As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at (A) Lower level (B) Higher level (C) Same level (D) Any of the above depending on the design

As compared to crest of the normal portion of the weir, the crest of the under sluice portion of
weir is kept at
(A) Lower level
(B) Higher level
(C) Same level
(D) Any of the above depending on the design
by

1 Answer

Answer :

Answer: Option A
by

Related questions

13. In a sharp-crested weir, the thickness of the weir is kept less than half of the height of water above the crest of the weir. A) True B) False

Description : 13. In a sharp-crested weir, the thickness of the weir is kept less than half of the height of water above the crest of the weir. A) True B) False

Last Answer : A

The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both

Description : The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both

Last Answer : Answer: Option A

The top of the weir over which the water flows is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of these

Description : The top of the weir over which the water flows is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of these

Last Answer : Answer: Option A

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Description : 4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Last Answer : Answer: Option B

The upper surface of a weir over which water flows is known is (A) Crest (B) Nappy (C) Sill (D) Weir top

Description : The upper surface of a weir over which water flows is known is (A) Crest (B) Nappy (C) Sill (D) Weir top

Last Answer : Answer: Option C

A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option B

The condensing pressure due to the presence of non-condensable gases, as compared to that actually required forcondensing temperatures without non-condensable gases, (a) will be higher (b) will be lower (c) will remain unaffected (d) may be higher or lower depending upon the nature of non-condensable gases

Description : The condensing pressure due to the presence of non-condensable gases, as compared to that actually required forcondensing temperatures without non-condensable gases, (a) will be higher (b) will be ... remain unaffected (d) may be higher or lower depending upon the nature of non-condensable gases

Last Answer : Ans: a

The surface tension of mercury at normal temperature compared to that of water is (A) More (B) Less (C) Same (D) More or less depending on size of glass tube

Description : The surface tension of mercury at normal temperature compared to that of water is (A) More (B) Less (C) Same (D) More or less depending on size of glass tube

Last Answer : Answer: Option A

The density of seawater is greater than that of fresh water. A boat will float: w) Higher in fresh water than in seawater x) Lower in fresh water than in seawater y) At the same level in both z) Any of the above, depending upon its shape

Description : The density of seawater is greater than that of fresh water. A boat will float: w) Higher in fresh water than in seawater x) Lower in fresh water than in seawater y) At the same level in both z) Any of the above, depending upon its shape

Last Answer : ANSWER: X -- LOWER IN FRESH WATER THAN IN SEAWATER

The time oscillation of a floating body with increase in meatcentric height will be (A) Same (B) Higher (C) Lower (D) Lower/higher depending on weight of body

Description : The time oscillation of a floating body with increase in meatcentric height will be (A) Same (B) Higher (C) Lower (D) Lower/higher depending on weight of body

Last Answer : Answer: Option C

Viscosity of water in comparison to mercury is (A) Higher (B) Lower (C) Same (D) Higher/lower depending on temperature

Description : Viscosity of water in comparison to mercury is (A) Higher (B) Lower (C) Same (D) Higher/lower depending on temperature

Last Answer : Answer: Option A

The lowest outlet sluice in a dam is provided (A) Below the dead storage (B) On the top level of dead storage (C) On the top level of useful storage (D) At the centre of the dam

Description : The lowest outlet sluice in a dam is provided (A) Below the dead storage (B) On the top level of dead storage (C) On the top level of useful storage (D) At the centre of the dam

Last Answer : (B) On the top level of dead storage

The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg

Description : The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg

Last Answer : Answer: Option D

If there are two canals taking off from each flank of a river, then there will be (A) One divides wall and one under-sluice (B) One divides wall and two under-sluices (C) Two divide walls and one under-sluice (D) Two divide walls and two under-sluices

Description : If there are two canals taking off from each flank of a river, then there will be (A) One divides wall and one under-sluice (B) One divides wall and two under-sluices (C) Two divide walls and one under-sluice (D) Two divide walls and two under-sluices

Last Answer : Answer: Option D

The daily dose of estrogen for hormone replacement therapy in postmenopausal women is: A. Same as for contraception B. Higher than that for contraception C. Lower than that for contraception D. Variable depending on the age of the woman

Description : The daily dose of estrogen for hormone replacement therapy in postmenopausal women is: A. Same as for contraception B. Higher than that for contraception C. Lower than that for contraception D. Variable depending on the age of the woman

Last Answer : C. Lower than that for contraception

Dynamic friction as compared to static friction is (A) Same (B) More (C) Less (D) May be less of more depending on nature of surfaces and velocity

Description : Dynamic friction as compared to static friction is  (A) Same  (B) More  (C) Less  (D) May be less of more depending on nature of surfaces and velocity 

Last Answer : (C) Less 

Center of pressure compared to e.g. is (A) Above it (B) Below it (C) At same point (D) Above or below depending on area of body

Description : Center of pressure compared to e.g. is (A) Above it (B) Below it (C) At same point (D) Above or below depending on area of body

Last Answer : Answer: Option B

In a carburetor the level of the fuel in the float chamber as compared to the level of the main jet in the venture is A. lower B. same C. higher D. same or higher

Description : In a carburetor the level of the fuel in the float chamber as compared to the level of the main jet in the venture is A. lower B. same C. higher D. same or higher

Last Answer : ANSWER : A

In order to help prevent the development of an external rotation deformity of the hip in a patient who must remain in bed for any period of time, the most appropriate nursing action would be to use a) a trochanter roll extending from the crest of the ilium to the midthigh. A trochanter roll, properly placed, provides resistance to the external rotation of the hip. b) pillows under the lower legs. Pillows under the legs will not prevent the hips from rotating externally. c) a hip-abductor pillow. A hip-abductor pillow is used for the patient after total hip replacement surgery. d) a footboard. A footboard will not prevent the hips from rotating externally.

Description : In order to help prevent the development of an external rotation deformity of the hip in a patient who must remain in bed for any period of time, the most appropriate nursing action would be ... hip replacement surgery. d) a footboard. A footboard will not prevent the hips from rotating externally.

Last Answer : a) a trochanter roll extending from the crest of the ilium to the midthigh. A trochanter roll, properly placed, provides resistance to the external rotation of the hip.

Sluice valves are fitted in a distribution system (A) Along straight length of pipes at suitable intervals (B) At the junctions of the pipes (C) At the branching off points of sub-mains (D) All the above

Description : Sluice valves are fitted in a distribution system (A) Along straight length of pipes at suitable intervals (B) At the junctions of the pipes (C) At the branching off points of sub-mains (D) All the above

Last Answer : (D) All the above

Air inlet valve in water mains, is generally provided at (A) Summit of the pipe (B) Upstream of sluice valve (C) Downstream of sluice valve (D) Both (a) and (c) of above

Description : Air inlet valve in water mains, is generally provided at (A) Summit of the pipe (B) Upstream of sluice valve (C) Downstream of sluice valve (D) Both (a) and (c) of above

Last Answer : (D) Both (a) and (c) of above

Sluice valves in main water supplies (A) Are used to regulate the flow of water in pipes (B) Are spaced about 5 km apart (C) Are usually placed at the summits (D) All the above

Description : Sluice valves in main water supplies  (A) Are used to regulate the flow of water in pipes  (B) Are spaced about 5 km apart  (C) Are usually placed at the summits  (D) All the above 

Last Answer : (D) All the above 

Pressure relief valves are provided in water mains (A) To reduce the pressure (B) At low points (C) Upstream of sluice (D) All the above

Description : Pressure relief valves are provided in water mains  (A) To reduce the pressure  (B) At low points  (C) Upstream of sluice  (D) All the above 

Last Answer : (D) All the above 

In pressure supply mains, water hammer pressure is reduced by providing (A) Sluice valves (B) Air valves (C) Pressure relief valves (D) None of these

Description : In pressure supply mains, water hammer pressure is reduced by providing  (A) Sluice valves  (B) Air valves  (C) Pressure relief valves  (D) None of these 

Last Answer : (C) Pressure relief valves 

When the water level on the downstream side of a weir is above the top surface of a weir, the weir is known as (A) Narrow-crested weir (B) Broad-crested weir (C) Ogee weir (D) Submerged weir

Description : When the water level on the downstream side of a weir is above the top surface of a weir, the weir is known as (A) Narrow-crested weir (B) Broad-crested weir (C) Ogee weir (D) Submerged weir

Last Answer : Answer: Option D

The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Description : The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Last Answer : Answer: Option C

As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Description : As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Last Answer : Answer: Option A

The surface tension of mercury at normal temperature is __________ that of water. (A) Same as (B) Lower than (C) Higher than (D) None of these

Description : The surface tension of mercury at normal temperature is __________ that of water. (A) Same as (B) Lower than (C) Higher than (D) None of these

Last Answer : Answer: Option C

06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Description : 06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Last Answer : A

Assertion : Tibia is stronger and inner whereas fibula is the slander and outer bone of lower leg or shank. Reason : Tibia has a sharp crest in the sh

Description : Assertion : Tibia is stronger and inner whereas fibula is the slander and outer bone of lower leg or shank. Reason : Tibia has a sharp crest in the sh

Last Answer : Assertion : Tibia is stronger and inner whereas fibula is the slander and outer bone of lower leg or ... . D. If both Assertion and Reason are false.

If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be(A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Description : If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be (A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Last Answer : Answer: Option C

The refrigeration effect in a dry evaporator compared to flooded evaporator in a similar plant is (a) same (b) more (c) less (d) more or less depending on ambient conditions

Description : The refrigeration effect in a dry evaporator compared to flooded evaporator in a similar plant is (a) same (b) more (c) less (d) more or less depending on ambient conditions

Last Answer : Ans: c

The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Description : The air requirement of a petrol engine during starting compared to theoretical air required for complete combustion is a. more b. less c. same d. may be more or less depending on engine capacity

Last Answer : ANSWER b. less

At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Description : At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Last Answer : (C) Same

The work done in isothermal compression compared to that in adiabatic compression will be (A) Less (B) More (C) Same (D) More or less depending upon the extent of work done

Description : The work done in isothermal compression compared to that in adiabatic compression will be (A) Less (B) More (C) Same (D) More or less depending upon the extent of work done

Last Answer : (B) More

For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Description : For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Last Answer : Ans :d

The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Description : The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Last Answer : ANSWER a. higher

The self-ignition temperature of diesel as compared to petrol is a. higher b. lower c. same d. varies

Description : The self-ignition temperature of diesel as compared to petrol is a. higher b. lower c. same d. varies

Last Answer : ANSWER a. higher

Compared to fresh Water, the freezing point of sea water is - (1) Higher (2) Lower (3) Same (4) Depends on the sea from which the water is sourced

Description : Compared to fresh Water, the freezing point of sea water is - (1) Higher (2) Lower (3) Same (4) Depends on the sea from which the water is sourced

Last Answer : (2) Lower Explanation: Ocean water freezes just like freshwater, but at lower temperatures.

The yield point in static loading is ............... as compared to fatigue loading. (a) higher (b) lower (c) same

Description : The yield point in static loading is ............... as compared to fatigue loading. (a) higher (b) lower (c) same

Last Answer : (a) higher

A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Description : The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Last Answer : (A) Much lower

At the junction of sewers A. Top of smaller sewer is kept lower B. Top of larger sewer is kept lower C. Tops of both the sewers are at the same level D. None of these

Description : At the junction of sewers A. Top of smaller sewer is kept lower B. Top of larger sewer is kept lower C. Tops of both the sewers are at the same level D. None of these

Last Answer : ANS: D

While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Description : While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Last Answer : (B) Closed

Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Description : Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Last Answer : Answer: D

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size