When a tank containing liquid moves with an acceleration in the horizontal direction, then the free surface of the liquid (A) Remains horizontal (B) Becomes curved (C) Falls on the front end (D) Falls on the back end

When a tank containing liquid moves with an acceleration in the horizontal direction, then the
free surface of the liquid
(A) Remains horizontal
(B) Becomes curved
(C) Falls on the front end
(D) Falls on the back end
by

1 Answer

Answer :

Answer: Option C
by

Related questions

07. A closed tank is completely filled with an oil. If it is made to move with a horizontal acceleration, then the pressure at the back end will be more than that at the front end. A) Correct B) Incorrect

Description : 07. A closed tank is completely filled with an oil. If it is made to move with a horizontal acceleration, then the pressure at the back end will be more than that at the front end. A) Correct B) Incorrect

Last Answer : A

An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Description : An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Description : The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Last Answer : d. Does not rotate

For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (B) Is decreased

For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a two-hinged arch, if one of the supports settles down vertically, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

The surface of zero elevation around the earth, which is slightly irregular and curved, is known as (A) Mean sea level (B) Geoid surface (C) Level surface (D) Horizontal surface

Description : The surface of zero elevation around the earth, which is slightly irregular and curved, is known as (A) Mean sea level (B) Geoid surface (C) Level surface (D) Horizontal surface

Last Answer : (B) Geoid surface

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) Free surface ground water is subjected to atmospheric pressure (B) Water table surface rises and falls with seasons (C) Depth of water table is directly proportional to the rate of drawl of water (D) Level of water table remains stationary

Description : Pick up the incorrect statement from the following:  (A) Free surface ground water is subjected to atmospheric pressure  (B) Water table surface rises and falls with seasons  (C) ... directly proportional to the rate of drawl of water  (D) Level of water table remains stationary 

Last Answer : (D) Level of water table remains stationary 

If a body moves with a constant speed in a circle – (1) no work is done on it (2) no force acts on it (3) no acceleration is produced in it (4) its velocity remains constant

Description : If a body moves with a constant speed in a circle – (1) no work is done on it (2) no force acts on it (3) no acceleration is produced in it (4) its velocity remains constant

Last Answer : (4) its velocity remains constant Explanation: A body moving with a constant speed in a circle is an example of uniform circular motion. The velocity vector is constant in magnitude but ... magnitude or the direction constitutes a change in the velocity which leads to change in acceleration.

If a body moves with a constant speed in a circle (1) no work is done on it (2) no force acts on it (3) no acceleration is produced in it (4) its velocity remains constant

Description : If a body moves with a constant speed in a circle (1) no work is done on it (2) no force acts on it (3) no acceleration is produced in it (4) its velocity remains constant

Last Answer :  its velocity remains constant

A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A × d × a × 2g) (B) 2A × d × a × 2g) (C) 2A × - d × a × 2g) (D) 2A × 3/2 - 3/2)/Cd × a × 2g)

Description : A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A d a 2g) (B) 2A d ... 2g) (C) 2A - d a 2g) (D) 2A 3/2 - 3/2)/Cd a 2g)

Last Answer : Answer: Option C

When a vessel containing a liquid is heated, the level of liquid initially falls and then rises up. Why does it happen so? OR Describe the irregular expansion of liquid.

Description : When a vessel containing a liquid is heated, the level of liquid initially falls and then rises up. Why does it happen so? OR Describe the irregular expansion of liquid.

Last Answer : On heating the liquid water from 0 degree C to 4 degree C, it contracts so the level of liquid initially falls. But after 4 degree C it expands so liquid rises up.

As the ball falls towards the ground, its velocity A. increases B. decreases C. remains constant D. becomes zero

Description : As the ball falls towards the ground, its velocity A. increases B. decreases C. remains constant D. becomes zero

Last Answer :  increases

If we reverse the direction of electric current, then the direction of magnetic field will beA. reversedB. remains sameC. becomes tangentD. becomes norma

Description :  If we reverse the direction of electric current, then the direction of magnetic field will be A. reversed B. remains same C. becomes tangent D. becomes norma

Last Answer : reversed

An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Description : An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Last Answer : Answer: Option C

Find (i) the lateral or curved surface area of a closed cylindrical petrol storage tank that is 4.2 m in diameter and 4.5m high. -Maths 9th

Description : Find (i) the lateral or curved surface area of a closed cylindrical petrol storage tank that is 4.2 m in diameter and 4.5m high. -Maths 9th

Last Answer : Height of cylindrical tank, h = 4.5m Radius of the circular end , r = (4.2/2)m = 2.1m (i) the lateral or curved surface area of cylindrical tank is 2πrh = 2 (22/7) 2.1 4.5 m2 = (44 0.3 ... ) = 87.12 m2 This implies, S = 95.04 m2 Therefore, 95.04m2 steel was used in actual while making such a tank.

A particle of mass `m` and charge `q` moves with a constant velocity `v` along the positive `x` direction. It enters a region containing a uniform mag

Description : A particle of mass `m` and charge `q` moves with a constant velocity `v` along the positive `x` direction. It enters a region containing a uniform mag

Last Answer : A particle of mass `m` and charge `q` moves with a constant velocity `v` along the positive `x` direction. It enters ... `qaB//m` D. `q(b + a)B//2m`

The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope of the arch). (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with  a uniformly distributed load l t per horizontal length is (where Ic  is the M.I. at the crown, which  varies as the slope ... arch).  (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Last Answer : (D) 200/E

A ball is thrown horizontally from the top of a cliff. Assuming no air resistance, the acceleration of the ball while it is in flight is: w) in the vertical direction only x) in the horizontal direction only y) in the vertical and horizontal directions z) zero.

Description : A ball is thrown horizontally from the top of a cliff. Assuming no air resistance, the acceleration of the ball while it is in flight is: w) in the vertical direction only x) in the horizontal direction only y) in the vertical and horizontal directions z) zero.

Last Answer : ANSWER: W -- IN THE VERTICAL DIRECTION ONLY

Pick up the correct specification of Ramsden eyepiece from the following: (A) It consists of two equal piano convex lenses (B) The curved surfaces of Plano-convex lenses face each other (C) The distance between the diaphragm and the front lens of the eyepiece is kept equal to 1/4 th of the focal length of a lens so that rays from a point on the diaphragm enter the eye as a parallel beam (D) All the above

Description : Pick up the correct specification of Ramsden eyepiece from the following:  (A) It consists of two equal piano convex lenses  (B) The curved surfaces of Plano-convex lenses face each other  (C) ... from a point on the diaphragm enter the eye as a  parallel beam  (D) All the above 

Last Answer : (D) All the above 

If S denotes the area of the curved surface of a right circular cone of height h end semi-vertical angle a, then S equals -Maths 9th

Description : If S denotes the area of the curved surface of a right circular cone of height h end semi-vertical angle a, then S equals -Maths 9th

Last Answer : answer:

After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Description : After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Last Answer : ANSWER: Z -- REMAINS CONSTANT 

On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Description : On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Last Answer : • Horizontal straight line

Let angular value of one graduation of a tube of length be the radius of its internal curved surface, then (A) = x/206265 R (B) = R/206265 x (C) = 206265/x. R (D) = x. R/206265

Description : Let angular value of one graduation of a tube of length be the radius of its internal curved surface, then (A) = x/206265 R (B) = R/206265 x (C) = 206265/x. R (D) = x. R/206265

Last Answer : (A) = x/206265 R

A body moves, from rest with a constant acceleration of 5 m per sec. The distance covered in 5 sec is most nearly (A) 38 m (B) 62.5 m (C) 96 m (D) 124 m

Description : A body moves, from rest with a constant acceleration of 5 m per sec. The distance covered in 5 sec  is most nearly  (A) 38 m  (B) 62.5 m  (C) 96 m  (D) 124 m

Last Answer : (B) 62.5 m 

Pick up the correct statement from the following: (A) A level surface is perpendicular at all points to the direction of gravity (B) A level line lies in level surface (C) A horizontal surface is normal to the direction of gravity at only one point (D) All the above

Description : Pick up the correct statement from the following:  (A) A level surface is perpendicular at all points to the direction of gravity  (B) A level line lies in level surface  (C) A horizontal surface is normal to the direction of gravity at only one point  (D) All the above 

Last Answer : (D) All the above 

An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice(D) None of these

Description : An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice (D) None of these

Last Answer : Answer: Option B

When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Last Answer : Answer: Option C

The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the surface (C) Directly proportional to the length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Description : The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the ... length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface

Last Answer : Answer: Option B

When a cylindrical vessel containing liquid is resolved, the surface of the liquid takes the shape of (A) A triangle (B) A paraboloid (C) An ellipse (D) None of these

Description : When a cylindrical vessel containing liquid is resolved, the surface of the liquid takes the shape of (A) A triangle (B) A paraboloid (C) An ellipse (D) None of these

Last Answer : Answer: Option B

A car starts from rest and moves with constant acceleration. In first t seconds it covers distance x. Then distance covered by it in next t seconds wi

Description : A car starts from rest and moves with constant acceleration. In first t seconds it covers distance x. Then distance covered by it in next t seconds wi

Last Answer : A car starts from rest and moves with constant acceleration. In first t seconds it covers distance x. Then distance covered ... x B. 2 x C. 3 x D. 4 x

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Description : A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Last Answer : Answer: Option A

If the rate of a chemical reaction becomes slower at a given temperature, then the (A) Initial concentration of the reactants remains constant (B) Free energy of activation is lower(C) Entropy changes(D) Free energy of activation is higher

Description : If the rate of a chemical reaction becomes slower at a given temperature, then the (A) Initial concentration of the reactants remains constant (B) Free energy of activation is lower (C) Entropy changes (D) Free energy of activation is higher

Last Answer : (D) Free energy of activation is higher

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

Horizontal acceleration due to earthquake results in (A) Hydrodynamic pressure (B) Inertia force into the body of the dam (C) Both (A) and (B) (D) None of the above

Description : Horizontal acceleration due to earthquake results in (A) Hydrodynamic pressure (B) Inertia force into the body of the dam (C) Both (A) and (B) (D) None of the above

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Central portion of a cyclone acts as a chimney through which air gets lifted (B) Cyclonic precipitation caused by a warm front is generally continuous (C) Greatest amount of orographic precipitation falls in the windward side of the barrier (D) All the above

Description : Pick up the correct statement from the following: (A) Central portion of a cyclone acts as a chimney through which air gets lifted (B) Cyclonic precipitation caused by a warm front is ... Greatest amount of orographic precipitation falls in the windward side of the barrier (D) All the above

Last Answer : Option D

A proton moves in a uniform magnetic field in a circular path of radius R. If the energy of proton is doubled then the new radius becomes a) R √2 b) 2R c) R 2 d) √2 R

Description : A proton moves in a uniform magnetic field in a circular path of radius R. If the energy of proton is doubled then the new radius becomes a) R √2 b) 2R c) R 2 d) √2 R

Last Answer : d) √2 R

The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom of the pond becomes cool and rises to the surface due to convection Which of the above statements is/are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Description : The surface of water in a pond remains cool even on a hot day because 1. water evaporates at the surface and evaporation causes cooling 2. the heat absorbed at the surface is transmitted downwards 3. Water in contact with the bottom ... /are correct? (a) 1 only (b) 3 only (c) 1 and 3 (d) 1, 2 and 3

Last Answer : Ans:(a)

When a detergent is added to pure water, its surface tension – (1) increases (2) decreases (3) remains constant (4) becomes infinite

Description : When a detergent is added to pure water, its surface tension – (1) increases (2) decreases (3) remains constant (4) becomes infinite

Last Answer : (2) decreases Explanation: When Soaps and detergents are added to water, they weaken the strength of the skin on the water's surface due to surface tension by interfering with hydrogen bonding ... of the soap or detergent is also attracted to the water, thereby decreasing the surface tension.

When a detergent is added to pure water, its surface tension (1) increases (2) decreases (3) remains constant (4) becomes infinite

Description : When a detergent is added to pure water, its surface tension (1) increases (2) decreases (3) remains constant (4) becomes infinite

Last Answer : decreases

Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum remains constant. Reason Magnetic force acts perpe

Description : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum remains constant. Reason Magnetic force acts perpe

Last Answer : Assertion When a charged particle moves perpendicular to a uniform magnetic field then its momentum ... Assertion is false but Reason is true.

Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less than normal. B. The reading is practically zero and remains there. C. The capacitor shows no charging action, but indicates a very high resistance. D. The pointer moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Description : Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less ... moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Last Answer : Answer: B

In what direction do rocks above anormal fault surface moves?

Description : In what direction do rocks above anormal fault surface moves?

Last Answer : Need answer

During the motion of a projectile fired from the earth surface, ______. (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Description : During the motion of a projectile fired from the earth surface, ______. (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Last Answer : (4) horizontal component of its velocity remains constant Explanation: The motion of a projectile is a two-dimensional motion-Horizontal motion and vertical motion-that take place independent ... continuously affects the vertical component, so the vertical motion is a uniformly accelerated motion.

During the motion of a projectile fired from the earth surface, _______ (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Description : During the motion of a projectile fired from the earth surface, _______ (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Last Answer : horizontal component of its velocity remains constant

An ovule which becomes curved so that the nucellus and embryo sac lie at right angles to the funicle is (a) hemitropous (b) campylotropous (c) anatropous (d) orthotropous.

Description : An ovule which becomes curved so that the nucellus and embryo sac lie at right angles to the funicle is (a) hemitropous (b) campylotropous (c) anatropous (d) orthotropous.

Last Answer : (a) hemitropous