Most important method for calculating discharge for planning a water supply project, is (A) Velocity area method (B) Weir or spillway method (C) Use of venturi-meter (D) Using power plant consumption

Most important method for calculating discharge for planning a water supply project, is 

(A) Velocity area method 

(B) Weir or spillway method 

(C) Use of venturi-meter 

(D) Using power plant consumption 

by

1 Answer

Answer :

(A) Velocity area method

by

Related questions

m and n are monsoon duration factor and catchment factor respectively. If P is yearly rainfall in cm, runoff can be calculated by (A) Velocity area method (B) Weir or spillway method (C) Use of venturi-meter (D) Using power plant consumption

Description : m and n are monsoon duration factor and catchment factor respectively. If P is yearly rainfall in  cm, runoff can be calculated by  (A) Velocity area method  (B) Weir or spillway method  (C) Use of venturi-meter  (D) Using power plant consumption 

Last Answer : (A) Velocity area method 

A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Description : A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Last Answer : Answer: Option D

The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both

Description : The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both

Last Answer : Answer: Option A

A weir, generally, used as a spillway of a dam is (A) Narrow crested weir (B) Broad crested weir (C) Ogee weir (D) Submerged weir

Description : A weir, generally, used as a spillway of a dam is (A) Narrow crested weir (B) Broad crested weir (C) Ogee weir (D) Submerged weir

Last Answer : Answer: Option C

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

Coefficient of discharge of an ogee spillway (A) Depends on depth of approach and upstream slope (B) Depends on downstream apron interference and downstream submergence (C) Remains constant (D) Both (A) and (B

Description : Coefficient of discharge of an ogee spillway (A) Depends on depth of approach and upstream slope (B) Depends on downstream apron interference and downstream submergence (C) Remains constant (D) Both (A) and (B

Last Answer : Answer: Option D

Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Description : Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Last Answer : (B) Hot wire anemometer

A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Description : A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Last Answer : Answer: Option B

09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Description : 09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Last Answer : A

In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth

Description : In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth

Last Answer : Answer: Option C

06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Description : 06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Last Answer : A

The Francis formula for the discharge over Cipoletti weir is (A) 1.84 LH1/2 (B) 1.84 LH (C) 1.84 LH3/2 (D) 1.84 LH5/

Description : The Francis formula for the discharge over Cipoletti weir is (A) 1.84 LH1/2 (B) 1.84 LH (C) 1.84 LH3/2 (D) 1.84 LH5/

Last Answer : Answer: Option C

According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Description : According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Last Answer : Answer: Option A

When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Description : When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Last Answer : Answer: Option A

The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/(D) 1.71 Cd × L × H 3/

Description : The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/ (D) 1.71 Cd × L × H 3/

Last Answer : Answer: Option D

The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Description : The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Last Answer : (b) 2.25

Explain with neat labelled diagram measurement of flow using venturi meter

Description : Explain with neat labelled diagram measurement of flow using venturi meter

Last Answer : Explanation: It is a primary element of differential pressure Flow meters. 1) It consists of a straight inlet section, a converging conical inlet section, a cylindrical throat and diverging recovery ... abruptly, so permanent pressure loss or energy loss is very low as compared to orifice plate.

Which of the following methods is used to estimate flood discharge based on high water marks left over in the past? (A) Slope-area method (B) Area-velocity method (C) Moving boat method (D) Ultrasonic method

Description : Which of the following methods is used to estimate flood discharge based on high water marks left over in the past? (A) Slope-area method (B) Area-velocity method (C) Moving boat method (D) Ultrasonic method

Last Answer : Answer: Option A

Venturi meter is used to measure water, if

Description : Venturi meter is used to measure water, if

Last Answer : Ans.Water flow from the pipe

A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Description : A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Last Answer : (A) Circular

The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Description : The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Last Answer : Answer: Option C

Estimates of a water supply project depends upon the rate of water supply per capita consumption and probable population estimated at the end of the design period of (A) 5 to 10 years (B) 10 to 15 years (C) 15 to 20 years (D) 20 to 30 years

Description : Estimates of a water supply project depends upon the rate of water supply per capita consumption and probable population estimated at the end of the design period of (A) 5 to 10 years (B) 10 to 15 years (C) 15 to 20 years (D) 20 to 30 years

Last Answer : (D) 20 to 30 years

The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Description : The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Last Answer : (C) H5/2

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the

Description : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... velocity is lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

Last Answer : The pressure and velocity at the throat of a Venturi tube, measuring the flow of a liquid, are related to the upstream pressure and velocity, respectively, as follows: (A) Pressure is lower but ... lower (C) Both pressure and velocity are lower (D) Pressure and velocity are identical

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Description : In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Last Answer : Answer: Option D

Which of the following spillways is least suitable for an earthen dam? (A) Ogee spillway (B) Chute spillway (C) Side channel spillway (D) Shaft spillway

Description : Which of the following spillways is least suitable for an earthen dam? (A) Ogee spillway (B) Chute spillway (C) Side channel spillway (D) Shaft spillway

Last Answer : Answer: Option A

In case of non-availability of space due to topography, the most suitable spillway is (A) Straight drop spillway (B) Shaft spillway (C) Chute spillway (D) Ogee spillway

Description : In case of non-availability of space due to topography, the most suitable spillway is (A) Straight drop spillway (B) Shaft spillway (C) Chute spillway (D) Ogee spillway

Last Answer : Answer: Option B

Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Description : Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Last Answer : (A) Have greater capacity per unit of discharge area

Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss of head in the orifice to the head of water available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Last Answer : Answer: Option C

Why Calculating Mileage Between Cities Is Important When Planning a Road Trip?

Description : Why Calculating Mileage Between Cities Is Important When Planning a Road Trip?

Last Answer : When you are planning an exciting road trip that takes you to parts unknown, you may have many different things on your mind. You may be thinking about the different adventures you may have ... route. This important step can help to make your time on the road more comfortable and affordable.

The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Description : The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Last Answer : Answer: Option D

Coefficient of velocity is defined as the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Area of jet at vena contracta to the area of orifice (C) Actual discharge through an orifice to the theoretical discharge (D) None of the above

Description : Coefficient of velocity is defined as the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Area of jet at vena contracta to the area of orifice (C) Actual discharge through an orifice to the theoretical discharge (D) None of the above

Last Answer : Answer: Option A

What is a good source of equations for calculating discharge flowrates from accidental releases?

Description : What is a good source of equations for calculating discharge flowrates from accidental releases?

Last Answer : If you are interested in the calculation of discharge flow rates from accidental releases, read the online technical article Source Terms for Accidental Discharge Flow at the website below. It provides ... variety of common types of accidental gas or liquid releases and explains how to use them.

13. A venturi flume is a flumed structure constructed across a channel by restricting its width. A) True B) False

Description : 13. A venturi flume is a flumed structure constructed across a channel by restricting its width. A) True B) False

Last Answer : A

The coefficient of venturi-flume, generally, lies between (A) 0.3 to 0.45 (B) 0.50 to 0.75 (C) 0.75 to 0.95 (D) 0.95 to 1.0

Description : The coefficient of venturi-flume, generally, lies between (A) 0.3 to 0.45 (B) 0.50 to 0.75 (C) 0.75 to 0.95 (D) 0.95 to 1.0

Last Answer : Answer: Option D

In a venturi-flume, the flow takes place at (A) Atmospheric pressure (B) Gauge pressure (C) Absolute pressure (D) None of these

Description : In a venturi-flume, the flow takes place at (A) Atmospheric pressure (B) Gauge pressure (C) Absolute pressure (D) None of these

Last Answer : Answer: Option A

To determine the discharge at a section in a stream from its rating curve, the required data are (i) Slope of water surface at the section (ii) Stage at the section (ii) Current meter readings at the section The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) Only (ii) (D) Only (iii)

Description : To determine the discharge at a section in a stream from its rating curve, the required data are (i) Slope of water surface at the section (ii) Stage at the section (ii) Current meter readings at the section The correct ... ) (i) and (ii) (B) (ii) and (iii) (C) Only (ii) (D) Only (iii)

Last Answer : Answer: Option C

If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Description : If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : Answer: Option D

Calculating Fuel Consumption

Description : How to calculate fuel consumption? Can you add a formula? 

Last Answer : Let's say you drove 210 miles in a car and burned 18 gallons of fuel in the process, and you're wondering how much the car consumed in an average of 100 miles. The solution is as follows: ... . That is, the amount of fuel consumed divided by the number of kilometers traveled, multiplied by 100. 

Calculating Average Consumption

Description : How can I accurately calculate the average consumption of a car or motorcycle?

Last Answer : You can calculate your average consumption for 100 kilometers as follows. (fuel consumed / kilometer traveled) x 100.

Calculating Your Consumption?

Description : Calculating Your Consumption?

Last Answer : Using a fuel consumption calculator is a great way to test the efficiency of your car and to find out how much money you might be wasting on the rising price of gas. If you use a ... into getting some maintenance done to your vehicle or start looking into buying a more fuel efficient automobile.

Sulphuric acid mist is arrested by using a __________ scrubber. (A) Packed wet (B) Hollow wet (C) Venturi (D) Co-current

Description : Sulphuric acid mist is arrested by using a __________ scrubber. (A) Packed wet (B) Hollow wet (C) Venturi (D) Co-current

Last Answer : (C) Venturi

Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Description : Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Last Answer : (B) 10

If the radius of a simple curve is R, the length of the chord for calculating offsets by the method of chords produced, should not exceed. (A) R/10 (B) R/15 (C) R/20 (D) R/25

Description : If the radius of a simple curve is R, the length of the chord for calculating offsets by the method of  chords produced, should not exceed.  (A) R/10  (B) R/15  (C) R/20  (D) R/25 

Last Answer : (C) R/20 

While calculating the average depth of annual precipitation in a catchment basin, importance to individual rain-gauge station is given in (A) Arithmetical method (B) Thiessen's mean method (C) Isohyetal method (D) Both (b) and (c)

Description : While calculating the average depth of annual precipitation in a catchment basin, importance to individual rain-gauge station is given in (A) Arithmetical method (B) Thiessen's mean method (C) Isohyetal method (D) Both (b) and (c)

Last Answer : Answer: Option D

13. In a sharp-crested weir, the thickness of the weir is kept less than half of the height of water above the crest of the weir. A) True B) False

Description : 13. In a sharp-crested weir, the thickness of the weir is kept less than half of the height of water above the crest of the weir. A) True B) False

Last Answer : A