Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second
Last Answer : (A) 1 cm2 /second
Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke
Last Answer : (A) The S.I. unit of dynamic viscosity
Description : Unit of viscosity in CGS system is (A) gm .cm-1 sec-1 (B) gm . cm2 . sec-2 (C) gm .cm-2, sec-1 (D) gm . cm . sec-1
Last Answer : Option A
Description : The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke
Last Answer : Answer: Option B
Description : The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol
Last Answer : (B) Water
Description : The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec
Last Answer : (A) kg/m. sec
Description : Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes
Last Answer : (C) 1 stoke = 1 m2/sec
Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg
Last Answer : c. 10900 kg
Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec
Last Answer : (D) 0.2275 cm/sec
Description : The units of dynamic or absolute viscosity are (A) Metres² per sec (B) kg sec/meter (C) Newton-sec per meter (D) Newton-sec² per meter
Last Answer : Answer: Option C
Description : The unit of specific cake resistance is (A) gm/cm2 (B) cm/gm (C) cm/gm2 (D) gm/gm
Last Answer : (A) gm/cm2 (
Description : The unit of volumetric diffusivity is (A) cm2 /sec (B) cm/sec (C) cm3 /sec (D) cm2 /sec
Last Answer : (A) cm2 /sec
Description : Poise is the unit of (A) Surface tension (B) Capillarity (C) Viscosity (D) Shear stress in fluids
Description : Which of the following is the unit of kinematic viscosity? (A) Pascal (B) Poise (C) Stoke (D) Faraday
Description : A Poise is the unit of measure of which of the following? w) pressure x) viscosity y) force z) mass
Last Answer : ANSWER: X -- VISCOSITY
Description : Poise is converted into stoke by (A) Multiplying with density (gm/c.c) (B) Dividing by density (gm/c.c) (C) Multiplying with specific gravity (D) Dividing by specific gravity
Last Answer : (B) Dividing by density (gm/c.c)
Description : One poise is equal to (A) 0.1 N-s/m2 (B) 1 N-s/m2 (C) 10 N-s/m2 (D) 100 N-s/m2
Last Answer : Answer: Option A
Description : Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient). (A) V2 (B) 1/V2 (C) 1/Vg (D) Vg
Last Answer : Option D
Description : A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) ... ) One fourth as that of A (C) Twice as that of A (D) Four times as that of A
Last Answer : (B) One fourth as that of A
Description : Ordinary Portland cement requires a specific surface of [ A ] 1250 cm2/gm [ B ] 2250 cm 2/gm [ C ] 3250 cm 2/gm [ D ] 3500 cm 2/gm
Last Answer : [ B ] 2250 cm 2/gm
Description : The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec
Last Answer : (B) 10 -1 cm2 /sec
Description : A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630
Last Answer : (A) 7
Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these
Last Answer : (D) None of these
Description : Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4
Last Answer : b. gm-cm2
Description : Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke
Description : The viscosity of water at 20°C is (A) One stoke (B) One centistoke (C) One poise (D) One centipoise
Last Answer : Answer: Option D
Description : A ball weighing 250 gm is thrown vertically upwards with a velocity of 980 cm/sec. The time that the ball will take to return back to earth would be a.1 sec b.4 sec c.2 sec d.5 sec e.3 sec
Last Answer : c. 2 sec
Description : The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute
Last Answer : (A) cm/sec
Description : Absorption/scattering cross-section of an element is expressed in "barn", which is equivalent to (A) 10 -24 cm2 (B) 10 -12 cm (C) 1 Angstrom (D) 10 -24 cm
Last Answer : (A) 10 -24 cm
Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m
Description : Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2 . Which of the following polymers has the maximum film elongation (of the order of 100%)? (A) Water impermeable cellophane (B) Polythene (C) Cellulose acetate (D) Teflon
Last Answer : (B) Polythene
Description : The compressive strength of cement should not be less than about 110Kg/cm2 after three days & not less than 170Kg/cm2 after seven days. The fineness of an ordinary cement as determined by turbidimetric method should be about __________ cm2 /gm. (A) 800 (B) 1600 (C) 4000 (D) 8500
Last Answer : (B) 1600
Description : The unit of filter medium resistance is (A) cm-1 (B) gm/cm-1 (C) cm/gm-1 (D) gm-1
Last Answer : (A) cm-1
Description : Which of the following is expected to have the highest value (gm/m2 /yr) in a grassland ecosystem? (a) Secondary production (b) Tertiary production (c) Gross production (GP) (d) Net production (NP
Last Answer : (c) Gross production (GP)
Description : The unit of viscosity is (A) Metres² per sec (B) kg-sec/metre (C) Newton-sec per metre² (D) Newton-sec per meter
Description : What is considered the threshold of audibility at 3000 Hz? A. 10-12 W/m2 B. 10-16 W/m2 C. 10-12 W/cm2 D. 10-15 W/cm2
Last Answer : A. 10-12 W/m2
Description : Stress may be expressed in Newtons (A) Per millimetre square (N/mm2 ) (B) Per centimetre square (N/cm2 ) (C) Per metre square (N/m2 ) (D) None of these
Last Answer : (A) Per millimetre square (N/mm2 )
Description : The live load to be considered for an inaccessible roof, is (A) Nil (B) 75 kg/m2 (C) 150 kg/cm2 (D) 200 kg/m
Description : Stoke is the unit of (A) Kinematic viscosity in C. G. S. units (B) Kinematic viscosity in M. K. S. units (C) Dynamic viscosity in M. K. S. units (D) Dynamic viscosity in S. I. units
Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ
Last Answer : (A) 3.6 AVS.ρ
Description : Research reactors are normally meant for (A) Producing high neutron flux 10 12 -10 13 neutrons/cm2 , sec and studying the effect of neutron bombardment on different materials (B) Accelerating the neutrons (C) Power generation (D) None of these
Last Answer : (A) Producing high neutron flux 10 12 -10 13 neutrons/cm2 , sec and studying the effect of neutron bombardment on different materials
Description : The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm2 /sec. (A) 0.25 (B) 2.5 (C) 1.25 (D) 0.0025
Last Answer : (A) 0.25
Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary
Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids
Description : If μ = absolute viscosity, N= speed of the journal and p = unit bearing pressure, then the bearing characteristic number is given by (A) μN/p (B) μp/N (C) pN/μ (D) μ/pN
Last Answer : (A) μN/p
Description : The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2
Last Answer : (c) N-m
Description : The unit of pressure in S.I. units is (a) kg/cm2 (b) mm of water column (c) pascal (d) dynes per square cm (e) bars
Last Answer : Answer : c
Description : If cosec |-sin |=l and sec |- cos |=m, prove that l2m2(l2+m2+3)=1 -Maths 9th
Last Answer : cosec(A) - sin(A) = l ⇒ 1/sin(A) - sin(A) = l ⇒ l² = 1/sin²(A) + sin²(A) - 2 --------- sec(A) - cos(A) = m ⇒ 1/cos(A) - cos(A) = m ⇒ m² = 1/cos²(A) + cos²(A) - 2 ---------- l²m² = [1/sin²(A) + ... A)) = = 1/(sin²(A)cos²(A)) ------------- ⇒ l²m² (l² + m² + 3) = sin²(A)cos²(A) / [sin²(A)cos²(A)] = 1
Description : Specific capacity or yield of wells, is generally expressed, as (A) m 3 per sec (B) m 3 /hour (C) m 3 /hour/m2 (D) m 3 /hour/m2 /m
Last Answer : (D) m 3 /hour/m2 /m
Description : Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure
Last Answer : (A) Kinematic viscosity