Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow
Last Answer : Answer: Option C
Description : When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distance B) Increases linearly as ... as the square of the radial distance (D) Decreases as the square of the radial distance
Last Answer : Answer: Option A
Description : The intensity of pressure at any point, in a liquid, is (A) Directly proportional to the area of the vessel containing liquid (B) Directly proportional to the depth of liquid from the ... length of the vessel containing liquid (D) Inversely proportional to the depth of liquid from the surface
Last Answer : Answer: Option B
Description : The beam from a horizontally positioned cylindrical paraboloid is narrow in what plane?
Last Answer : . Vertical.
Description : The total pressure on the top of a closed cylindrical vessel completely filled up with a liquid is (A) Directly proportional to (radius)2 (B) Inversely proportional to (radius)2 (C) Directly proportional to (radius)4 (D) Inversely proportional to (radius)
Description : A conductor, due to sag between two supports, takes the form of (a) semi-circle (b) triangle (c) ellipse (d) catenary
Last Answer : (d) catenary
Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)
Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder
Description : What reflecting surface forms a geometrically perfect image of a point source located at infinity (such as that approximated by a star)? w) Paraboloid x) Ellipsoid y) spherical z) Hyperboloid
Last Answer : ANSWER: W -- PARABOLOID
Description : A circular slab subjected to external loading, deflects to form a (A) Semi-hemisphere (B) Ellipsoid (C) Paraboloid (D) None of these
Description : When a vessel containing a liquid is heated, the level of liquid initially falls and then rises up. Why does it happen so? OR Describe the irregular expansion of liquid.
Last Answer : On heating the liquid water from 0 degree C to 4 degree C, it contracts so the level of liquid initially falls. But after 4 degree C it expands so liquid rises up.
Description : A/an __________ system is exemplified by a vessel containing a volatile liquid in contact with its vapor. (A) Isolated (B) Closed (C) Open (D) None of these
Last Answer : (C) Open
Description : The bending moment diagram for a cantilever with U.D.L. over the whole span will be (a) Triangle (b) Rectangle (c) Parabola (d) Ellipse
Last Answer : (c) Parabola
Description : An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice (D) None of these
Description : The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square
Last Answer : a) Ellipse
Description : If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse
Last Answer : b) Square
Description : Non-recording rain gauges (A) Collect the rain whose volume is measured by means of graduated cylinders (B) Collect the rain which is directly measured by means of graduated cylinders in centimetres of water depth (C) Are generally used in hilly terrain (D) Are cylindrical in shape
Description : A nozzle is generally made of (A) Cylindrical shape (B) Convergent shape (C) Divergent shape (D) Convergent-divergent shape
Description : Buoys which support the cables to which vessels are attached are of (A) Cylindrical shape (B) Pear shaped (C) Spherical shape (D) All of these
Last Answer : (D) All of these
Description : Find the area of the sheet required to make closed cylindrical vessel of height 1 m and diameter 140 cm. -Maths 9th
Last Answer : Required sheet = T.S.A. of cyclinder = 2πr (h+r) = 2 × 22 / 7 × 70 / 100(1 + 70 / 100) = 2 × 22 × 0.1 × 1.7 = 7.48 m2
Description : A cylindrical vessel can hold 154 g of water. If the radius of its base is 3.5 cm, and 1 cm3 of water weighs lg,find the depth of water. -Maths 9th
Last Answer : Since 1 cm3 of water weighs 1 g. ∴ Volume of cyclinder vessel = 154 cm3 πr2h = 154 h = 154 × 7 / 22 × 3.5 × 3.5 h ;= 4 cm Hence, the depth of water is 4 cm.
Description : A cylindrical vessel of diameter 12 cm contains `800picm^(3)` of water. A cylindrical glass piece of diameter `8.0cm` and height ``8.0 cm is placed in
Last Answer : A cylindrical vessel of diameter 12 cm contains `800picm^(3)` of water. A cylindrical glass piece of diameter ... is 1.50 and that of water is 1.33.
Description : Which welded joint used in the circumferential joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None
Last Answer : (ii) Lap joint
Description : Welded joint used in the longitudinal joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None
Last Answer : (i) Butt joint
Description : An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these
Description : When a tank containing liquid moves with an acceleration in the horizontal direction, then the free surface of the liquid (A) Remains horizontal (B) Becomes curved (C) Falls on the front end (D) Falls on the back end
Description : A hot liquid is kept in a big room. The logarithm of the numerical valueof the temperature difference between the liquid and the room is plotted against time. The plot will be very nearly a/an (A) Ellipse (B) Straight line (C) Parabola (D) Circular arc
Last Answer : (B) Straight line
Description : The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is (A) ½ (B) 1 (C) 1½ (D) 2
Last Answer : (D) 2
Description : A region in front of a paraboloid antenna. A. Transmission zone B. All of these C. Fraunhofer D. Fresnel
Last Answer : B. All of these
Description : How many major lobes are produced by a paraboloid reflector?
Last Answer : One.
Description : A horizontally truncated paraboloid antenna is used for what purpose?
Last Answer : Determine elevation.
Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel
Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity. Static fluid pressure does not depend on the shape, total mass, or surface area of the liquid.
Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity.
Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C
Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C
Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel
Last Answer : Surface area of the bottom of the vessel
Description : The locus of the moment of inertia about inclined axes to the principal axis, is (A) Straight line (B) Parabola (C) Circle (D) Ellipse
Last Answer : (D) Ellipse
Description : The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is (A) Circle (B) Parabola (C) Ellipse (D) Straight line
Last Answer : (C) Ellipse
Description : Which of the following is the locus of a point that moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one (A) Ellipse (B) Hyperbola (C) Parabola (D) Circle
Last Answer : (B) Hyperbola
Description : If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle
Last Answer : (C) A semi-ellipse
Description : The algebraic sum of the resolved parts of a number of forces in a given direction is equal to the resolved part of their resultant in the same direction. This is as per the principle of (A) Forces (B) Independence of forces (C) Dependence of forces (D) Resolution of forces
Last Answer : (D) Resolution of forces
Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally
Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero
Description : Choose the wrong statement (A) Fluids are capable of flowing (B) Fluids conform to the shape of the containing vessels (C) When in equilibrium, fluids cannot sustain tangential forces (D) When in equilibrium, fluids can sustain shear forces
Last Answer : Answer: Option D
Description : The viscosity of a liquid __________ its rate of flow through a hole in a vessel. (A) Effects (B) Does not effect (C) Both A and B (D) None of these
Description : What does liquid matter takes the shape of?
Last Answer : Need answer
Description : The cell is usually ____ in shape. • Triangular • Circular • Rectangular • Cylindrical
Last Answer : • Cylindrical
Description : From a vessel containing 100 litres of wine,10 litres are drawn out and an equal amount of water is added. From the mixture,10 litres is again drawn out and same quantity of water is added. What is the final ratio of wine and water? a) 91 : 9 b) 81 : 19 c) 80 : 20 d) 90 : 10 e) None of these
Last Answer : Quantity of wine after two replacements = 100 l × (90/100)2 =81 l Required ratio = 81 : ( 100 – 81 )= 81 : 19 Answer: b)
Description : Two vessels A and B contain sugar and rava in the ratio 4 : 3 and 2 : 3 respectively. Find the ratio in which these mixtures be mixed to obtain a new mixture in vessel C containing sugar and rava in the ratio 1 : 2? a) 2:9 b) 3:2 c) 7:9 d) 2:7 e) 7:4
Last Answer : E Let Cost Price(CP) of 1 kg sugar be Rs.1 Quantity of sugar in 1kg mixture from vessel A=4/7 Cost Price(CP) of 1kg mixture from vessel A = Rs. =4/7 Quantity of sugar in 1 kg mixture from vessel ... from vessel C=1/2 Cost Price(CP) of 1 kg mixture from vessel C(Mean Price) = Rs.=1/2
Description : An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible