Description : A fluid whose viscosity does not change with the rate of deformation or shear strain is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Last Answer : Answer: Option C
Description : According to Newton's law of viscosity, the shear stress on a layer of a fluid is __________ to the rate of shear strain. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these
Last Answer : Answer: Option B
Description : As per Newton's law of viscosity, the shear stress for a given rate of angular deformation of fluid is proportional to (where, μ = fluid viscosity) (A) 1/μ (B) μ (C) μ 2 (D) 1/μ
Last Answer : (B) μ
Description : Newton's law of viscosity relates the (A) Shear stress and velocity (B) Velocity gradient and pressure intensity (C) Shear stress and rate of angular deformation in a fluid (D) Pressure gradient and rate of angular deformation
Last Answer : (C) Shear stress and rate of angular deformation in a fluid
Description : Bulk modulus of a fluid is the ratio of (A) Shear stress to shear strain (B) Increase in volume to the viscosity of fluid (C) Increase in pressure to the volumetric strain (D) Critical velocity to the viscosity of fluid
Description : Newton's law of viscosity is a relationship between (A) Pressure, velocity and temperature (B) Shear stress and rate of shear strain (C) Shear stress and velocity (D) Rate of shear strain and temperature
Description : A fluid whose apparent viscosity increases with shear rate is termed as the __________ fluid. (A) Newtonian (B) Viscous (C) Dilatant (D) Non-viscous
Last Answer : (C) Dilatan
Description : In a static fluid (A) Resistance to shear stress is small (B) Fluid pressure is zero (C) Linear deformation is small (D) Only normal stresses can exist
Last Answer : Answer: Option D
Description : . A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid. (A) Newtonian (B) Non-Newtonian (C) Ideal (D) Incompressible
Last Answer : (A) Newtonian
Description : 16. The shear stress-strain graph for a Non-Newtonian fluid is a curve. A) Correct B) Incorrect
Last Answer : A
Description : The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical
Last Answer : Answer: Option A
Description : A Newtonian fluid is that (A) Which follows Newton's law of motion (B) Which needs a minimum shear, before it starts deforming (C) For which shear & deformation are related as T = µ (∂u/∂y) (D) None of these
Last Answer : (C) For which shear & deformation are related as T = µ (∂u/∂y)
Description : The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity
Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only
Last Answer : (b) 1 & 3 only
Description : The deformation of a spring produced by a unit load is called (A) Stiffness (B) Flexibility (C) Influence coefficient (D) Unit strain
Last Answer : (B) Flexibility
Description : Other parameters remaining same, the recrystallisation temperature of an alloy is lowered, when (A) Strain rate is increased (B) Grain size is increased (C) Prior cold deformation is increased (D) Not affected by any of the above parameters
Last Answer : (A) Strain rate is increased
Description : What type of motion the fluid element undergoes, when it changes from one position to another position, such that the angle between the two sides changes? (A) Rotation (B) Translation (C) Linear deformation (D) Angular deformation
Last Answer : (D) Angular deformation
Description : According to Whitney's theory, ultimate strain of concrete is assumed to be (A) 0.03 % (B) 0.1 % (C) 0.3 % (D) 3 %
Description : The shrinkage strain of concrete is generally taken as [ A ] 0.3 [ B ] 0.03 [ C ] 0.003 [ D ] 0.0003
Last Answer : [ D ] 0.0003
Description : Newton's law of viscosity is a relationship between (A) Shear stress and the rate of angular distortion (B) Shear stress and viscosity (C) Shear stress, velocity and viscosity (D) Pressure, velocity and viscosity
Description : Pick out the wrong statement. (A) Momentum transfer in laminar flow results from velocity gradient (B) A fluid in equilibrium is not free from shear stress (C) The viscosity of a non-Newtonian fluid is a function of temperature only (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid
Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity
Description : A Bingham fluid of viscosity μ = 10 Pa.s and yield stress, τ0 = 10 KPa, is shared between flat parallel plates separated by a distance of 10 -3 m. The top plate is moving with a velocity of 1 m/s. The shear stress on the plate is (A) 10 KPa (B) 20 KPa (C) 30 KPa (D) 40 KPa
Last Answer : (B) 20 KPa
Description : Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)
Last Answer : (B) Viscosity
Description : 03. If an incompressible liquid is continuously flowing through a pipe, the quantity of liquid passing per second is different at different sections. A) True B) False
Last Answer : B
Description : Lead pipe is (A) Especially resistant to solutions containing H2SO4 (B) Usually joined by burning (e.g. by melting to adjacent pieces with a torch) (C) Having very low elastic limit resulting in permanent deformation from either mechanical or thermal strain (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C
Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these
Last Answer : (A) Applies to elastic deformation
Description : The deformation of a solid when stress is applied is called a) Strain b) Elasticity c) Rigidity d) Pressure
Last Answer : a) Strain
Description : The deformation per unit length is called (a) Strain (b) Stress (c) Elasticity (d) None of these
Last Answer : (a) Strain
Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above
Description : The volumetric change of the fluid caused by a resistance is known as (A) Volumetric strain (B) Volumetric index (C) Compressibility (D) Adhesion
Description : The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance
Description : The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)
Last Answer : (D) Both (a) and (b)
Description : Shear strain energy theory for the failure of a material at elastic limit, is due to (A) Rankine (B) Guest or Trecas (C) St. Venant (D) Von Mises
Last Answer : (D) Von Mises
Description : If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs the ratio of inner diameter to outer diameter, is 17/64 (fs/N) (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5
Last Answer : (C) 1/4
Description : The under mentioned type is simple strain (A) Tensile strain (B) Compressive strain (C) Shear strain (D) All the above
Last Answer : (D) All the above
Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth
Last Answer : (a) Strain distribution being linear across the depth
Description : Which of the following theories of failure is most appropriate for a brittle material? (a) Maximum principal strain theory (b) Maximum principal stress theory (c) Maximum shear stress theory (d) Maximum strain energy theory
Last Answer : (b) Maximum principal stress theory
Description : Shear stress causes (a) Deformation (b) Distortion (c) Deformation as well as distortion (d) None
Last Answer : b) Distortion
Description : Shear stress causes (a) Deformation (b) Distortion (c) Displacement (d) None
Last Answer : (b) Distortion
Description : Shear stress causes (a) Deformation (b)Elongation (c) Contraction (d) None
Last Answer : (d) None
Description : When a bar is subjected to increase in temperature and its deformation is prevented, the stress induced in the bar is (a) Tensile (b) Compressive (c) Shear (d) None of the above
Last Answer : (b) Compressive
Description : When a bar is subjected to a change of temperature and its longitudinal deformation is prevented, the stress induced in the bar is (a) Tensile (b) Compressive (c) Shear (d) Temperature
Last Answer : (d) Temperature
Description : A fluid having no viscosity is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid
Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering the static load capacity of the sh (a) True (b) False
Last Answer : (a) True
Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering static load capacity of the shaft. a) True b) False
Last Answer : a) True
Description : There is sufficient plastic deformation prior to fatigue failure, which gives a warning well in advance. a) True b) False
Last Answer : b) False
Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)
Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder
Description : Viscous force is the __________ of shear stress due to viscosity and cross-section area of flow. (A) Sum (B) Different (C) Product (D) Ratio
Description : Poise is the unit of (A) Surface tension (B) Capillarity (C) Viscosity (D) Shear stress in fluids