If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the
total head, the required water horse power of the pump, is
(A) wQH/15
(B) wQH/360
(C) wQH/220
(D) wQH/550
by

1 Answer

Answer :

(A) wQH/15
by

Related questions

If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Description : If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Last Answer : (C) D = 0.97 to 1.22 Q

For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head of 30 m. The minimum required horse power, is (A) 10 H.P. (B) 15 H.P. (C) 18 H.P. (D) 20 H.P.

Description : For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head  of 30 m. The minimum required horse power, is  (A) 10 H.P.  (B) 15 H.P.  (C) 18 H.P.  (D) 20 H.P. 

Last Answer : (D) 20 H.P. 

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750

Last Answer : (A) 500

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

Runoff is measured in (A) Cubic metres (B) Cubic metres per sec. (C) Cubic metres per minute (D) Cubic metres per hour

Description : Runoff is measured in (A) Cubic metres (B) Cubic metres per sec. (C) Cubic metres per minute (D) Cubic metres per hour

Last Answer : Answer: Option B

If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Description : If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : Answer: Option D

If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Description : If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Last Answer : (A) C = w²l3 /24F²

The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. Flourish in the presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Description : The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. ... presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Last Answer : ANS: D

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity

If is unit weight of water, Q the discharge in cumecs, H the pump, the H.P. of the motor is (A) H.P. = /75 (B) H.P. = /4500 (C) H.P. = /75 H (D) H.P. = /4500 H

Description : If is unit weight of water, Q the discharge in cumecs, H the pump, the H.P. of the motor is (A) H.P. = /75 (B) H.P. = /4500 (C) H.P. = /75 H (D) H.P. = /4500 H

Last Answer : Answer: Option A

In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The reservoir will theoretically be silted in 240 years (B) The reservoir will start reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The ... reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

If average volume of sediment deposits is one-tenth million cubic metres per year in a reservoir of total capacity 10 million cubic metres, the dead storage will be filled up, in (A) 10 years (B) 15 years (C) 20 years (D) 25 years

Description : If average volume of sediment deposits is one-tenth million cubic metres per year in a reservoir of total capacity 10 million cubic metres, the dead storage will be filled up, in (A) 10 years (B) 15 years (C) 20 years (D) 25 years

Last Answer : (D) 25 years

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Description : For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is (A) wl²/4 (B) wl²/8 (C) wl²/12 (D) wl²/16

Last Answer : Answer: Option D

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Last Answer : Answer: Option C

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Description : The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Last Answer : ANS: A

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be __________ hp. (A) 0.5 (B) 2 (C) 4 (D) 1

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be __________ hp. (A) 0.5 (B) 2 (C) 4 (D) 1

Last Answer : (A) 0.5

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, then the new head will be __________ metres. (A) 2 (B) 4 (C) 8 (D) 5.5

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, then the new head will be __________ metres. (A) 2 (B) 4 (C) 8 (D) 5.5

Last Answer : (A) 2

Question No. 216 If the specific capacity of a well is 0.3183 × 10-3 per sec, the discharge from a well of 4 m diameter under a depression head of 4 m, is (A) 8 litres/sec (B) 10 litres/sec (C) 12 litres/sec (D) 16 litres/sec

Description : Question No. 216 If the specific capacity of a well is 0.3183 × 10-3 per sec, the discharge from a well of 4 m diameter under a depression head of 4 m, is (A) 8 litres/sec (B) 10 litres/sec (C) 12 litres/sec (D) 16 litres/sec

Last Answer : (D) 16 litres/sec

The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Description : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Last Answer : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of ... dimensions of box for minimum cost of construction.

For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Last Answer : Answer: Option D

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Last Answer : Answer: Option D

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Last Answer : Answer: Option C

For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in cumecs, Lea suggested the empirical formula (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Description : For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in  cumecs, Lea suggested the empirical formula  (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Last Answer : (B) D = 1.22 Q

In a 2280 m race Dinesh beats Aarav by 360 m or 6 seconds. In another race on the same track at the same speeds. Aarav and karthick start at one end while Dinesh starts at the opposite end. How many metres would Aarav have covered ,by the time Dinesh meets karthick given that Dinesh speed is 16 m/sec more than that of karthick a) 1140 m b) 2280 m c) 2460 m d) 1180 m

Description : In a 2280 m race Dinesh beats Aarav by 360 m or 6 seconds. In another race on the same track at the same speeds. Aarav and karthick start at one end while Dinesh starts at the opposite end. How many metres would Aarav ... is 16 m/sec more than that of karthick a) 1140 m b) 2280 m c) 2460 m d) 1180 m

Last Answer : B Aarav 's speed =360/6 =60 m/s Time taken by Aarav to cover 2280 m =2280/60= 38 seconds Dinesh 's speed = 2280/60=38 m/s karthick 's speed = 22m/s Time taken by Dinesh to meet karthick in ... direction: Distance covered by Aarav: =2280/(38+22) =2280/60 =38 seconds =(38*60)m =2280 m

People living at sea level have around 5 million RBC per cubic millimeter of their blood whereas those living at an altitude to 5400 metres have around 8 million. This is because at high altitude (a) people eat more nutritive food, therefore more RBCs are formed (b) people get pollution-free air to breath and more oxygen is available (c) atmospheric O2 level is less and hence more RBCs are needed to absorb the required amount of O2 to survive (d) there is more UV radiation which enhances RBC production.

Description : People living at sea level have around 5 million RBC per cubic millimeter of their blood whereas those living at an altitude to 5400 metres have around 8 million. This is because at high altitude ... required amount of O2 to survive (d) there is more UV radiation which enhances RBC production.

Last Answer : (c) atmospheric O2 level is less and hence more RBCs are needed to absorb the required amount of O2 to survive

Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5(C) 7.0 (D) 7.5

Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5

Last Answer : Answer: Option B

If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total discharge Q, the settling velocity, is (A) Q/H(B) Q/D(C) Q/(D × B) (D) Q/(L × B)

Description : If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total  discharge Q, the settling velocity, is  (A) Q/H (B) Q/D (C) Q/(D × B)  (D) Q/(L × B) 

Last Answer : (D) Q/(L × B) 

The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Description : The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Last Answer : e) all of the above*

Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Description : Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Last Answer : c) 500*

The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Description : The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Last Answer : Answer: Option A

The unit of viscosity is (A) Metres² per sec (B) kg-sec/metre (C) Newton-sec per metre² (D) Newton-sec per meter

Description : The unit of viscosity is (A) Metres² per sec (B) kg-sec/metre (C) Newton-sec per metre² (D) Newton-sec per meter

Last Answer : Answer: Option B

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

When no radiation shield is available, the operator should stand out of the primary x ray beam and a distance from the patient’s head of at LEAST: A. 0.5 metres B. 1 metre C. 1.5 metres D. 2 metres E. 3 metres

Description : When no radiation shield is available, the operator should stand out of the primary x ray beam and a distance from the patient’s head of at LEAST: A. 0.5 metres B. 1 metre C. 1.5 metres D. 2 metres E. 3 metres

Last Answer : Option C

The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Description : The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Last Answer : Answer: Option C

If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Description : If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Last Answer : Answer: Option D

One cubic metre of water weighs (A) 100 litres (B) 250 litres (C) 500 litres (D) 1000 litres

Description : One cubic metre of water weighs (A) 100 litres (B) 250 litres (C) 500 litres (D) 1000 litres

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 degree (C) For every degree decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Last Answer : Answer: Option D

For each storey of a building, the depth of exploration should be (A) 1 metre (B) 2 metres (C) 3 metres (D) 4 metres

Description : For each storey of a building, the depth of exploration should be (A) 1 metre (B) 2 metres (C) 3 metres (D) 4 metres

Last Answer : Option C

In order to avoid segregation, fresh concrete should be dropped from a height of [ A ] Less than one meter [ B ] Less than two metres [ C ] More than one metre [ D ] More than two metres

Description : In order to avoid segregation, fresh concrete should be dropped from a height of [ A ] Less than one meter [ B ] Less than two metres [ C ] More than one metre [ D ] More than two metres

Last Answer : [ A ] Less than one meter

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Description : The bulk density of aggregates, is generally expressed as (A) tonnes/cubic metre (B) kg/cubic metre (C) kg/litre (D) g/cm3

Last Answer : (C) kg/litre

Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed, the head developed is maximum which is known as shut-off head (C) At a particular speed the discharge at which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Last Answer : (D) All the above

Specific yield of well is a) Discharge per unit time b) Yield of well per metre of drawdown* c) Velocity of water per unit time d)None of the above

Description : Specific yield of well is a) Discharge per unit time b) Yield of well per metre of drawdown* c) Velocity of water per unit time d)None of the above

Last Answer : b) Yield of well per metre of drawdown*