Description : The unit of viscosity is (A) Metres² per sec (B) kg-sec/metre (C) Newton-sec per metre² (D) Newton-sec per meter
Last Answer : Answer: Option B
Description : The units of dynamic or absolute viscosity are (A) Metres² per sec (B) kg sec/meter (C) Newton-sec per meter (D) Newton-sec² per meter
Last Answer : Answer: Option C
Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m
Description : Stoke is the unit of (A) Kinematic viscosity in C. G. S. units (B) Kinematic viscosity in M. K. S. units (C) Dynamic viscosity in M. K. S. units (D) Dynamic viscosity in S. I. units
Last Answer : Answer: Option A
Description : The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec
Last Answer : (B) Watt
Description : Surface tension has the units of (A) Newton-sec/m B) Newton-m/sec (C) Newton/m (D) Newton
Description : The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these
Last Answer : (D) None of these
Description : Classify the following units into fundamental, supplementary and derived units: newton, metre, candela
Last Answer : Classify the following units into fundamental, supplementary and derived units: newton, metre, candela, ... , volt, mol, coulomb, farad, steradian.
Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second
Last Answer : (A) 1 cm2 /second
Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550
Last Answer : (A) wQH/15
Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec
Last Answer : (D) 24 × 10-5 m3 /sec
Description : 12. Kinematic viscosity is the product of dynamic viscosity and the density of the liquid. A) Yes B) No
Last Answer : B
Description : Kinematic viscosity is dependent upon (A) Pressure (B) Distance (C) Density (D) Flow
Description : Which of the following is the unit of kinematic viscosity? (A) Pascal (B) Poise (C) Stoke (D) Faraday
Description : Kinematic viscosity is equal to (A) Dynamic viscosity/density (B) Dynamic viscosity × density (C) Density/dynamic viscosity (D) 1/dynamic viscosity × density
Description : Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density
Description : The kinematic viscosity is the (A) Ratio of absolute viscosity to the density of the liquid (B) Ratio of density of the liquid to the absolute viscosity (C) Product of absolute viscosity and density of the liquid (D) Product of absolute viscosity and mass of the liquid
Description : The ratio of absolute viscosity to mass density is known as (A) Specific viscosity (B) Viscosity index (C) Kinematic viscosity (D) Coefficient of viscosity
Description : The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke
Description : Convert : a. Exactly 1.5 atm to pascals b. 89 kPa to newton per square metre (N m^(-2))
Last Answer : Convert : a. Exactly 1.5 atm to pascals b. 89 kPa to newton per square metre (N m-2) ... -100°C to Kelvin e. 0.124 torr to standard atmosphere
Description : If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F
Last Answer : (A) C = w²l3 /24F²
Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg
Last Answer : (B) 250 kg
Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5
Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5
Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm
Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )
Description : Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)
Last Answer : (A) (1/2π). √(g/r)
Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg
Last Answer : c. 10900 kg
Description : The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec
Last Answer : (A) kg/m. sec
Description : Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes
Last Answer : (C) 1 stoke = 1 m2/sec
Description : The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head
Last Answer : (C) Kinematic viscosity
Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity
Last Answer : (A) Mass transfer co-efficient
Description : Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure
Last Answer : (A) Kinematic viscosity
Description : The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt
Last Answer : (B) Prandtl
Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density
Last Answer : (A) Boiling point
Description : Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these
Last Answer : (B) Kinematic viscosity
Description : Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these
Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke
Last Answer : (A) The S.I. unit of dynamic viscosity
Description : The dimension of kinematic viscosity is (A) ML -2T -1 (B) L 2T -1 (C) ML -2T -2 (D) None of these
Last Answer : (B) L 2T -1
Description : The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44
Last Answer : (D) 0.44
Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number
Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads
Description : Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number
Description : The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol
Last Answer : (B) Water
Description : What Is Kinematic Viscosity?
Last Answer : The kinematic viscosity is the ratio of absolute viscosity to the density of the liquid.
Description : If force is expressed in Newton and the distance in metre, then the work done is expressed in -General Knowledge
Last Answer : Work done is expressed in force divided by distance. SI unit is joule. hope this helps u
Description : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where F is expressed in newton and s in metre.
Last Answer : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where ... and s in metre. Find the work done by the force.
Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg
Last Answer : d. 932,000 kg
Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2 , the side of the rod, is (A) 1 cm (B) 1.5 cm (C) 2 cm (D) 2.5 cm
Last Answer : (C) 2 cm
Description : While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is: (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/c
Last Answer : (A) 960 kg/cm