrete should be dropped from a height of [ A ] Less than one meter [ B ] Less than two metres [ C ] More than one metre [ D ] More than two metres

Description : In order to avoid segregation, fresh concrete should be dropped from a height of [ A ] Less than one meter [ B ] Less than two metres [ C ] More than one metre [ D ] More than two metres

Last Answer : [ A ] Less than one meter

One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Description : One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Last Answer : (B) gm/cm. sec

Unit of viscosity in CGS system is (A) gm .cm-1 sec-1 (B) gm . cm2 . sec-2 (C) gm .cm-2, sec-1 (D) gm . cm . sec-1

Description : Unit of viscosity in CGS system is (A) gm .cm-1 sec-1 (B) gm . cm2 . sec-2 (C) gm .cm-2, sec-1 (D) gm . cm . sec-1

Last Answer : Option A

A Newton is equal to which of the following? w) kilogram-meter per second x) meter per second squared y) kilogram-meter per second squared z) kilogram per meter-second

Description : A Newton is equal to which of the following? w) kilogram-meter per second x) meter per second squared y) kilogram-meter per second squared z) kilogram per meter-second

Last Answer : ANSWER: Y -- KILOGRAM-METER PER SECOND SQUARED

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2 , the side of the rod, is (A) 1 cm (B) 1.5 cm (C) 2 cm (D) 2.5 cm

Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The  extension in the rod was 1 mm only. If Esteel = 2 × 106  kg/cm2 , the side of the rod, is  (A) 1 cm  (B) 1.5 cm  (C) 2 cm  (D) 2.5 cm 

Last Answer : (C) 2 cm 

While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is: (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/cm2 Answer: Option

Description : While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at  the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is:  (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/c

Last Answer : (A) 960 kg/cm

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Description : The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Last Answer : (C) kg/litre

One cubit metre of cement weights [ A ] 1000 kg [ B ] 1200 kg [ C ] 1440 kg [ D ] 1600 kg

Description : One cubit metre of cement weights [ A ] 1000 kg [ B ] 1200 kg [ C ] 1440 kg [ D ] 1600 kg

Last Answer : [ C ] 1440 kg

If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Description : The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Last Answer : ANS: A

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span (A) 2.5 cm (B) 3.0 cm (C) 4.0 cm (D) 5.0 cm

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20  meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span  (A) 2.5 cm  (B) 3.0 cm  (C) 4.0 cm  (D) 5.0 cm 

Last Answer : (C) 4.0 cm

Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or SIRS. B. A cardiac index (CI) of 6 liters per minute per square meter of body surface, a pulmonary capillary wedge pressure of 15 mm. Hg, and a systemic vascular resistance index (SVRI) of 800 dynes-sec/(cm 5-m 2) is a hemodynamic profile consistent with septic shock. C. An increase in SvO 2 in septic patients may be explained by the finding of anatomic arteriovenous shunts. D. Results of human trials employing antimediator therapy, such as antiendotoxin antibodies, IL-1 receptor antagonist, and tumor necrosis factor (TNF) antibodies, have confirmed animal studies that demonstrate a significant im

Description : Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or ... animal studies that demonstrate a significant improvement in survival with the use of such agents.

Last Answer : Answer: AB DISCUSSION: Shock due to sepsis or SIRS frequently manifests as a hyperdynamic cardiovascular response, consisting of an elevated CI and a decreased SVR or SVRI. Occasionally, ... been encouraging thus far in human clinical trials, despite the promising results from many animal studies

The force per unit length is the unit of (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Description : The force per unit length is the unit of (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity

Last Answer : Answer: Option A

. Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

Tesla metre per ampere (T. m/A) is the unit for the measurement of (A) Magnetic susceptibility (B) Magnetic moment (C) Permeability of free space (D) Flux density

Description : Tesla metre per ampere (T. m/A) is the unit for the measurement of (A) Magnetic susceptibility (B) Magnetic moment (C) Permeability of free space (D) Flux density

Last Answer : Option C

Specific yield of well is a) Discharge per unit time b) Yield of well per metre of drawdown* c) Velocity of water per unit time d)None of the above

Description : Specific yield of well is a) Discharge per unit time b) Yield of well per metre of drawdown* c) Velocity of water per unit time d)None of the above

Last Answer : b) Yield of well per metre of drawdown*

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ