Description : In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet? (A) Zirconia (B) Alumina (C) Bakelite (D) Tungsten carbi
Last Answer : Option D
Description : Spark plugs are made of (A) High alumina ceramic (B) Metallic carbides (C) Corundum (D) Carborundum
Last Answer : (A) High alumina ceramic
Description : Which of the following is not used as a bearing material? (A) Copper-lead alloys (B) Babbitts (C) Bronzes (D) Cermets
Description : Addition of __________ hastens the time of fruit bud differentiation in fruit plants: a. Nitrites b. Nitrides c. Nitrates d. All of these
Last Answer : Nitrates
Description : Cermets are used for making (A) Cutting tools (B) Abrasives (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Cermets are __________ materials. (A) Refractory (B) Reinforced (C) Abrasive (D) Fully metallic
Last Answer : (A) Refractory
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon stee
Last Answer : (C) Carbides
Description : Combination of metals and ceramics are called (A) Metalloy (B) Cermets (C) Pellets (D) Non-crystalline ceramics
Last Answer : (B) Cermets
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon steel
Last Answer : (A) Mild steel
Description : Secondary hardening in steels arises out of the (A) Precipitation of fine alloy carbides at high temperatures (B) Refinement of ferrite grain size by working (C) Decomposition of retained austenite upon heat treatment (D) Precipitation of complex inter-metallic upon heat treatment
Last Answer : Option C
Description : Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine ... alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite
Last Answer : Option A
Description : Drills are usually made of (A) Cermets (B) High speed steel (C) Alloy steel (D) Tungsten carbide
Last Answer : Option B
Description : Broaching tools are usually made of (A) Cermets (B) High speed steel (C) Tungsten carbide (D) Stellite
Description : Petroleum consists of a mixture of – (1) Carbohydrates (2) Carbonates (3) Hydrocarbons (4) Carbides
Last Answer : (3) Hydrocarbons Explanation: Petroleum (petroleum, from Latin: 'petra' (rock) + Latin: oleum (oil) or crude oil is a naturally occurring flammable liquid consisting of a complex mixture of ... variety of materials, and it is estimated that the world consumes about 88 million barrels each day.
Description : Petroleum consists of a mixture of (1) Carbohydrates (2) Carbonates (3) Hydrocarbons (4) Carbides
Last Answer : Hydrocarbons
Description : Pick out the correct statement: (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products (B) The operating cost of ... upon the specific gravity of the minerals (D) Asphalt is best crushed using toothed roll crusher
Last Answer : (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products
Description : Liners of a ball mill are never made of (A) Lead (B) Alloy steel (C) Rubber or ceramic material (D) Cast iron
Last Answer : (A) Lead
Description : Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool
Last Answer : (B) Glass wool and 85% magnesia
Description : Ceramic coating material for furnace refractory, which increases itsemissivity and thus the radiation heat transfer rate in the furnace, comprises of (A) Graphite powder (B) Thoria (C) Zircon powder (D) Beryllium
Last Answer : (C) Zircon powder
Description : Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon
Last Answer : (D) Teflon
Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool
Last Answer : (D) Non-ferrous cast alloy cutting tool
Description : A musical instrument that is made of ceramic material is
Last Answer : Ghatam / Jalatarang.
Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The heat treatment cycle is as follows; Increase temperature from 30 OC to 850 OC in 3 hours. ... efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50
Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30) = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8
Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance
Last Answer : (A) Higher melting points
Description : A pebble mill (A) Is a ball mill (B) Employs flints or ceramic pebbles as the grinding medium (C) Is a tube mill lined with ceramic or other non-metallic liner (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Ceramic materials are (A) Organic in nature (B) Stronger in compression than in tension (C) Always amorphous in nature (D) Always bad heat conductors
Last Answer : (B) Stronger in compression than in tension
Description : Ceramic recuperators are generally made of (A) Silicon carbide (B) Calcium carbide (C) Fireclay bricks (D) High alumina bricks
Last Answer : (A) Silicon carbide
Description : Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing
Last Answer : (A) Welding
Description : Sensible heat of hot industrial flue gases cannot be recovered by a/an (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) None of these
Last Answer : (D) None of these
Description : Which of the following is the most suitable for preheating combustion air above 650°C? (A) Regenerator (B) Metallic recuperator (C) Ceramic recuperator (D) None of these
Last Answer : (C) Ceramic recuperator
Description : Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side
Last Answer : (B) Occupy more space
Description : Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000
Last Answer : (B) 650
Description : Which of the following is not a continuous waste heat recovery equipment from the flue gases going out of furnace? (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) Waste heat boiler
Last Answer : (B) Regenerator
Description : Arsenic pollutant is not generated in __________industries. (A) Tanneries (B) Glass & ceramic (C) Beverages (D) Any of these
Last Answer : (C) Beverages
Description : Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles
Last Answer : Berl saddles
Description : Viscoelastic behaviour is observed in __________ materials. (A) Non-crystalline organic polymeric (B) Ceramic (C) All crystalline (D) All amorphous
Last Answer : Non-crystalline organic polymeric
Description : Ceramic compounds as compared to metallic compounds (A) Crystallise faster (B) Resist greater tensile stress at room temperature (C) Have higher melting temperature (D) Are better conductor of electricity at higher temperature
Description : Which of the following oxides is not present in hematite iron ore? (A) Titanium oxide (B) Calcium oxide (C) Cobalt oxide (D) Manganese oxide
Last Answer : (C) Cobalt oxide
Description : The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100
Last Answer : (A) 60
Description : Fertiliser plants get their N2 requirements (A) By fractionation of liquefied air (B) By dissociating oxides of nitrogen (C) From coal gas (coke oven gas) (D) From producer gas
Last Answer : (A) By fractionation of liquefied air
Description : Tolerable limit of nitrogen oxides in air is __________ ppm. (A) 0.1 (B) 1 (C) 5 (D) 25
Last Answer : (C) 5
Description : Which of the following is the most major constituents of air pollutants? (A) Oxides of sulphur (B) Oxides of nitrogen (C) Carbon monoxide (D) Hydrogen sulphide
Last Answer : (A) Oxides of sulphur
Description : Which of the following air pollutants is not toxic to vegetation i.e., doesn't cause vegetation damage? (A) Smog & ozone (B) Hydrogen fluoride & nitrogen oxides (C) Sulphur dioxide & spray of weed killers (D) Carbon monoxide
Last Answer : (D) Carbon monoxide
Description : Nitrogen oxides (NOx ) is not produced in the __________ industry. (A) Nitric acid making (B) Nitrogenous fertiliser (C) Detergent (D) Any of these
Last Answer : (C) Detergent
Description : Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone
Last Answer : (B) Silica gel
Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process
Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process
Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier
Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier
Description : Which of the following emissions in the exhaust gas of an I.C. engine causes the formation of photochemical smog? (A) Nitrogen oxides (B) Hydrocarbons (C) Both 'a' & 'b' (D) Carbon monoxide
Last Answer : (C) Both 'a' & 'b'
Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide