Description : When the flow in an open channel is gradually varied, the flow is said to be (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow
Last Answer : Answer: Option B
Description : Gradually varied flow in open channel is a/an __________ flow. (A) Steady uniform (B) Steady non-uniform (C) Unsteady uniform (D) Unsteady non-uniform
Last Answer : (B) Steady non-uniform
Description : Gradually varying fluid flow is an example of __________ flow. (A) Non-steady uniform (B) Non-steady non-uniform (C) Steady uniform (D) Steady non-uniform
Last Answer : (A) Non-steady uniform
Description : General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow
Last Answer : Answer: Option D
Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above
Description : A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow
Last Answer : Answer: Option A
Description : A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow
Description : The flow of water through the hole in the bottom of a wash basin is an example of (A) Steady flow (B) Uniform flow (C) Free vortex (D) Forced vortex
Last Answer : Answer: Option C
Description : The flow in which conditions do not change with time at any point, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : A flow in which each liquid particle has a definite path, and the paths of individual particles do not cross each other, is called (A) Steady flow (B) Uniform flow (C) Streamline flow (D) Turbulent flow
Description : When the flow parameters at any given instant remain same at every point, then flow is said to be (A) Quasi-static (B) Steady state (C) Laminar (D) Uniform
Description : The flow in which the velocity vector is identical in magnitude and direction at every point, for any given instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : Uniform flow occurs when (A) The flow is steady (B) The flow is streamline (C) Size and shape of the cross section in a particular length remain constant (D) Size and cross section change uniformly along length
Description : Normal depth in open channel flow is the depth of flow corresponding to (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Uniform flow
Description : The flow which neglects changes in a transverse direction is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : The flow in which the particles of a fluid attain such velocities that varies from point to point in magnitude and direction as well as from instant to instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow
Description : During the opening of a valve in a pipe line, the flow is (A) Steady (B) Unsteady (C) Uniform (D) Laminar
Description : In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction
Description : The equation of continuity holds good when the flow (A) Is steady (B) Is one dimensional (C) Velocity is uniform at all the cross sections (D) All of the above
Description : A flow through a long pipe at decreasing rate is called __________ uniform flow. (A) Steady (B) Unsteady (C) Both A and B (D) None of these
Description : A one dimensional flow is one which (A) Is uniform flow (B) Is steady uniform flow (C) Takes place in straight lines (D) Involves zero transverse component of flow
Description : Fluid flow at increasing rate through a diverging pipe is an example of __________ flow. (A) Steady uniform (B) Non-steady uniform (C) Steady non-uniform (D) Non-steady non-uniform
Last Answer : (D) Non-steady non-uniform
Description : The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform
Last Answer : (B) Steady non uniform
Description : Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate
Last Answer : (D) Expanding tube at constant rate
Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe
Last Answer : (C) Steadily decreasing flow through a reducing section
Description : Water flow in the river during flood can be categorised as the __________ flow. (A) Unsteady uniform (B) Unsteady non-uniform (C) Steady uniform (D) Steady non-uniform
Last Answer : Option B
Description : To ensure uniform pressure distribution, the thickness of the foundation, is A) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge
Description : Overland flow drainage on and from the tarmac of an airport invokes, in its design, principles involving : (a) Spatially varied flow without hydraulic jumps (b) Backwater flow (c) ... throughout (d) Attention to rolling flows within spatially varied flows and possibly to moving hydraulic jumps
Last Answer : (a) Spatially varied flow without hydraulic jumps
Description : Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is ... A, C, D (B) B, D, E (C) A, B, E (D) A, D, E
Last Answer : (C) A, B, E
Description : Nature of fluid flow during the opening of a valve in a pipeline is (A) Laminar (B) Unsteady (C) Steady (D) Uniform
Last Answer : (B) Unsteady
Description : One dimensional fluid flow implies the (A) Flow in straight lines only (B) Uniform flow (C) Steady uniform flow (D) Flow in which transverse components are zero
Last Answer : (D) Flow in which transverse components are zero
Description : Steady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at constant rate (D) None of these
Last Answer : (A) Long pipe at constant rate
Description : One dimensional flow implies (A) Flow in a straight line (B) Steady uniform flow (C) Unsteady uniform flow (D) A flow which does not account for changes in transverse direction
Last Answer : (D) A flow which does not account for changes in transverse direction
Description : Normal depth in open channel flow is the depth of flow in the channel (A) Corresponding to uniform flow (B) Measured normal to the channel bed (C) Corresponding to steady flow (D) None of these
Last Answer : (A) Corresponding to uniform flow
Description : What Is The Difference Between The Unsteady Uniform Flow And Steady Uniform Flow?
Last Answer : Unsteady uniform flow - changes with time. Steady uniform flow - does not change with time.
Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero. A. Isentropic flow B. Isobaric flow C. Steady flow D. Uniform flow
Last Answer : Isentropic flow
Description : What is defined as a process during which a fluid flows through a control volume steadily? A. Transient-flow process B. Steady and uniform process C. Uniform-flow process D. Steady-flow process
Last Answer : Steady-flow process
Description : The index of compression n tends to reach ratio of specific heats y when (a) flow is uniform and steady (b) process is isentropic (c) process is isothermal (d) process ... specific heat does not change with temperature (e) process is isentropic and specific heat changes with temperature.
Last Answer : Answer : d
Description : Compare i) Steady and uniform flow ii) Laminar and turbulent flow
Last Answer : Steady flow:- The flow is said to be steady when the flow characteristics, such as velocity, pressure, density and temperature do not change with time. Water flowing through a tap at a constant rate is an ... called as turbulent flow. e.g. The flow of river at the time of flood is turbulent flow.
Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow ... centrifugal pump, is always higher than that of volute type (D) All the above
Last Answer : (D) All the above
Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve
Description : 18. A flow through an expanding tube at increasing rate is called unsteady non-uniform flow. A) Yes B) No
Last Answer : A
Description : The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path
Description : Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane
Description : A flow in which the quantity of liquid flowing per second is not constant, is called (A) Streamline flow (B) Turbulent flow (C) Steady flow (D) Unsteady flow
Description : A flow in which the viscosity of fluid is dominating over the inertia force is called (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Turbulent flow
Description : In the case of steady flow of a fluid, the acceleration of any fluid particle is (A) Constant (B) Variable (C) Zero (D) Zero under limiting conditions
Description : Flow occurring in a pipeline when a valve is being opened is (A) Steady (B) Unsteady (C) Laminar (D) Vortex
Description : A flow in which the quantity of liquid flowing per second is constant, is called __________ flow. (A) Steady (B) Streamline (C) Turbulent (D) Unsteady
Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow