Description : Broaching tools are usually made of (A) Cermets (B) High speed steel (C) Tungsten carbide (D) Stellite
Last Answer : Option B
Description : In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet? (A) Zirconia (B) Alumina (C) Bakelite (D) Tungsten carbi
Last Answer : Option D
Description : Which of the following has the highest modulus of elasticity (about 7 × 106 kg/cm2)? (A) High speed steel (B) Stainless steel (C) Tungsten carbide (D) Superalloys
Last Answer : (C) Tungsten carbide
Description : Powder metallurgy technique is used in the production of __________ tools. (A) Tungsten carbide (B) High carbon steel (C) High speed steel (D) Drilling
Last Answer : Option A
Description : Highest cutting speed is achieved by the __________ tool material. (A) High speed steel (B) Carbide (C) Cast alloy (D) Plain carbon steel
Last Answer : (B) Carbide
Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico
Description : _________ is the hardest material out of the following. (A) Boron carbide (B) Tungsten carbide (C) Hardened steel (D) Silicon carbide
Last Answer : (A) Boron carbide
Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel
Last Answer : (C) High speed steel
Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel
Last Answer : (C) Nickel-chrome steel
Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon
Last Answer : (D) Plain carbon
Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium
Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbid
Description : Which of the following is the most wear resistant grade of carbide used for the cutting tools? (A) Aluminium carbide (B) Tungsten carbide (C) Nickel carbide (D) Iron carbide
Description : The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above
Last Answer : (c) mild steel
Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies
Last Answer : (A) Small punches, broaches reamers and springs
Description : Are tungsten carbide prices going up?
Last Answer : I use tungsten carbide burrs on my rotary grinder and they have not changed in price in the last couple of years. I didn’t know they made jewelry out of tc, is it pretty?
Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (D) Molybdenum
Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium
Last Answer : (C) Tungsten
Description : Hypersil' is a __________ steel. (A) High speed (B) Silicon (C) Molybdenum (D) Tungsten
Last Answer : (B) Silicon
Description : 18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium
Last Answer : (B) Tungsten, chromium and vanadium
Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (C) Cobalt
Last Answer : (A) Molybdenum
Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel
Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool
Last Answer : (D) Non-ferrous cast alloy cutting tool
Description : The arcing contacts in a circuit breaker are made of (a) copper tungsten alloy (b) porcelain (c) electrolytic copper (d) aluminium alloy
Last Answer : (a) copper tungsten alloy
Description : Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel
Last Answer : High grade steel
Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel
Last Answer : (C) Invar
Description : Stainless steel is welded with difficulty because of (A) Its high melting temperature (B) Chances of cracking (C) Oxide film formation (D) Chromium carbide formation
Last Answer : Option C
Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials
Description : Cermets are used for making (A) Cutting tools (B) Abrasives (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Which of the following is not used as the ceramic material in ‘cermets’? (A) Silicides (B) Oxides (C) Carbides (D) Nitrides
Last Answer : (D) Nitrides
Description : Cermets are __________ materials. (A) Refractory (B) Reinforced (C) Abrasive (D) Fully metallic
Last Answer : (A) Refractory
Description : Combination of metals and ceramics are called (A) Metalloy (B) Cermets (C) Pellets (D) Non-crystalline ceramics
Last Answer : (B) Cermets
Description : Which of the following is not used as a bearing material? (A) Copper-lead alloys (B) Babbitts (C) Bronzes (D) Cermets
Description : What are some good soccer speed training drills?
Last Answer : One of the best things you can do is set up cones in your yard or public field and dribble the ball between and around them. This will help you be faster and more agile with the ball. Also, for pure speed training, practice sprinting between goals.
Description : Carbon is present in the combined form (carbide) in case of (A) Pig iron (B) Steel (C) Ferroalloys (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Decarburisation of steel (A) Is the removal of carbon from iron carbide (Fe3C) (B) Affects its crystalline structure (C) Is favoured by CO2 (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel
Last Answer : (A) Aluminium
Description : Clock pendulums are usually made of __________ steel. (A) High speed (B) Stainless (C) Heat resisting (D) None of these
Last Answer : (D) None of these
Description : Beams of hyperbolic cooling towers are made up of a) Tungsten b) Iron c) Stainless steel d) Brass
Last Answer : c) Stainless steel
Description : High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55
Last Answer : (B) 18-20
Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium
Last Answer : (B) Cobalt
Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility
Last Answer : (B) Cutting hardness
Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten
Last Answer : (B) Nickel and chromium
Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten
Last Answer : (D) Tungsten
Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt
Last Answer : (D) Cobalt
Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure
Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure
Description : Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten
Last Answer : (A) Chromium
Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel
Last Answer : (B) Lead
Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron
Last Answer : (A) Lead