In a venturi-flume, the flow takes place at (A) Atmospheric pressure (B) Gauge pressure (C) Absolute pressure (D) None of these

In a venturi-flume, the flow takes place at
(A) Atmospheric pressure
(B) Gauge pressure
(C) Absolute pressure
(D) None of these
by

1 Answer

Answer :

Answer: Option A
by

Related questions

A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Description : A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Last Answer : Answer: Option B

13. A venturi flume is a flumed structure constructed across a channel by restricting its width. A) True B) False

Description : 13. A venturi flume is a flumed structure constructed across a channel by restricting its width. A) True B) False

Last Answer : A

The coefficient of venturi-flume, generally, lies between (A) 0.3 to 0.45 (B) 0.50 to 0.75 (C) 0.75 to 0.95 (D) 0.95 to 1.0

Description : The coefficient of venturi-flume, generally, lies between (A) 0.3 to 0.45 (B) 0.50 to 0.75 (C) 0.75 to 0.95 (D) 0.95 to 1.0

Last Answer : Answer: Option D

When the pressure intensity at a point is more than the local atmospheric pressure, then the difference of these two pressures is called (A) Gauge pressure (B) Absolute pressure (C) Positive gauge pressure (D) Vacuum pressure

Description : When the pressure intensity at a point is more than the local atmospheric pressure, then the difference of these two pressures is called (A) Gauge pressure (B) Absolute pressure (C) Positive gauge pressure (D) Vacuum pressure

Last Answer : Answer: Option C

Gauge pressure at a point is equal to the absolute pressure __________ the atmospheric pressure. (A) Plus (B) Minus (C) Divide (D) Multiply

Description : Gauge pressure at a point is equal to the absolute pressure __________ the atmospheric pressure. (A) Plus (B) Minus (C) Divide (D) Multiply

Last Answer : Answer: Option B

The pressure of a liquid measured with the help of a Piezometer tube is (A) Vacuum pressure (B) Gauge pressure (C) Absolute pressure (D) Atmospheric pressure

Description : The pressure of a liquid measured with the help of a Piezometer tube is (A) Vacuum pressure (B) Gauge pressure (C) Absolute pressure (D) Atmospheric pressure

Last Answer : Answer: Option B

The absolute pressure is equal to (A) Gauge pressure + atmospheric pressure (B) Gauge pressure - atmospheric pressure (C) Atmospheric pressure - gauge pressure (D) Gauge pressure - vacuum pressure

Description : The absolute pressure is equal to (A) Gauge pressure + atmospheric pressure (B) Gauge pressure - atmospheric pressure (C) Atmospheric pressure - gauge pressure (D) Gauge pressure - vacuum pressure

Last Answer : Answer: Option A

The pressure measured with the help of a pressure gauge is called (A) Atmospheric pressure (B) Gauge pressure (C) Absolute pressure (D) Mean pressure

Description : The pressure measured with the help of a pressure gauge is called (A) Atmospheric pressure (B) Gauge pressure (C) Absolute pressure (D) Mean pressure

Last Answer : Answer: Option B

Which of the following is correct?  A. Absolute pressure = Gauge pressure + Atmospheric pressure  B. Gauge pressure = Absolute pressure + Atmospheric pressure  C. Atmospheric pressure = Absolute pressure + Gauge pressure  D. Absolute pressure = Gauge pressure – Atmospheric pressure

Description : Which of the following is correct?  A. Absolute pressure = Gauge pressure + Atmospheric pressure  B. Gauge pressure = Absolute pressure + Atmospheric pressure  C. Atmospheric pressure = Absolute pressure + Gauge pressure  D. Absolute pressure = Gauge pressure – Atmospheric pressure

Last Answer : Answer: A

The pressure less than atmospheric pressure is known as (A) Suction pressure (B) Vacuum pressure (C) Negative gauge pressure (D) All of these

Description : The pressure less than atmospheric pressure is known as (A) Suction pressure (B) Vacuum pressure (C) Negative gauge pressure (D) All of these

Last Answer : Answer: Option D

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the

Description : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... velocity is lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

Last Answer : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

A water channel supported above the ground over trestles, is generally called (A) Flume (B) Canal (C) Aqueduct (D) Tunnel

Description : A water channel supported above the ground over trestles, is generally called  (A) Flume  (B) Canal  (C) Aqueduct  (D) Tunnel 

Last Answer : (A) Flume

10. In an external or internal mouthpiece, the absolute pressure head at vena contracta is zero when atmospheric pressure head is 10.3 m of water. A) Correct B) Incorrect

Description : 10. In an external or internal mouthpiece, the absolute pressure head at vena contracta is zero when atmospheric pressure head is 10.3 m of water. A) Correct B) Incorrect

Last Answer : A

In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

2. Differential manometer measures the (A) Absolute pressure (B) Gauge pressure (C) Pressure difference (D) Pressure gradien

Description : 2. Differential manometer measures the (A) Absolute pressure (B) Gauge pressure (C) Pressure difference (D) Pressure gradien

Last Answer : (C) Pressure difference

Define absolute pressure and gauge pressure. State the different units for pressure measurement.

Description : Define absolute pressure and gauge pressure. State the different units for pressure measurement.

Last Answer : Definition: Absolute pressure: Absolute pressure is defined as actual total pressure including atmospheric pressure actin On a surface. PAbsolute= PAtmospheric + PGauge Gauge pressure: Gauge pressure is defined ... mm of mercury column (blood pressure) inches of water Barmillibar (weather) Torr

What type of pressure cannot be used for Boyle’s Law?  a. Atmospheric Pressure  b. Gauge Pressure  c. Surface Pressure  d. Isobaric Pressure

Description : What type of pressure cannot be used for Boyle’s Law?  a. Atmospheric Pressure  b. Gauge Pressure  c. Surface Pressure  d. Isobaric Pressure

Last Answer : Gauge Pressure

Explain with neat labelled diagram measurement of flow using venturi meter

Description : Explain with neat labelled diagram measurement of flow using venturi meter

Last Answer : Explanation: It is a primary element of differential pressure Flow meters. 1) It consists of a straight inlet section, a converging conical inlet section, a cylindrical throat and diverging recovery ... abruptly, so permanent pressure loss or energy loss is very low as compared to orifice plate.

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

m and n are monsoon duration factor and catchment factor respectively. If P is yearly rainfall in cm, runoff can be calculated by (A) Velocity area method (B) Weir or spillway method (C) Use of venturi-meter (D) Using power plant consumption

Description : m and n are monsoon duration factor and catchment factor respectively. If P is yearly rainfall in  cm, runoff can be calculated by  (A) Velocity area method  (B) Weir or spillway method  (C) Use of venturi-meter  (D) Using power plant consumption 

Last Answer : (A) Velocity area method 

Most important method for calculating discharge for planning a water supply project, is (A) Velocity area method (B) Weir or spillway method (C) Use of venturi-meter (D) Using power plant consumption

Description : Most important method for calculating discharge for planning a water supply project, is  (A) Velocity area method  (B) Weir or spillway method  (C) Use of venturi-meter  (D) Using power plant consumption 

Last Answer : (A) Velocity area method

In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above

Description : In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above

Last Answer : Answer: Option D

Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Description : Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Last Answer : (A) 1

Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Description : Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Last Answer : Venturi Flow Meter vs Orifice Plate Meter

Dry-bulb temperature is: a. The absolute temperature corresponding to the atmospheric pressure b. The same as the wet-bulb temperature if the relative humidity is less than 100% c. Not required to find the relative humidity d. The temperature of the air measured with an ordinary thermometer e. The dew point temperature

Description : Dry-bulb temperature is: a. The absolute temperature corresponding to the atmospheric pressure b. The same as the wet-bulb temperature if the relative humidity is less than 100% c. Not required ... d. The temperature of the air measured with an ordinary thermometer e. The dew point temperature

Last Answer : Answer: D

Dew point can be best defined as the: a. Absolute temperature at which air, upon heating, will evaporate moisture b. . Percentage of moisture that air can hold at a given temperature and pressure c. . Temperature that air will begin to evaporate moisture d. . Temperature at which air, upon cooling, becomes saturated, causing moisture to condense should the temperature drop further e. . Atmospheric pressure at which air will condense moisture

Description : Dew point can be best defined as the: a. Absolute temperature at which air, upon heating, will evaporate moisture b. . Percentage of moisture that air can hold at a given temperature ... to condense should the temperature drop further e. . Atmospheric pressure at which air will condense moisture

Last Answer : Answer: D

Working principle of manometer comprises of balancing a coloumn of liquid against the pressure to be measured. Inclined tube manometer is especially used for the measurement of __________ pressure. (A) Small differential (B) Atmospheric (C) Absolute (D) Gage

Description : Working principle of manometer comprises of balancing a coloumn of liquid against the pressure to be measured. Inclined tube manometer is especially used for the measurement of __________ pressure. (A) Small differential (B) Atmospheric (C) Absolute (D) Gage

Last Answer : (A) Small differential

Manometers measure the __________ pressure. (A) Vacuum as well as the atmospheric (B) Difference in (C) Absolute (D) Gage

Description : Manometers measure the __________ pressure. (A) Vacuum as well as the atmospheric (B) Difference in (C) Absolute (D) Gage

Last Answer : (B) Difference in

Pick out the wrong statement. (A) In a static mass of liquid, the pressure at a point is the same for all liquids (B) Pressure decreases exponentially with elevation in an isothermal atmosphere(C) Atmospheric pressure = absolute pressure ‒ gage pressure(D) As per Pascal's law, the pressure at a point in a static or uniformlymoving fluid is equal in all directions

Description : Pick out the wrong statement. (A) In a static mass of liquid, the pressure at a point is the same for all liquids (B) Pressure decreases exponentially with elevation in an isothermal atmosphere (C) ... s law, the pressure at a point in a static or uniformly moving fluid is equal in all directions

Last Answer : (A) In a static mass of liquid, the pressure at a point is the same for all liquids

The difference between the absolute pressure and the atmospheric pressure is called the _____ pressure.  A. Gage  B. Normal  C. Standard  D. Vacuum

Description : The difference between the absolute pressure and the atmospheric pressure is called the _____ pressure.  A. Gage  B. Normal  C. Standard  D. Vacuum

Last Answer : Gage

What is the pressure below atmospheric pressure called?  A. Gage pressure  B. Absolute pressure  C. Atmospheric pressure  D. Vacuum pressure

Description : What is the pressure below atmospheric pressure called?  A. Gage pressure  B. Absolute pressure  C. Atmospheric pressure  D. Vacuum pressure

Last Answer : Vacuum pressure

What is considered as the actual pressure at a given position and is measured relative to absolute vacuum?  A. Gage pressure  B. Absolute pressure  C. Atmospheric pressure  D. Vacuum pressure

Description : What is considered as the actual pressure at a given position and is measured relative to absolute vacuum?  A. Gage pressure  B. Absolute pressure  C. Atmospheric pressure  D. Vacuum pressure

Last Answer : Absolute pressure

Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum pump c. Is the pressure loss over a given time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Description : Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum ... time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Last Answer : a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure

Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the vacuum pump c. Is the pressure loss over a given time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Description : Maximum Differential pressure: a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure b. Is the absolute pressure provided by the ... time limit d. Is the absolute pressure the cabin pressure ducting is designed to carry

Last Answer : a. Is the maximum authorized pressure difference between the inside of the fuselage and the atmospheric ambient pressure

Define absolute pressure, atmospheric pressure.

Description : Define absolute pressure, atmospheric pressure.

Last Answer : Absolute Pressure : Absolute pressure is defined as actual total pressure including atmospheric pressure acting on a surface  Unit of absolute pressure is pounds per square inch absolute and it ... by the air surrounding to the earth. Unit of atmospheric pressure is Pounds per square inch.

Rotameter is a device used to measure (A) Absolute pressure (B) Velocity of fluid (C) Flow (D) Rotation

Description : Rotameter is a device used to measure (A) Absolute pressure (B) Velocity of fluid (C) Flow (D) Rotation

Last Answer : Answer: Option C

Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Description : Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Last Answer : Answer: Option A

A compressor that takes suction at a pressure below atmospheric and discharge against atmospheric pressure is called a __________ pump. (A) Sump (B) Volute (C) Vacuum (D) Submerged

Description : A compressor that takes suction at a pressure below atmospheric and discharge against atmospheric pressure is called a __________ pump. (A) Sump (B) Volute (C) Vacuum (D) Submerged

Last Answer : (C) Vacuum

In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction

Description : In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction

Last Answer : Answer: Option B

A one dimensional flow is one which (A) Is uniform flow (B) Is steady uniform flow (C) Takes place in straight lines (D) Involves zero transverse component of flow

Description : A one dimensional flow is one which (A) Is uniform flow (B) Is steady uniform flow (C) Takes place in straight lines (D) Involves zero transverse component of flow

Last Answer : Answer: Option D

Operation of McLeod gauge used for low pressure measurement is based on the principle of (A) Gas law (B) Boyle's law (C) Charles law

Description : Operation of McLeod gauge used for low pressure measurement is based on the principle of (A) Gas law (B) Boyle's law (C) Charles law

Last Answer : Answer: Option B

Working principle of dead weight pressure gauge tester is based on (A) Pascal's law (B) Dalton's law of partial pressure (C) Newton's law of viscosity (D) Avogadro's hypothesis

Description : Working principle of dead weight pressure gauge tester is based on (A) Pascal's law (B) Dalton's law of partial pressure (C) Newton's law of viscosity (D) Avogadro's hypothesis

Last Answer : Answer: Option A

Pressure of the order of 10" torr can be measured by (A) Bourdon tube (B) Pirani Gauge (C) Micro-manometer (D) Lonisation gauge

Description : Pressure of the order of 10" torr can be measured by (A) Bourdon tube (B) Pirani Gauge (C) Micro-manometer (D) Lonisation gauge

Last Answer : Answer: Option D

Venturi meter is used to measure water, if

Description : Venturi meter is used to measure water, if

Last Answer : Ans.Water flow from the pipe

Which of the following is the treatment of water pollution? (1) Bag house filter (2) Windrow composting (3) Venturi scrubber (4) Reverse Osmosis

Description : Which of the following is the treatment of water pollution? (1) Bag house filter (2) Windrow composting (3) Venturi scrubber (4) Reverse Osmosis

Last Answer : (4) Reverse Osmosis Explanation: Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove ions, molecules, and larger particles from drinking water. It can ... of potable water. It is most commonly known for its use in drinking water purification form.

Sulphuric acid mist is arrested by using a __________ scrubber. (A) Packed wet (B) Hollow wet (C) Venturi (D) Co-current

Description : Sulphuric acid mist is arrested by using a __________ scrubber. (A) Packed wet (B) Hollow wet (C) Venturi (D) Co-current

Last Answer : (C) Venturi

The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Metallic wire mesh is used as a filtering medium for the separation of dust from dust laden gas in case of a/an (A) Air filter (B) Bag filter (C) Venturi scrubber (D) Hydrocyclones

Description : Metallic wire mesh is used as a filtering medium for the separation of dust from dust laden gas in case of a/an (A) Air filter (B) Bag filter (C) Venturi scrubber (D) Hydrocyclones

Last Answer : (A) Air filter